Panduit Z22C-SS Pre-Configured Network Zone System, 24" x 24" mild steel enclosure, for one industrial…
UPC: 074983364978
Contact for Pricing
Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.
Overview
- Pre-configured solution reduces planning, design, procurement, and installation time.
- Includes 8 Cat 6A STP copper patch cords and Mini-Com copper modules.
- Features 2 MM LC fiber patch cords with 6 LC adaptors for fiber connectivity.
- 24" x 24" mild steel enclosure with isolation barrier and grounding provisions.
- Integrated cable management with strain relief bar and adjustable ring managers.
Specifications
Application | Industrial Automation |
Color | Gray |
Depth | 11.6 In. |
Material | Mild Steel |
Mounting | Wall mount |
Standard | UL 508A Standard for Industrial Control Panels, UL Type 4/12 or 4X, IP66 Rated, RoHS Compliant |
Type | Pre-Configured Network Zone System Enclosure |
Width | 24 In. |
Package Dimensions (L x W x H) | 44 IN x 44 IN x 17 IN |
Package Weight (Imperial) | 170 lbs |
Z23U-S25S
Universal Network Zone System; 24" x 36"; mild steel enclosure; for two industrial switches; includes (16) Cat 6A STP copper patch cords and jacks, (4) MM LC fiber uplink patch cords with (6) adaptors, redundant power supplies and (2) maintenance-free UPS's
Z23C-6
Pre-Configured Network Zone System, 24" x 36", 316 stainless steel enclosure, for two industrial switches, includes (16) Cat 6 UTP copper patch cords and jacks, (4) MM LC fiber patch cords with (6) adaptors, backplane and cable management. NEMA 4X/4/12, IP66
DIRLC25S23W
The air inlet duct directs cooling air from the cold aisle into the intake fans of switches. It fits in a 3 RU footprint and is designed for Cisco Catalyst 6880 switch.
CUEOR12CPW1
The Net-Contain End of Row Cap is part of the Universal Aisle Containment system for cold aisle or hot aisle contaiment in a floor-mounted structure compatible with most cabinet brands and sizes. The End of Row Cap is for 4-foot (1200mm) aisle widths. It is white.
FCP9PP-2323GG
The rack-mount fiber optic splitter tray fits in 19" racks, occupies 1 RU, and uses a planar lightwave circuit to split one signal to thirty-two signals for passive optical network applications. The splitter tray includes two SC-APC inputs and thirty-two SC-APC outputs on the front of the device.
DIRLC3210S17W
The air inlet duct directs cooling air from the cold aisle into the intake fans of switches. It requires 3 RU above the switch and 2 RU below the switch and is designed for Cisco Catalyst 6807-XL switch.
FCP9PP-2163GG
The rack-mount fiber optic splitter tray fits in 19" racks, occupies 1 RU, and uses a planar lightwave circuit to split one signal to sixteen signals for passive optical network applications. The splitter tray includes two SC-APC inputs and sixteen SC-APC outputs on the front of the device.Frequently Asked Questions
What are the dimensions of the Z23C-SS enclosure?
The Z23C-SS enclosure dimensions are 36.0 in. x 24.0 in. x 11.7 in. (914mm x 610mm x 297mm).
What is the maximum operating temperature?
The enclosure is validated to operate at a maximum temperature of 140°F (60°C).
What materials are used for the Z23C-SS enclosure?
The enclosure is made of gray 14 gauge cold roll steel or 316 stainless steel.
What safety features does the Z23C-SS include?
It includes an isolation barrier to segregate high voltage from lower voltage equipment for safety.
What standards does the Z23C-SS comply with?
The Z23C-SS complies with UL 508A, UL Type 4/12 or 4X, and is IP66 rated.
What is the humidity rating for the Z23C-SS?
The enclosure can operate at up to 95% non-condensing humidity.
How is the Z23C-SS mounted?
The Z23C-SS can be wall-mounted with an optional outside-mount flange.
What accessories are included with the Z23C-SS?
Included accessories are DIN rails, cable management components, and an isolation barrier.
What is the purpose of the removable back plate?
The removable back plate with DIN rails allows for rapid installation of components.
What type of power supply is required?
The Z23C-SS is designed for use in an EtherNet/IP zone architecture with a compatible power supply.
How to Install the Z22C-SS Network Zone System
Installation guide for mounting and wiring the Z22C-SS Network Zone System enclosure.
Estimated time: 1h
Tools needed:
Latch Tool, Screwdriver (#2 Phillips, 3/16", 2.5mm flathead), 3/8" socket or box wrench, Tools to cut enclosure sidewalls (e.g., Greenlee punch), Drill, Level
Supplies needed:
Mounting feet kit (if applicable), 5/16" bolts (for steel enclosure), 3/8" bolts (for stainless-steel enclosure), #6 AWG Infrastructure ground cable, Fiber-optic trunk cable, LC fiber-optic connectors, Fiber-optic termination tools, Category 6 copper cable, Copper cable termination tools, Power wiring (#14 AWG recommended), Rigid conduit, Silicone rubber sealant (if required for NSF certification)
- Prepare the Enclosure
Open the enclosure door by turning both locks toward each other using the Latch Tool. If reversing the door, remove hinge pins, screws, and hinges. Drill new hole locations on the opposite side, reinstall hinges and screws, then turn the door 180 degrees and mount it to the opposite side. Insert pins to secure the door. Install screws and sealing washers in the original hinge hole locations.
