15/25/35 kV, Copper Foil Tape - Cut, Carries Very Low Current. 6 inch Length, 0.375 inch Wide, 0.0026 inch Thick. Pressure Sensitive Conductive Acrylic Adhesive Tape with Backing.

Shield Plate, J3, 304 Stainless Steel, 12 inch x 3.5 inch x 16 Gage thick. No Holes.

Base Plate, 600 Amp Junctions, 15 inch x 6-3/4 inch x 5/8 inch thick with notched corners. 304 Stainless Steel. Two Rows of Three Slots 1 inch x 9/16 inch on 6 inch x 5-1/2 inch Centers.

Grounding Rod Adapter Assembly, Size N - Insulation Diameter Range 1.515 to 1.780 inch. includes Silicone Lubricant, Molded Housing, Grounding Rod and Instruction Sheet.

Hold Down Strap, 304 Stainless Steel 13 Gage, 3.25 inch x 2.985 inch. 3/8 inch Diameter Holes on 2.5 inch Center. Strap is 3/4 inch wide x .09 inch thick.

15/25 kV, 200 Amp Loadbreak, 4-Way Well Junction with Hold Down Straps, but without Stainless Steel Bracket

Base Plate, 600 Amp Junctions, 19 inch x 6-3/4 inch x 5/8 inch thick with notched corners. 304 Stainless Steel. Two Rows of Three Slots 1 inch x 9/16 inch on 8 inch x 5-1/2 inch Centers.

200 Amp, 15/25kV, Deadbreak Elbow, 3 Point Junction. Bails are required but not included, order separately. Center to Center spacing equals 4 inches.

15/25 kV, 200 Amp Loadbreak, 3-Way Well Junction with Hold Down Straps, but without Stainless Steel Bracket

Protective Shipping Cap for 200 Amp, 15/25 kV, Deadbreak Bushing, Black Elastimeric Polyethylene. Length 2.45 inch, Inside Diameter 1.885 to 1.210 inch. Flange.

200 Amp, 25kV, Loadbreak Extended Bushing Insert, Fully rotatable for 360 degree positioning. Includes bail assembly to secure feed-thru insert to bushing well.

Shield Plate, J4, 304 Stainless Steel, 16 inch x 3.5 inch x 16 Gage thick. No Holes.