All Categories

Electrical Systems and Lighting and Components and Accessories and Supplies

Electrical Wire Management Devices And Accessories And Supplies

Wire Raceways Conduit and Busways

Subcategories

    Busway

    Busway Fitting And Accessories

    Cable Handler

    Cable Ladder

    Cable Tray

    Cable Tray Fitting And Accessories

    Electrical Conduit

    Electrical Conduit Coupling

    Electrical Conduit Elbow

    Electrical Conduit Fitting Body

    Electrical Conduit Nipple

    Electrical Wire Or Cable Raceway

    Wireway

    Wireway Fitting And Accessories

    Wiring Duct

    Wiring Duct Fitting And Accessories

    Wiring Trough

Showing 433-444 of 934 results

Panduit FIDT2X2LYL - The FiberRunner 1-Port Spillout is used with a 2x2 fitting. The spillout is used to route cable into one separate 1.5 inch (3.8mm) diameter split corrugated tubing.
Panduit

FIDT2X2LYL


The FiberRunner 1-Port Spillout is used with a 2x2 fitting. The spillout is used to route cable into one separate 1.5 inch (3.8mm) diameter split corrugated tubing.

Contact for Pricing

Minimum Qty: 20

Multiplier: 1

*Contact for lower quantities*

Panduit FRBC4X4LBL - Pre-assembled 4in x 4in QuikLock coupler quickly joins two sections of channel and/or fittings. Mechanically attaches without tightening bolts. Bolts release using 3/8in nut driver to allow coupler to be removed if necessary, Black, 1 piece.
Panduit

FRBC4X4LBL


Pre-assembled 4in x 4in QuikLock coupler quickly joins two sections of channel and/or fittings. Mechanically attaches without tightening bolts. Bolts release using 3/8in nut driver to allow coupler to be removed if necessary, Black, 1 piece.

Contact for Pricing

Minimum Qty: 5

Multiplier: 1

*Contact for lower quantities*

Panduit FRRF126RSCLYL - The FiberRunner Split Cover for the right reducer fitting has a snap-on feature that allows the cover to be installed and removed with no tools required. It creates a radiused 0.5 inch (12.7mm) opening for easy access to add or remove cables.

The FiberRunner Split Cover for the right reducer fitting has a snap-on feature that allows the cover to be installed and removed with no tools required. It creates a radiused 0.5 inch (12.7mm) opening for easy access to add or remove cables.

Contact for Pricing

Minimum Qty: 5

Multiplier: 1

*Contact for lower quantities*

Panduit FRFWCSC6LBL - The FiberRunner 6x4 4-Way Cross Cover is for the 4-way cross fitting. The cover creates openings for easy access to add or remove cables.

The FiberRunner 6x4 4-Way Cross Cover is for the 4-way cross fitting. The cover creates openings for easy access to add or remove cables.

Contact for Pricing

Panduit FREC4X4LYL - The FiberRunner 4x4 End Cap Fitting is used for closing off open ends of the channel or fittings. The end caps assist in creating a structure that protects fiber optic and high-performance copper data cabling from physical damage.
Panduit

FREC4X4LYL


The FiberRunner 4x4 End Cap Fitting is used for closing off open ends of the channel or fittings. The end caps assist in creating a structure that protects fiber optic and high-performance copper data cabling from physical damage.

Contact for Pricing

Minimum Qty: 5

Multiplier: 1

*Contact for lower quantities*

Panduit FRRF6FR4SCLBL - The FiberRunner Split Cover is for the 6x4 to 4x4 reducer fitting. The split cover has a snap-on feature that allows the cover to be installed and removed with no tools required. It creates a radiused 0.75 inch (19mm) opening for easy access to add or remove cables.

The FiberRunner Split Cover is for the 6x4 to 4x4 reducer fitting. The split cover has a snap-on feature that allows the cover to be installed and removed with no tools required. It creates a radiused 0.75 inch (19mm) opening for easy access to add or remove cables.

Contact for Pricing

Panduit FTR4X4LYL - The FiberRunner 3-Sided Vertical Tee Trumpet Spillout Fitting is used in cable routing systems to limit the bend radius of the cable to 2 inches (50.8mm) when exiting from a 4x4 or 6x4 FiberRunner Vertical Tee.
Panduit

FTR4X4LYL


The FiberRunner 3-Sided Vertical Tee Trumpet Spillout Fitting is used in cable routing systems to limit the bend radius of the cable to 2 inches (50.8mm) when exiting from a 4x4 or 6x4 FiberRunner Vertical Tee.

Contact for Pricing

Minimum Qty: 10

Multiplier: 1

*Contact for lower quantities*

Panduit FR1.5IDELBL - The FiberRunner 1-Port Spillout is used to route cable into 1.5 inch (38mm) diameter split corrugated tubing directly through a hole cut in the side wall. It is compatible with the 4x4, 6x4, and 12x4 FiberRunner Channel.

The FiberRunner 1-Port Spillout is used to route cable into 1.5 inch (38mm) diameter split corrugated tubing directly through a hole cut in the side wall. It is compatible with the 4x4, 6x4, and 12x4 FiberRunner Channel.

Contact for Pricing

Minimum Qty: 5

Multiplier: 1

*Contact for lower quantities*

Panduit FIDT4X4LBL - The FiberRunner 2-Port Spillout is used to route cable into one or two pieces of 1.5 (38mm) inside diameter split corrugated tubing.
Panduit

FIDT4X4LBL


The FiberRunner 2-Port Spillout is used to route cable into one or two pieces of 1.5 (38mm) inside diameter split corrugated tubing.

Contact for Pricing

Minimum Qty: 5

Multiplier: 1

*Contact for lower quantities*

Panduit FRSPJC26LBL - The FiberRunner Spill-Over Junction Cover is used to fully enclose 6x4 channel in conjunction with the FiberRunner Spill-Over Junction FRSPJ2X2LBL. The cover snaps onto the channel base. The hinged feature provides easy access to add or remove cables.

The FiberRunner Spill-Over Junction Cover is used to fully enclose 6x4 channel in conjunction with the FiberRunner Spill-Over Junction FRSPJ2X2LBL. The cover snaps onto the channel base. The hinged feature provides easy access to add or remove cables.

Contact for Pricing

Panduit FTR4X4LBL - The FiberRunner 3-Sided Vertical Tee Trumpet Spillout Fitting is used in cable routing systems to limit the bend radius of the cable to 2 inches (50.8mm) when exiting from a 4x4 or 6x4 FiberRunner vertical tee.
Panduit

FTR4X4LBL


The FiberRunner 3-Sided Vertical Tee Trumpet Spillout Fitting is used in cable routing systems to limit the bend radius of the cable to 2 inches (50.8mm) when exiting from a 4x4 or 6x4 FiberRunner vertical tee.

Contact for Pricing

Panduit FBC2X2LBL - Pre-assembled coupler quickly joins two sections of hinged channel and/or fittings. Mechanically attaches without tightening bolts. Bolts release using 5/16" nut driver to allow coupler to be removed if necessary, Black.
Panduit

FBC2X2LBL


Pre-assembled coupler quickly joins two sections of hinged channel and/or fittings. Mechanically attaches without tightening bolts. Bolts release using 5/16" nut driver to allow coupler to be removed if necessary, Black.

Contact for Pricing

Minimum Qty: 5

Multiplier: 1

*Contact for lower quantities*

Showing 433-444 of 934 results