Anybus module for MODBUS-TCP 2 port.

EKIP COM ACTUATOR

Extra protection coat for Safeball.

IDFIX is an identifier circuit which gives each Pluto an address on the bus. It contains an identification code which can be read by the system. The identification code is declared in the PLC program so that the correct part of the PLC program is executed by each specific Pluto. The use of IDFIX is mandatory in a multi-Pluto project, but voluntary if a unit works alone. If one Pluto in a multi-Pluto project needs to be replaced it is possible to let the new Pluto selfload the PLC program from another Pluto on the bus. The IDFIX will ensure that the new Pluto has the correct address on the bus.

EKIP COM GPRS-M

EKIP COM IEC61850

SYSTEM CONTROLLER MDRC

Two-hand device with JSTD1-B Safeballs. Safeballs are side mounted on a 44x88 extruded aluminum profile designed for two-hand applications. Pre-wired to a M12-5 male connector with protective flanges of the safeballs.

IDFIX is an identifier circuit which gives each Pluto an address on the bus. It contains an identification code which can be read by the system. The identification code is declared in the PLC program so that the correct part of the PLC program is executed by each specific Pluto. The use of IDFIX is mandatory in a multi-Pluto project, but voluntary if a unit works alone. If one Pluto in a multi-Pluto project needs to be replaced it is possible to let the new Pluto selfload the PLC program from another Pluto on the bus. The IDFIX will ensure that the new Pluto has the correct address on the bus.

DNP31.0 DeviceNet Interface

MTQ22-FBP.0 ModbusTCP Interface for 4 devices

EKIP COM PROFIBUS