nVent MAD0801230R5 Double Door Enclosure, MAD, 31.50x47.24x11.81, Lt Gray, Mild Steel
UPC: 783510486556
Contact for Pricing
Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.
Overview
- Material: Body: 1.5 mm mild steel. Gland plate: 1.4 mm mild steel. Door: 2 mm mild steel Mounting plate: 2 mm galvanized steel / 2.5 mm MAD1001030R5 and above.
- Body: Folded and seam welded. Four 8.5 mm diameter holes for wall fixing, pressed out in 20.4 mm diameter × 2 mm depressions, to allow air circulation around the rear part of the enclosure.
- Door: Surface mounted with 130° opening. Concealed removable hinges with captive pin. Inner M6 welded studs to mount door profiles MMDP. Two removable mounting profiles on the right hand door and two on the left hand door. Sealing is ensured by an injecte
- Lock: Customized lock with double-bit for easy opening of the door. Double-bit 3 mm insert and 90° movement. Espagnolette three point locking. Other inserts are available as an accessory.
- Mounting plate: The mounting plate is marked vertically at 10 mm intervals, for easy horizontal positioning of equipment. On the top and bottom there are holes to facilitate cable fixing. Fixed onto M8 press welded studs to the rear of the enclosure. All
- Gland Plate Opening: Situated at the far rear of the enclosure, to make cabling onto the mounting plate easier.
- Protection: IP 55, TYPE 12, IK 10. For outdoor installation, the use of a rain hood, ARF, and 100% polyester paint coating plus corrosion protection primer is recommended. Resistance to corrosion must be taken into consideration for outdoor and indoor app
- Finish: RAL 7035 structured powder coating.
- Delivery: Enclosure with doors and mounting plate (not included for item numbers ending with PER5). Two door mounting profiles on each door. Gland plate(s) with gasket(s), metallic double-bit 3 mm key, and mounting accessories. Earthing facilities.
- Mounting plate: All sides, from 800 mm and above, are strengthened by folded edges
Specifications
Application | Controls and Drives;Factory Automation and Process Control |
Body Thickness | 1.5 mm |
Body Thickness | 16 ga |
Cable Entry | No |
Color | Light Gray;RAL 7035 Light Gray |
Color | Light Gray |
Color | Gray |
Color | Grey |
Color Code | RAL 7035 |
Construction | Body: 16 gauge Door: 14 gauge |
Cubic Capacity | 10 in3 |
Cubic Capacity | 163871 mm3 |
Depth | 300 mm |
Depth | 11.81 in |
Door Thickness | 14 ga |
Finish | Powder Coated |
Gland Plate Opening Depth | 3.78 in |
Gland Plate Opening Width | 12.2 in |
Gland Plate Opening Width | 20.08 in |
Gland Plate Type | 4 |
Height | 800 mm |
Height | 31.5 in |
Insulation | No |
Latch Quantity | 1 |
Material | Mild Steel |
Material Quality | Mild Steel |
Max Mounting Depth | 11.1 in |
Mounting | Wall Mounted |
Mounting Plate Included | Yes |
NEMA Rating | NEMA Type 12 NEMA Type 13 |
NEMA Rating | 12;13 |
Number of Gland Plate Openings | 2 |
Number Of Outlet | 1 |
Panel Size | 30.31 x 45.28 in |
Panel Size | 72.00 x 72.00 in |
Protection Rating | NEMA Type 12 |
Size | 31.5 x 47.24 x 11.81 inch |
Type | Mild Steel Wall Mounted Industrial Enclosures |
Weight | 140.77 lb |
Weight | 32 lbs./100ft |
Width | 47.24 in |
Width | 1,200 mm |
With or Without Panel | With |
Package Dimensions (L x W x H) | 47.62 IN x 31.87 IN x 12.44 IN |
Package Dimensions (L x W x H) | 120.9548 cm x 80.9498 cm x 31.5976 cm |
Package Weight (Imperial) | 140.770 L |
Package Weight (Metric) | 63.853 kg |
LT20D-NEW
1/2 Inch, 90 Degree, Two-Piece Liquidtight Non-Metallic Fitting, UL E32447, Temperatures up to 107 Degrees C, Nitril Rubber O-Ring, PVC, Grey
LN43DA
1/2 Inch, Straight, One-Piece Liquidtight Non-Metallic Fitting, CSA, UL E32447, Temperatures up to 60 Degrees C, PVC, Grey
LH38
Cord Grip with NPT Threads, Locknut Included, NPT Thread Size 3/8 Inch, Cable Range 0.181 Inch/4.6mm to 0.312 Inch/7.9mm, Hole Clearance 0.670 Inch/17.0mm, Thread Length 0.53 Inch/13.5mm, IP68 Rating, Nylon, Black
Frequently Asked Questions
What are the dimensions of the MAD0801230R5 enclosure?
The enclosure has a height of 31.5 inches, a width of 47.24 inches, and a depth of 11.81 inches.
What material is the MAD0801230R5 enclosure made from?
