nVent F66WG - Gasket and Screws Feed-Through, fits 6.00x6.00, Black, Neoprene
nVent

F66WG

UPC: 783510146108

Documents & Media
Installation Instructions

Contact for Pricing

Overview

The nVent F66WG Gasket and Screws Feed-Through Kit is an essential accessory for expanding and connecting nVent Hoffman Type 12 and 3R Fiberglass Wireway systems. Designed to seamlessly integrate with 6.00 x 6.00 inch (152 x 152 mm) wireway sections, this kit provides the necessary components to ensure secure and sealed joints, maintaining the integrity of your cable management infrastructure. When additional hardware is required for joining wireway sections, the F66WG kit offers a reliable solution. This specific kit includes a durable black neoprene gasket and a set of screws, engineered to meet the demanding requirements of industrial environments. The oil-resistant cover gasket, pre-attached with oil-resistant adhesive, and the solid oil-resistant flange gasket work in conjunction with the pultruded fiberglass polyester construction of the wireway to provide superior protection against corrosive elements and harsh conditions. This makes it ideal for applications where wires and cables are exposed to chemicals, oils, or significant environmental challenges. The nVent Hoffman Fiberglass Feed-Through Wireway system, for which this kit is designed, adheres to stringent industry standards, including NEMA Type 12, 3R, and IEC 60529, IP55. It also meets UL 94-5V flammability rating and the UL cold impact test for temperatures down to -35°C, ensuring safety and longevity. The wireway itself features sealed seams, no holes or knockouts, captivated Monel cover screws, and stainless steel flange screws, all contributing to a robust and maintenance-free installation. The gray interior and exterior finish provides a professional aesthetic. By utilizing the F66WG kit, installers can confidently extend their wireway runs, create complex configurations, and ensure that the environmental protection offered by the nVent Hoffman system is not compromised at connection points. This is particularly crucial in sectors such as chemical processing, manufacturing, food and beverage, and outdoor installations where cable protection is paramount. Trust nVent Hoffman for high-quality, durable solutions that safeguard your critical electrical infrastructure.
  • Feed-Through Gasket and Screws kit are used when additional hardware is needed
  • Includes one black neoprene gasket and one set of screws for joining sections
  • Ensures sealed and secure connections, maintaining wireway integrity
  • Oil-resistant gasket provides protection in corrosive or dirty environments
  • Compatible with NEMA Type 12, 3R and IEC 60529, IP55 rated wireways

Specifications

Application
Power Distribution
Color
Black
Finish
Smooth Matte
Height
44 IN
Height
6
Height
152
IP Rating
IP55
IP Rating
IP54
Material
Neoprene
Material
Neoprene;Steel
Modification Services
Yes
Nema Rating
Type 12, 3R
NEMA Rating
12 Indoor, dust-resistant
NEMA Rating
12
Protection Rating
NEMA Type 12
Series
nVent F66WG
Size
6.00x6.00
Size
6.00x6.00 inches
Thickness
0.12 in
Thickness
51.40mm (2.024")
Type
Gasket Kit
Type
Gasket Kit;Industrial Feed-Through Wireway
Weight
0.4 lb
Width
6
Width
152
Width
23 IN
Wireway
Feed-Through NEMA Type 12 Wireway
Package Dimensions (L x W x H)
12 IN x 10 IN x 1 IN
Package Dimensions (L x W x H)
30.48 cm x 25.4 cm x 2.54 cm
Package Weight (Imperial)
0.400 L
Package Weight (Metric)
0.181 kg
Gasket and Screws Feed-Through, fits 8.00x8.00, Black, Neoprene

F88WG

Gasket and Screws Feed-Through, fits 8.00x8.00, Black, Neoprene
N12 Wireway, Cut-Off Fitting, Lay-In - Fits 12 x 6 - Steel/Gray

1485FW1

N12 Wireway, Cut-Off Fitting, Lay-In - Fits 12 x 6 - Steel/Gray
Wire Safe Fitting - 6 inch X 6 Inch External Coupling.

EGCER

Wire Safe Fitting - 6 inch X 6 Inch External Coupling.
Twin-70 raceway base, 10 foot length. Supplied with pre-punched mounting holes. 2' of cover needed for every 1' of Twin-70 base.

