nVent MAD1201230R5 Double Door Enclosure, MAD, 47.24x47.24x11.81, Lt Gray, Mild Steel
UPC: 783510486723
Contact for Pricing
Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.
Overview
- Material: Body: 1.5 mm mild steel. Gland plate: 1.4 mm mild steel. Door: 2 mm mild steel Mounting plate: 2 mm galvanized steel / 2.5 mm MAD1001030R5 and above.
- Body: Folded and seam welded. Four 8.5 mm diameter holes for wall fixing, pressed out in 20.4 mm diameter × 2 mm depressions, to allow air circulation around the rear part of the enclosure.
- Door: Surface mounted with 130° opening. Concealed removable hinges with captive pin. Inner M6 welded studs to mount door profiles MMDP. Two removable mounting profiles on the right hand door and two on the left hand door. Sealing is ensured by an injecte
- Lock: Customized lock with double-bit for easy opening of the door. Double-bit 3 mm insert and 90° movement. Espagnolette three point locking. Other inserts are available as an accessory.
- Mounting plate: The mounting plate is marked vertically at 10 mm intervals, for easy horizontal positioning of equipment. On the top and bottom there are holes to facilitate cable fixing. Fixed onto M8 press welded studs to the rear of the enclosure. All
- Gland Plate Opening: Situated at the far rear of the enclosure, to make cabling onto the mounting plate easier.
- Protection: IP 55, TYPE 12, IK 10. For outdoor installation, the use of a rain hood, ARF, and 100% polyester paint coating plus corrosion protection primer is recommended. Resistance to corrosion must be taken into consideration for outdoor and indoor app
- Finish: RAL 7035 structured powder coating.
- Delivery: Enclosure with doors and mounting plate (not included for item numbers ending with PER5). Two door mounting profiles on each door. Gland plate(s) with gasket(s), metallic double-bit 3 mm key, and mounting accessories. Earthing facilities.
- Mounting plate: All sides, from 800 mm and above, are strengthened by folded edges
Specifications
Application | Controls and Drives;Factory Automation and Process Control |
Application | Factory Automation and Process Control; Controls and Drives |
Body Thickness | 1.5 mm |
Body Thickness | 16 ga |
Cable Entry | No |
Color | Light Gray;RAL 7035 Light Gray |
Color | Gray |
Color | Grey |
Color | Lt Gray |
Color | Light Gray |
Color Code | RAL 7035 |
Construction | Body: 16 gauge Door: 14 gauge |
Cubic Capacity | 15 in3 |
Cubic Capacity | 245806.5 mm3 |
Depth | 300 mm |
Depth | 11.81 in |
Door Thickness | 14 ga |
Finish | Powder Coated |
Gland Plate Opening Depth | 3.78 in |
Gland Plate Opening Width | 20.08 in |
Gland Plate Opening Width | 12.2 in |
Gland Plate Type | 4 |
Height | 1,200 mm |
Height | 47.24 in |
Insulation | No |
IP Rating | IP55 |
Latch Quantity | 1 |
Material | Mild Steel |
Material Quality | Mild Steel |
Max Mounting Depth | 11.1 in |
Mounting | Wall Mounted |
Mounting Plate Included | Yes |
Mounting Type | Wall Mount |
Mounting Type | Wall-mount |
NEMA Rating | NEMA Type 12 NEMA Type 13 |
NEMA Rating | 12;13 |
Number of Gland Plate Openings | 2 |
Number Of Outlet | 1 |
Panel Size | 72.00 x 72.00 in |
Panel Size | 46.06 x 45.28 in |
Protection Rating | NEMA Type 12 |
Series | MAD |
Size | 47.24x47.24x11.81 |
Size | 47.24x47.24x11.81 in. |
Size | 47.24 x 47.24 x 11.81 inch |
Type | Mild Steel Wall Mounted Industrial Enclosures |
Weight | 224.77 lb |
Weight | 32 lbs./100ft |
Width | 1,200 mm |
Width | 47.24 in |
With or Without Panel | With |
Package Dimensions (L x W x H) | 47.62 IN x 47.62 IN x 12.44 IN |
Package Dimensions (L x W x H) | 120.9548 cm x 120.9548 cm x 31.5976 cm |
Package Weight (Imperial) | 224.770 L |
Package Weight (Metric) | 101.956 kg |
BX4
Sealable and transparent protective covers BX4 and non-removable BX4-CA to protect the devices against accidental contact.
LT20D-NEW
1/2 Inch, 90 Degree, Two-Piece Liquidtight Non-Metallic Fitting, UL E32447, Temperatures up to 107 Degrees C, Nitril Rubber O-Ring, PVC, Grey
LN43DA
1/2 Inch, Straight, One-Piece Liquidtight Non-Metallic Fitting, CSA, UL E32447, Temperatures up to 60 Degrees C, PVC, Grey
LH38
Cord Grip with NPT Threads, Locknut Included, NPT Thread Size 3/8 Inch, Cable Range 0.181 Inch/4.6mm to 0.312 Inch/7.9mm, Hole Clearance 0.670 Inch/17.0mm, Thread Length 0.53 Inch/13.5mm, IP68 Rating, Nylon, Black
Frequently Asked Questions
What are the dimensions of the MAD1201230R5 enclosure?
