Contact for Pricing
Overview
- Permanently mounted for continuous safety monitoring
- Tests for absence of voltage in 3-phase AC systems up to 600V
- Improves safety by preventing exposure to electrical hazards
- Reduces downtime with efficient lockout/tagout procedures
- Includes 10' sensor leads, 8' system cable, and industrial lithium battery
Specifications
Application | For use in 1, 2 or 3-phase AC or DC systems |
Frequency Rating | 50 Hz |
Phase | 1 Ph, 2Ph & 3 Ph |
Standard | UL 1436, UL 508, CSA-C22.2 No. 14, CAN/CSA-C22 No.160, CAN/CSA-C22.2 No.107.1, IEC/UL/CSA C22.2 No. 61010-1, IEC/UL.CSA C22.2 No 61010-2-030, IEC 61508-1, -2 and -3 (SIL Rating) |
Type | Absence of Voltage Tester |
Voltage Rating | 600 V |
Package Dimensions (L x W x H) | 16.77 IN x 10.11 IN x 3.58 IN |
Package Weight (Imperial) | 3.95 lbs |
VS-AVT-C08-L10A
The VS-AVT-C08-L10A VeriSafe 1.0 Absence of Voltage Tester is a permanently mounted voltage tester for use in 3-phase AC systems up to 600 V. Activating VeriSafe performs an absence of voltage test before opening the panel, helping prevent possible exposure to electrical hazards, improving safety, and reducing downtime. This SKU includes a three-phase AVT tester equipped with 3.0m sensor leads, 2.4m system cable and an industrial lithium battery. Optimized for APAC markets.
VS-AVT-C02-L03
The VS-AVT-C02-L03 VeriSafe 1.0 Absence of Voltage Tester is a permanently mounted voltage tester for use in 3-phase AC systems up to 600 V. Activating VeriSafe performs an absence of voltage test before opening the panel, helping prevent possible exposure to electrical hazards, improving safety, and reducing downtime. This SKU includes a three-phase AVT tester equipped with 2' system cable, 3' sensor leads and an industrial lithium battery.
VS-AVT-RKP1
The VS-AVT-RKP1 VeriSafe AVT Retrofit Kit is the complete kit to retrofit equipment with the VeriSafe Absence of Voltage Tester. Activating VeriSafe performs an absence of voltage test before opening the panel, helping prevent possible exposure to electrical hazards and improving safety. Kit includes AVT tester with 10ft. sensor leads, 8ft. system cable, VeriSafe Insulation Piercing Connection Kit 14-6 AWG power connectors, (12) cable ties, (6) cable ties mounts, (1) wire marker card.
VS-AVT-RKP2
The VS-AVT-RKP2 VeriSafe AVT Retrofit Kit is the complete kit to retrofit equipment with the VeriSafe Absence of Voltage Tester. Activating VeriSafe performs an absence of voltage test before opening the panel, helping prevent possible exposure to electrical hazards and improving safety. Kit includes AVT tester with 10ft. sensor leads, 8ft. system cable, VeriSafe Insulation Piercing Connection Kit 4- 3/0 AWG power connectors, (12) cable ties, (6) cable ties mounts, (1) wire marker card.
VS-AVT2-C02L03
VeriSafe Absence of Voltage Tester for Class 1 Division 2 hazardous locations - 2 ft. system cable, 3 ft. sensor leads.
VS-AVT2-C08L10
The VS-AVT2-C08L10 VeriSafe Absence of Voltage Tester is the first-of-its-kind voltage tester that determines the absence of voltage with just a push of a button for Class 1 Division 2 hazardous locations. Activating VeriSafe performs an absence of voltage test before opening the panel, helping prevent possible exposure to electrical hazards, improving safety, and reducing risk. Includes AVT tester equipped with 10' sensor leads, 8' system cable, and industrial Lithium battery.
Frequently Asked Questions
What is the voltage range for FSD77-10-D?
The FSD77-10-D operates on 24V DC with a range of 20-28V DC.
Is the FSD77-10-D compatible with other Panduit products?
Yes, the FSD77-10-D is compatible with various Panduit wiring ducts and cable management solutions.
What is the EMI protection capability?
The FSD77-10-D includes EMI noise shielding that provides up to 20dB reduction in noise, enhancing performance.
How do I install the FSD77-10-D?
Installation requires user-supplied DIN rail and fasteners, with specific mounting clips for corner wiring duct.
How does the FSD77-10-D improve space optimization?
The FSD77-10-D is designed to maximize space utilization within control panels, allowing for more components in a smaller footprint.
Can I use the FSD77-10-D in harsh environments?
Yes, the FSD77-10-D is designed for harsh environments, ensuring reliable performance under challenging conditions.
What safety precautions should I take?
Always follow recommended safety precautions to prevent harm and ensure a safe working environment.
What maintenance is required for the FSD77-10-D?
Regular inspection and maintenance are recommended to ensure optimal performance, but specific maintenance tasks are not detailed.
What are the temperature operating requirements?
The product is designed to operate within a specified temperature range, but the exact range is not provided in the document.
What is the standard package quantity for the FSD77-10-D?
The standard package quantity for the FSD77-10-D is not explicitly stated in the document.
