Showing 2353-2364 of 16,775 results

ABB - Installation Products · ABB
K656BSELR
15/25kV 600 Series Deadbreak Spiking Elbow with Spiking Contact, with Test Point.
Contact for Pricing

Contact for Pricing

ABB - Installation Products · ABB
K650S1-200
600 Amp, 15/25kv, Short Shank Bushing (2-15/16 inch) without stud, 200 BIL
Contact for Pricing

ABB - Installation Products · ABB
K655VSL3-N0410-S
15/25kV, 600 Amp, 3-Way Vault Stretcher Kit, Cable Insulation Diameter 1.515-1.780 inches, Aluminum Lug, Conductor Size 1000 Stranded/Compressed. With Sealing Kit.
Contact for Pricing

ABB - Installation Products · ABB
K650SOP-SP
15/25kV 600 Series Deadbreak Insulated Parking Bushing, Factory assembled Stud, which is not field removable.
Contact for Pricing

ABB - Installation Products · ABB
K656DRGN
600 Amp, 15/25kV, 600 Series Deadbreak Insulated Cap with Test Point (without Stud), with Ground.
Contact for Pricing

ABB - Installation Products · ABB
600CK
15-25-35 Kv 600 Amp Clamp-Gasket Kit, includes SAE 1008 Clamp, Bushing Notch Gasket and Instruction Sheet
Contact for Pricing

ABB - Installation Products · ABB
450-23-8
15-25-35 Kv Asssmbly Tapered Nose Cone for PCJs. Natural Color. Material HDPE or Delrin. Length 2.75 inch, Outside Diameter .82 inch. Wire Size #2.
Contact for Pricing

Panduit
PUP6AS04YL-GZ
Category 6A cable shall be constructed of 23 AWG copper conductorswith FEP insulation. The copper conductors shall be twisted in pairs andseparated by a cross-divider. All four pairs shall be surrounded by a nonconductiveAXT barrier tape and a flame retardant PVC (CMP) jacket.
Contact for Pricing
Minimum Qty: 9000
Multiplier: 1000
*Contact for lower quantities*

Panduit
PUP6AS04VL-GZ
Category 6A cable shall be constructed of 23 AWG copper conductorswith FEP insulation. The copper conductors shall be twisted in pairs andseparated by a cross-divider. All four pairs shall be surrounded by a nonconductiveAXT barrier tape and a flame retardant PVC (CMP) jacket.
Contact for Pricing
Minimum Qty: 27000
Multiplier: 1000
*Contact for lower quantities*

Panduit
PUP6004OR-WZ
Category 6 cable shall exceed the ANSI/TIA-568.2-D and IEC61156-5 Category 6 component standards. The conductorsshall be 23 AWG construction with FEPor polyolefin insulation.The copper conductors shall be twisted in pairs, separated bya cross-divider and covered by a low smoke, flame-retardant(CMP) jacket.
Contact for Pricing
Minimum Qty: 36000
Multiplier: 1000
*Contact for lower quantities*

Panduit
PFR6X04IG-CGZ
Category 6A cable shall be constructed of 23 AWG copperconductors with polyolefin insulation. The copper conductorsshall be twisted in pairs and separated by an integrated pairseparator. All four pairs shall be surrounded by an overall metallicfoil shield within a flame retardant PVC (CMR) jacket. The TX6AShielded Copper Cable must be installed as part of a completeTX6A Shielded Copper Cabling System to achieve 10GBASE-Tcertified performance.
Contact for Pricing
Minimum Qty: 9000
Multiplier: 1000
*Contact for lower quantities*