- Install Mounting Feet (Optional)
Turn the enclosure on its side with locks oriented toward the top. Install the Wall Mounting Feet into the back of the enclosure, aligning the threaded studs with the holes. Insert sealing washers into the holes from the outside, with the tapered cone toward the hole. Turn the enclosure upright. Thread nuts onto the mounting foot studs and tighten to 200 in-lbs.
- Mount the Enclosure
Determine the mounting location. If using mounting feet, drill holes 22.5" apart horizontally and 25.56" apart vertically. If mounting directly to the wall without feet, drill holes 22.5" apart horizontally and 22.5" apart vertically. Mount the enclosure securely to the wall using appropriate bolts (5/16" for steel, 3/8" for stainless steel) or Unistrut. If required for NSF certification, seal the perimeter between the enclosure and the back mounting surface with silicone rubber sealant.
- Install Internal Components (if applicable)
For Universal Network Zone Systems, remove wires from terminal blocks and then remove the terminal blocks. Install the customer-supplied switch according to the switch manufacturer's instructions and the supplied Field Wiring Diagram. Install the supplied ground wire to the switch. Do not apply power prior to terminal block removal and switch installation.
- Connect Power and Uplink/Downlink Cables
Refer to the Field Wiring Diagram supplied inside the unit for specific wiring instructions. Connect power entry, uplink entry, and downlink entry cables using appropriate conduit and connectors. Ensure all connections are secure and meet local electrical codes. For customer-supplied switch power input wiring, use #14 AWG recommended wire and connect to the Field-Wiring Terminal.
- Route Patch Cords and Finalize
Route fiber-optic and copper patch cords through the designated management features. Connect the Zone SYS to the uplink using the provided CAT6 copper patch cords or LC fiber patch cords as applicable. Close and secure the enclosure door by turning the locks.
Frequently Asked Questions about Panduit
What environmental ratings do Panduit products have?
Panduit products feature comprehensive environmental ratings across multiple standards, including UL 508A Type 1, 2, 3, 4, 4X, 12, and 13; CSA Type 1, 2, 3, 4, 4X, 12, and 13; and NEMA Type 1, 2, 3, 4, 4X, 12, and 13. They meet IEC 60529 IP66 rating, providing robust protection against dust, water, and corrosion in both indoor and outdoor environments, with operating temperatures ranging from -40°C to 130°C.
What certifications and standards do Panduit products comply with?
Panduit products are certified to multiple critical industry standards, including UL (Underwriters Laboratories) in the USA and Canada, CSA (Canadian Standard Association), EN IEC 61386, LVD 2006/G5/EC, and ARRA standards. Our products meet rigorous certifications for electrical safety, environmental compliance (WEEE and RoHS), and are designed to perform in extreme temperatures ranging from -55°C to 105°C, making them suitable for demanding industrial environments.
What industries and applications are Panduit products used for?
Panduit products are engineered for critical applications across multiple industries, including commercial construction, food and beverage, oil and gas, renewable energy, transportation, and safety-critical environments. Their solutions span electrical infrastructure, wire management, cable ties, power connectors, and safety systems designed to withstand extreme conditions like high vibration, temperature variations, UV exposure, and corrosive agents. Key industries include solar and wind energy, aerospace, heavy trucking, military, commercial transportation, and industrial manufacturing.
What are the main product lines offered by Panduit?
Panduit offers a comprehensive range of electrical infrastructure products including power connectors, cable ties, grounding connectors, identification products, safety solutions, terminals, cable cleats, wiring duct, and cable tie accessories. These products are engineered for industrial environments across multiple sectors like commercial construction, food and beverage, oil and gas, renewable energy, transportation, and safety applications.
What are the key features of Panduit products?
Panduit products are engineered for robust performance in heavy-duty industrial environments, featuring a comprehensive range of solutions including cable ties, power connectors, terminals, and identification products. Key features include proven quality performance, subject matter expertise, and customer-driven innovation across multiple industrial sectors such as commercial construction, food and beverage, oil and gas, renewable energy, transportation, and safety applications. The product line is designed to maximize productivity, reliability, and safety while meeting stringent industry standards.
What is Panduit's warranty policy?
Panduit provides a comprehensive Limited Product Warranty that can be fully reviewed on their official website at www.panduit.com/warranty. All Panduit products are subject to the terms, conditions, and limitations of this current warranty. Customers are advised to review the specific warranty details for their particular product, as Panduit requires buyers to determine product suitability for their intended use and assumes all associated risks.
What technical support does Panduit offer?
Panduit offers comprehensive technical support through their dedicated customer service team, accessible via phone at 1-800-777-3300. They provide expert assistance for their full range of industrial infrastructure products, including cable ties, power connectors, terminals, and identification solutions. Customers can also access additional technical resources and product information through their website at www.panduit.com.
What accessories are available for Panduit products?
Panduit offers a wide range of accessories across multiple product lines, including cable ties, cable tie accessories, cable tie tools, identification products, cable cleats, grounding connectors, and VeriSafe accessories like the VeriSafe Network Module and Insulation Piercing Connectors. For a comprehensive view of all available accessories, customers are recommended to visit www.panduit.com for the full product catalog.
How are Panduit products typically installed?
Panduit products are engineered for comprehensive installation across industrial environments, utilizing specialized tools and techniques for precise mounting. Installation methods vary by product line - from cable ties and power connectors to terminals and identification solutions - but all are designed for robust performance in heavy-duty settings. Technicians typically use Panduit's dedicated installation tools and follow manufacturer guidelines available at www.panduit.com to ensure proper fitting and maximum infrastructure reliability.