T702BIW10

Twin-70 raceway base, 10 foot length. Supplied with pre-punched mounting holes. 2' of cover needed for every 1' of Twin-70 base.

How to Install the Feed-Through Wireway

This guide provides step-by-step instructions for installing and configuring the Feed-Through Wireway, ensuring proper assembly and secure connections.

Estimated time: 1h

Tools needed:

Screwdriver, Drill, Wire strippers

Supplies needed:

Mounting screws, Gaskets, Nuts, Lockwashers

  1. Assemble the wireway sections

    Place a gasket between the flanges of the wireway sections and secure them together using screws and nuts as shown in the assembly details.

  2. Install the telescope fitting

    Assemble the telescope fitting parts in the correct order, insert the body into the straight section, and adjust to the desired length. Ensure the gasket is properly positioned against the flange.

  3. Anchor the telescope fitting

    Drill .25 inch diameter holes through the straight section and telescope fitting at the desired extension. Install .25−20x.5 screws through the holes from the outside and secure with cap nuts and lockwashers.

  4. Cut off the wireway to length

    Cut the wireway body to the desired length, ensuring a square cut. Weld the extra flange to the body and grind off any burrs or sharp edges.

  5. Install swivel nipples

    Position the wireway section, flange gasket, swivel ring, and swivel nipple in the correct order. Secure them with screws and nuts, ensuring all components are tightly fastened.

  6. Make box entries

    Cut out the necessary openings in the enclosure for box entries as shown in the details. Position the box connector and gasket inside the enclosure, and ensure proper sealing with additional gaskets.

  7. Install hangers

    Assemble the hangers as shown in the details, ensuring they are positioned correctly and securely attached to the wireway flanges.

Frequently Asked Questions about nVent

What industries and applications are nVent products used for?

nVent products are engineered for critical infrastructure and industrial applications across multiple demanding sectors. Key markets include Construction, Data Centers, Defense, Healthcare, Mining, Oil & Gas Refineries, Power Plants, Rail/Transit, Renewable Energy, Security, Ship Building, Steel Mills, Telecom, and Utilities. Their solutions are designed to withstand extreme environmental conditions, with temperature ranges from -55°C to 105°C and specialized features like UV resistance, oil resistance, and flame resistance.

What environmental ratings do nVent products have?

nVent enclosures feature comprehensive environmental ratings, including UL 508A, CSA, and NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications. They are rated IEC 60529 IP66, providing robust protection against dust, water, and corrosion in both indoor and outdoor environments. These products operate effectively in temperatures ranging from -40°F to 266°F, with enhanced UV inhibitors for outdoor weathering and oil-resistant gaskets for superior sealing.

What accessories are available for nVent products?

nVent offers a comprehensive range of accessories across multiple product lines, including EMC accessories like bonding cable clamps and strain reliefs, inline accessories such as lock inserts and mounting brackets, CONCEPT accessories including panel conversion kits and rack-mount angles, and seismic accessories for specialized mounting requirements. Key accessory categories include grounding kits, DIN rail mounting solutions, panel supports, handles, and various mounting hardware compatible with different enclosure types.

What certifications and standards do nVent products comply with?

nVent products meet critical international certifications including UL (United States), CSA (Canada), CE (European Community), and EAC (Russia). Our products are designed to comply with rigorous industrial standards such as NEMA enclosure ratings, IEC 60529 IP ratings, and international safety standards across multiple industrial markets including oil & gas, power, manufacturing, and infrastructure.

What is nVent's warranty policy?

nVent offers a standard 18-month warranty from invoicing date for most automation products, covering defects in workmanship and materials. The warranty requires proper transportation, handling, storage, and installation within specified environmental conditions. Warranty coverage includes repair or replacement at nVent's discretion, with certain conditions such as authorized service repairs and operation within designed capacity limits.

What technical support does nVent offer?

nVent offers comprehensive technical support through multiple global contact centers across North America, South America, Europe, Middle East, India, and Asia. Customers can reach technical experts by phone at regional numbers, with the North American headquarters in Minneapolis, MN providing primary support at +1.763.421.2240. Additionally, nVent provides online support resources through their website, including CAD drawing downloads and an 'Ask The Expert' feature to assist with product technical inquiries.