How to Install the VeriSafe Absence of Voltage Tester (VS-AVT-C08-L10)
This guide provides step-by-step instructions for installing and configuring the VeriSafe Absence of Voltage Tester to ensure safe operation in electrical systems.
Estimated time: 45m
Tools needed:
Screwdriver, Wire strippers, Multimeter
Supplies needed:
Mounting screws, Terminal connectors, AVT System Cable
- Mount the Isolation Module
Secure the Isolation Module to the DIN rail or surface using screws. Ensure it is level and firmly attached.
- Connect Sensor Leads
Terminate the sensor leads to the corresponding circuit conductors (L1, L2, L3, GND) using approved connectors. Ensure that each lead is securely connected and not mechanically joined with others.
- Install the Indicator Module
Insert the Indicator Module into a standard 30 mm knockout in the electrical enclosure. Ensure the notch is positioned at the top for proper alignment.
- Connect the AVT System Cable
Use the included AVT System Cable to connect the Isolation Module to the Indicator Module. Ensure the cable is routed away from sensor leads and other circuits by at least 0.25 inches.
- Ground the System
Ensure the Isolation Module is properly grounded to the protective conductor terminal of the enclosure. Verify that all connections are secure.
- Verify Installation
Use a multimeter to check the absence of voltage at the test point. Ensure that the green Absence of Voltage Indicator illuminates when the test is performed.
- Label the Installation
Mark the test location on the yellow Instruction Label and apply it to the outside of the enclosure near the Indicator Module.
Frequently Asked Questions about Panduit
What environmental ratings do Panduit products have?
Panduit products feature comprehensive environmental ratings across multiple standards, including UL 508A Type 1, 2, 3, 4, 4X, 12, and 13; CSA Type 1, 2, 3, 4, 4X, 12, and 13; and NEMA Type 1, 2, 3, 4, 4X, 12, and 13. They meet IEC 60529 IP66 rating, providing robust protection against dust, water, and corrosion in both indoor and outdoor environments, with operating temperatures ranging from -40°C to 130°C.
What certifications and standards do Panduit products comply with?
Panduit products are certified to multiple critical industry standards, including UL (Underwriters Laboratories) in the USA and Canada, CSA (Canadian Standard Association), EN IEC 61386, LVD 2006/G5/EC, and ARRA standards. Our products meet rigorous certifications for electrical safety, environmental compliance (WEEE and RoHS), and are designed to perform in extreme temperatures ranging from -55°C to 105°C, making them suitable for demanding industrial environments.
What industries and applications are Panduit products used for?
Panduit products are engineered for critical applications across multiple industries, including commercial construction, food and beverage, oil and gas, renewable energy, transportation, and safety-critical environments. Their solutions span electrical infrastructure, wire management, cable ties, power connectors, and safety systems designed to withstand extreme conditions like high vibration, temperature variations, UV exposure, and corrosive agents. Key industries include solar and wind energy, aerospace, heavy trucking, military, commercial transportation, and industrial manufacturing.
What are the main product lines offered by Panduit?
Panduit offers a comprehensive range of electrical infrastructure products including power connectors, cable ties, grounding connectors, identification products, safety solutions, terminals, cable cleats, wiring duct, and cable tie accessories. These products are engineered for industrial environments across multiple sectors like commercial construction, food and beverage, oil and gas, renewable energy, transportation, and safety applications.
What are the key features of Panduit products?
Panduit products are engineered for robust performance in heavy-duty industrial environments, featuring a comprehensive range of solutions including cable ties, power connectors, terminals, and identification products. Key features include proven quality performance, subject matter expertise, and customer-driven innovation across multiple industrial sectors such as commercial construction, food and beverage, oil and gas, renewable energy, transportation, and safety applications. The product line is designed to maximize productivity, reliability, and safety while meeting stringent industry standards.
What is Panduit's warranty policy?
Panduit provides a comprehensive Limited Product Warranty that can be fully reviewed on their official website at www.panduit.com/warranty. All Panduit products are subject to the terms, conditions, and limitations of this current warranty. Customers are advised to review the specific warranty details for their particular product, as Panduit requires buyers to determine product suitability for their intended use and assumes all associated risks.
What technical support does Panduit offer?
Panduit offers comprehensive technical support through their dedicated customer service team, accessible via phone at 1-800-777-3300. They provide expert assistance for their full range of industrial infrastructure products, including cable ties, power connectors, terminals, and identification solutions. Customers can also access additional technical resources and product information through their website at www.panduit.com.
What accessories are available for Panduit products?
Panduit offers a wide range of accessories across multiple product lines, including cable ties, cable tie accessories, cable tie tools, identification products, cable cleats, grounding connectors, and VeriSafe accessories like the VeriSafe Network Module and Insulation Piercing Connectors. For a comprehensive view of all available accessories, customers are recommended to visit www.panduit.com for the full product catalog.
How are Panduit products typically installed?
Panduit products are engineered for comprehensive installation across industrial environments, utilizing specialized tools and techniques for precise mounting. Installation methods vary by product line - from cable ties and power connectors to terminals and identification solutions - but all are designed for robust performance in heavy-duty settings. Technicians typically use Panduit's dedicated installation tools and follow manufacturer guidelines available at www.panduit.com to ensure proper fitting and maximum infrastructure reliability.