The enclosure body is made of 1.5 mm mild steel, the gland plate is 1.4 mm mild steel, and the door is 2 mm mild steel.
What is the color and finish of the enclosure?
The enclosure has a RAL 7035 structured powder coating in light gray.
What is the protection degree of the MAD0801230R5 enclosure?
The enclosure has an IP 55 protection degree, is Type 12 rated, and IK 10.
What industry standards does the MAD0801230R5 enclosure meet?
It is UL 508A Listed, Type 12; cUL Listed per CSA C22.2 No.0, No.0.4, No.14, No.94, Type 12; NEMA/EEMAC Type 12; CSA, File No. 1442951: Type 12; IEC 62208 IP55; and CE, UK CA, UL, DNV.
Does the MAD0801230R5 enclosure come with a mounting plate?
Yes, the enclosure is delivered with a mounting plate, except for item numbers ending with PER5.
What type of locking mechanism does the enclosure use?
It features a customized lock with a double-bit 3 mm insert and 90° movement, utilizing an espagnolette three-point locking system.
What are the dimensions of the mounting plate?
The panel size for the mounting plate is 30.31 x 45.28 inches.
What is the maximum mounting depth inside the enclosure?
The maximum mounting depth is 11.1 inches.
How many gland plate openings are there?
There are two gland plate openings, each with a width of 20.08 inches and a depth of 3.78 inches.
How to Install the MAD0801230R5 Controller
This guide provides step-by-step instructions for installing and configuring the MAD0801230R5 Controller, ensuring proper wiring and calibration.
Estimated time: 45m
Tools needed:
Screwdriver, Wire strippers, Multimeter
Supplies needed:
Mounting screws, Terminal connectors
- Prepare the installation area
Ensure the installation area is clear and free of debris. If mounting on a combustible surface, install a floor plate of at least 1.43 mm galvanized or 1.6 mm uncoated steel, extending at least 150 mm beyond the equipment on all sides.
- Mount the controller
Secure the MAD0801230R5 Controller to the DIN rail using the integrated clips. Ensure the controller is level and firmly attached.
- Connect the wiring
Use terminal connectors to connect the power supply and input/output wires to the corresponding terminals on the controller. Verify all connections are secure and correctly oriented.
- Power on the controller
Turn on the power supply to the controller. Use a multimeter to verify that the voltage levels are within the specified range.
- Configure the controller settings
Access the controller's configuration interface and input the necessary parameters according to your application requirements. Save the settings.
- Calibrate the controller
Follow the calibration procedure outlined in the user manual to ensure accurate operation. Adjust settings as necessary based on the calibration results.
Frequently Asked Questions about nVent
What industries and applications are nVent products used for?
nVent products are engineered for critical infrastructure and industrial applications across multiple demanding sectors. Key markets include Construction, Data Centers, Defense, Healthcare, Mining, Oil & Gas Refineries, Power Plants, Rail/Transit, Renewable Energy, Security, Ship Building, Steel Mills, Telecom, and Utilities. Their solutions are designed to withstand extreme environmental conditions, with temperature ranges from -55°C to 105°C and specialized features like UV resistance, oil resistance, and flame resistance.
What environmental ratings do nVent products have?
nVent enclosures feature comprehensive environmental ratings, including UL 508A, CSA, and NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications. They are rated IEC 60529 IP66, providing robust protection against dust, water, and corrosion in both indoor and outdoor environments. These products operate effectively in temperatures ranging from -40°F to 266°F, with enhanced UV inhibitors for outdoor weathering and oil-resistant gaskets for superior sealing.
What accessories are available for nVent products?
nVent offers a comprehensive range of accessories across multiple product lines, including EMC accessories like bonding cable clamps and strain reliefs, inline accessories such as lock inserts and mounting brackets, CONCEPT accessories including panel conversion kits and rack-mount angles, and seismic accessories for specialized mounting requirements. Key accessory categories include grounding kits, DIN rail mounting solutions, panel supports, handles, and various mounting hardware compatible with different enclosure types.
What certifications and standards do nVent products comply with?
nVent products meet critical international certifications including UL (United States), CSA (Canada), CE (European Community), and EAC (Russia). Our products are designed to comply with rigorous industrial standards such as NEMA enclosure ratings, IEC 60529 IP ratings, and international safety standards across multiple industrial markets including oil & gas, power, manufacturing, and infrastructure.
What is nVent's warranty policy?
nVent offers a standard 18-month warranty from invoicing date for most automation products, covering defects in workmanship and materials. The warranty requires proper transportation, handling, storage, and installation within specified environmental conditions. Warranty coverage includes repair or replacement at nVent's discretion, with certain conditions such as authorized service repairs and operation within designed capacity limits.
What technical support does nVent offer?
nVent offers comprehensive technical support through multiple global contact centers across North America, South America, Europe, Middle East, India, and Asia. Customers can reach technical experts by phone at regional numbers, with the North American headquarters in Minneapolis, MN providing primary support at +1.763.421.2240. Additionally, nVent provides online support resources through their website, including CAD drawing downloads and an 'Ask The Expert' feature to assist with product technical inquiries.