The enclosure has dimensions of 47.24 inches in height, 47.24 inches in width, and 11.81 inches in depth.
What industry standards does the MAD1201230R5 enclosure meet?
It meets UL 508A Listed Type 12, cUL Listed Type 12, NEMA/EEMAC Type 12, CSA Type 12, IEC 62208 IP55, and is CE, UK CA, UL, DNV certified.
What is the protection degree of this enclosure?
The enclosure has an IP 55 protection degree, is Type 12 rated, and IK 10 rated.
What material is the MAD1201230R5 enclosure made from?
The enclosure body is made of 1.5 mm mild steel, the gland plate is 1.4 mm mild steel, and the door is 2 mm mild steel.
What is the finish and color of the enclosure?
The enclosure has a RAL 7035 structured powder coating in a light gray color.
Does the enclosure come with a mounting plate?
Yes, the enclosure is delivered with a mounting plate, except for item numbers ending with PER5.
What are the dimensions of the mounting plate?
The panel size for the mounting plate is 46.06 x 45.28 inches, with a maximum mounting depth of 11.1 inches.
How do the doors open and what type of hinges are used?
The doors are surface mounted with a 130° opening and use concealed removable hinges with a captive pin.
What type of locking mechanism does the enclosure use?
It features a customized lock with a double-bit 3 mm insert and 90° movement, utilizing an espagnolette three-point locking system.
What are the dimensions of the gland plate opening?
The gland plate opening has a width of 20.08 inches and a depth of 3.78 inches, with two openings available.
How to Install the MAD1201230R5 Controller
This guide provides step-by-step instructions for installing and configuring the MAD1201230R5 Controller on a DIN rail.
Estimated time: 45m
Tools needed:
Screwdriver, Wire strippers, Multimeter
Supplies needed:
Mounting screws, Terminal connectors
- Mount the controller
Secure the MAD1201230R5 controller to the DIN rail using the integrated clips. Ensure the controller is level and firmly attached.
- Connect the power supply
Using the terminal connectors, connect the power supply wires to the designated input terminals on the controller. Verify that the connections are secure and correctly oriented.
- Configure initial settings
Power on the controller and use the interface to access the configuration menu. Set the required parameters according to your system specifications and save the settings.
- Calibrate the controller
Follow the calibration procedure outlined in the user manual to ensure accurate readings and performance. Use a multimeter to verify output signals during calibration.
Frequently Asked Questions about nVent
What industries and applications are nVent products used for?
nVent products are engineered for critical infrastructure and industrial applications across multiple demanding sectors. Key markets include Construction, Data Centers, Defense, Healthcare, Mining, Oil & Gas Refineries, Power Plants, Rail/Transit, Renewable Energy, Security, Ship Building, Steel Mills, Telecom, and Utilities. Their solutions are designed to withstand extreme environmental conditions, with temperature ranges from -55°C to 105°C and specialized features like UV resistance, oil resistance, and flame resistance.
What environmental ratings do nVent products have?
nVent enclosures feature comprehensive environmental ratings, including UL 508A, CSA, and NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications. They are rated IEC 60529 IP66, providing robust protection against dust, water, and corrosion in both indoor and outdoor environments. These products operate effectively in temperatures ranging from -40°F to 266°F, with enhanced UV inhibitors for outdoor weathering and oil-resistant gaskets for superior sealing.
What accessories are available for nVent products?
nVent offers a comprehensive range of accessories across multiple product lines, including EMC accessories like bonding cable clamps and strain reliefs, inline accessories such as lock inserts and mounting brackets, CONCEPT accessories including panel conversion kits and rack-mount angles, and seismic accessories for specialized mounting requirements. Key accessory categories include grounding kits, DIN rail mounting solutions, panel supports, handles, and various mounting hardware compatible with different enclosure types.
What certifications and standards do nVent products comply with?
nVent products meet critical international certifications including UL (United States), CSA (Canada), CE (European Community), and EAC (Russia). Our products are designed to comply with rigorous industrial standards such as NEMA enclosure ratings, IEC 60529 IP ratings, and international safety standards across multiple industrial markets including oil & gas, power, manufacturing, and infrastructure.
What is nVent's warranty policy?
nVent offers a standard 18-month warranty from invoicing date for most automation products, covering defects in workmanship and materials. The warranty requires proper transportation, handling, storage, and installation within specified environmental conditions. Warranty coverage includes repair or replacement at nVent's discretion, with certain conditions such as authorized service repairs and operation within designed capacity limits.
What technical support does nVent offer?
nVent offers comprehensive technical support through multiple global contact centers across North America, South America, Europe, Middle East, India, and Asia. Customers can reach technical experts by phone at regional numbers, with the North American headquarters in Minneapolis, MN providing primary support at +1.763.421.2240. Additionally, nVent provides online support resources through their website, including CAD drawing downloads and an 'Ask The Expert' feature to assist with product technical inquiries.