Your Authorized Panduit Source in the Midwest

PN10-10RN-D

Ring Terminal, 12 10 AWG, #10 narrow stud size, nylon insulated, bulk package.

UTP28X3GY

The TX6A-28 Cat 6A UTP Patch Cord is a 3-Foot, 0.185-inch (4.7mm) diameter, Grey cord constructed of 28 AWG unshielded, twisted pair, solid, CM/LSZH cable with high-performance modular plugs. Its compact 28 AWG design simplifies installation and management. The tangle-free latch prevents snags and ensures a fast release, streamlining moves, adds, and changes. Enabled with RapidID, the product has pre-installed barcodes for simple port mapping using RapidID software.

N8RCFR

N-Type Front and Rear Cage Nut Equipment Rail Kit for 48 RU Cabinet

S8822BF

Net-Access S-Type Cabinet frame with top panel. Single hinge perforated front door. Split perforated rear doors open in the middle to minimize door swing footprint. Solid side panels (2), casters, POU brackets (1 set), cage nut rails (2 sets). Cable management fingers (1 set). Dimensions: 90.3H x 31.5W x 48.0D (2292mm x 800mm x 1200mm). Color: Black

P12B19M

This Panduit G5 Basic PDU features (12) 5-20R outlets. It is a 20 amp, 120 V, single phase PDU with a NEMA 5-20P input plug and a 10 foot (3m) power cord. The PDU is black.

P32E06G

The Panduit G6 Monitored Switched PDU features (24) C13 and (8) C19 outlets. It is a Dual Rated 30/32 amp, 240/230V, single phase PDU with IEC 60309 2P+E 6h 30/32A (IP44) input plug and a 10 foot (3m) power cord. The PDU is black.

CJ688TGBU-24

The Mini-Com Cat 6 UTP RJ45 TG Jack Module is designed to terminate 4-pair, 22-26 AWG twisted pair cable. Each module is 100% factory tested to exceed industry standard performance requirements. TG style termination eliminates the need for a termination tool. Each jack is individually serialized for traceability and is compatible with Mini-Com Modular Patch Panels and Faceplates. The jack module is blue and includes 24 per package.

CEG-11X1

The Cable Entry Systems offer a safe, organized method to transition cable and hoses through enclosures and electrical equipment, providing strain relief while maintaining IP/NEMA ingress sealing ratings. The CEG-11X1 is a small Cable Entry Grommet, is for cable diameters 0.43" (10.9 mm) to 0.47" (11.9 mm). Color is Black TPE and the Standard Package Quantity is 12 PC.

MSGK

Grounding Jumper Kit for use with the PanZone Multi-Purpose Wall and In-Ceiling Enclosures.

PLC2H-S25-TL

Pan-Ty locking clamp tie, light-heavy cross section, 1/4 (M6) screw, 9.0 (229mm) length, nylon 6.6, natural, bulk package.

P42D06M

This Panduit G5 Monitored Input PDU features (36) C13 and (6) C19 outlets. It is a 32 amp, 230 V, single phase PDU with an IEC 60309 2P+E 6h 32A (IP44) input plug and a 10 foot (3m) power cord.

H200X064H3T

Black, 3/8" diameter polyolefin, 500/roll.

P08E16M

This Panduit G5 Monitored Switched PDU features (8) 5-20R outlets. It is a 20 amp, 120 V, single phase PDU with a NEMA L5-20P input plug and a 10 foot (3m) power cord.

DNE8822W

The Net-Verse D-Type Cabinet is a 48 RU, 800mm W x 1200mm D cabinet. The front door is a single hinge perforated door. It features split perforated rear doors. It includes horizontally split side panels, two full-length PDU brackets and casters. The cabinet is 91.0" H x 31.5" W x 47.2"D (2311 mm x 800 mm x 1200 mm). It is white.

PUL6004WH-KE

The TX6000 Cat 6 U/UTP LSZH copper cable is constructed of 23 AWG copper conductors with HDPE insulation. The copper conductors shall be twisted in pairs and separated by a cross divider. All four pairs shall be covered by a flame retardant HDPE (LSZH), White jacket. Packaged 1000 ft./305m in an easy payout carton.

PUL6004WH-FE

The TX6000 Enhanced Cat 6 U/UTP copper cable is constructed of 23 AWG copper conductors with HDPE insulation. The copper conductors are twisted in pairs and separated by a cross divider. All four pairs are surrounded by a HDPE flame-retardant jacket. The white, LSZH (IEC 60332-1, IEC 60332-3-22, EuroClass Dca-s2,d2,a1) cable is supplied 305 meters (1,000 feet) to an easy pay-out carton.

P12E20G

The Panduit G6 Monitored Switched PDU features (12) 5-20R outlets. It is a 15 amp, 120 V, single phase PDU with a NEMA 5-15P input plug and a 10 foot (3m) power cord. The PDU is black.

PUL6AHD04BU-EG

The TX6A Cat 6A U/UTP copper cable is constructed of 23 AWG copper conductors with HDPE insulation. The copper conductors are twisted in pairs and separated by a flat divider. All four pairs are surrounded by a Vari-MaTriX Tape and a flame-retardant HDPE flame-retardant jacket. The Blue, LSZH (IEC 60332-3) cable is supplied 305 meters (1,000 feet) to a reel.

C275X125YMT

Thermal transfer component label, 2.75" W x 1.25" H, polyester, silver, 1 label/row, 2500 pc. package quantity.

E21D10M

This Panduit Monitored Input PDU is designed for versatile power distribution, featuring (18)C13, (3)C19, providing unparalleled flexibility in device connectivity. The PDU is equipped with an 16A, Single Phase, IEC 60309 2P+E 6h (IP44) input plug for a secure and reliable connection. A 10-foot (3m) power cord adds to its installation convenience.