Authorized NSI Industries Distributor
NSI Industries SGB-39040 - Split Bushing, Insulated, Grounding, Zinc Die Cast, Size 4 Inch, 6-250 Lug

NSI Industries SGB-39040 Split Bushing, Insulated, Grounding, Zinc Die Cast, Size 4 Inch, 6-250 Lug

UPC: 781747939050


Documents & Media
Installation InstructionsSpecification SheetVideo ClipWarrantyConflict Minerals Report

Contact for Pricing

Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.

Overview

The NSI Industries SGB-39040 is a 4-inch insulated grounding split bushing, constructed from durable zinc die cast. This bushing is designed for situations where wires have already been pulled through conduit or EMT fittings, and an insulated grounding bushing is required. The split design allows for post-wire pull installation, simplifying installation by eliminating the need to thread the bushing onto the conduit, especially beneficial in tight spaces. The integral grounding lug, made from aluminum alloy 6061-T6 with a tin electro-plate finish, is securely attached to prevent loss and ensure a dependable connection. The insulator is rated for 150°C (302°F) and meets Federal Specification A-A-50553 and NEMA Standard FB-1. It is cULus listed to UL514B and UL467 specifications. The SGB-39040 is ideal for bonding stub-ups or in data applications. Dimensions: A=2.99", B=4.47", C=0.73", D=3.87", E=5.00".
  • Split design for post-wire pull installation
  • Accommodates 6-250 kcmil copper or aluminum conductors
  • Durable zinc die cast construction
  • Integral aluminum alloy grounding lug with tin electro-plate
  • Rated 150°C (302°F), cULus listed to UL514B and UL467

Specifications

Application
aluminum alloy 6061-T6. Rated 150 Degree C. cULus listed. Patented. Now featuring UV Stabilized Insulators and Stainless Steel Hardware, perfect for solar and other outdoor installations!;Used in situations where wires have already been pulled through Rigid/IMC conduit, and an insulated bushing is required. Grounding lug
Application
Used in situations where wires have already been pulled through Rigid/IMC conduit, and an insulated bushing is required. Grounding lug; aluminum alloy 6061-T6. Rated 150 Degree C. cULus listed. Patented. Now featuring UV Stabilized Insulators and Stainless Steel Hardware, perfect for solar and other outdoor installations!
Color
Grey with Black Insulator
Finish
Ball burnish
Material
Zinc alloy
Material
Zinc Die Cast
Mounting Type
Screw with Nylon Locking Patch and Cone Point
Series
SGB
Size
4 IN
Special Features
Grounding Lug Wire Capacity # 6 - #250
Standard
cULus
Temperature Rating
150?°C
Temperature Rating, Maximum
302 F
Temperature Rating, Maximum
150 C
Temperature Rating, Minimum
302 F
Temperature Rating, Minimum
150 C
Trade Size
4 in
Type
Split
Package Weight (Imperial)
0.687 L
Package Weight (Metric)
0.312 kg
Split Bushing, Insulated, Grounding, Zinc Die Cast, Size 1-1/2 Inch,, 14-1/0 Lug

SGB-385CL

Split Bushing, Insulated, Grounding, Zinc Die Cast, Size 1-1/2 Inch,, 14-1/0 Lug
1-1/4 Inch Nickel Plated Brass Conduit Entry Gland

SPL40/E

1-1/4 Inch Nickel Plated Brass Conduit Entry Gland
Split Bushing, Insulated, Grounding, Zinc Die Cast, Size 1-1/2 Inch, 14-4 Lug

SGB-38514

Split Bushing, Insulated, Grounding, Zinc Die Cast, Size 1-1/2 Inch, 14-4 Lug
Split Bushing, Insulated, Grounding, Zinc Die Cast, Size 1-1/4 Inch, 14-4 Lug

SGB-38414

Split Bushing, Insulated, Grounding, Zinc Die Cast, Size 1-1/4 Inch, 14-4 Lug
Threadless Bushing, Insulated, Grounding, Malleable Iron, Size 3/4 Inch

TL-382

Threadless Bushing, Insulated, Grounding, Malleable Iron, Size 3/4 Inch
Threadless Bushing, Insulated, Grounding, Malleable Iron, Size 1 Inch

TL-383

Threadless Bushing, Insulated, Grounding, Malleable Iron, Size 1 Inch
Threadless Bushing, Insulated, Grounding, Malleable Iron, Size 3-1/2 Inch, 6-250 Lug

TL-38940

Threadless Bushing, Insulated, Grounding, Malleable Iron, Size 3-1/2 Inch, 6-250 Lug
Split Bushing, Insulated, Grounding, Zinc Die Cast, Size 3-1/2 Inch, 14-1/0 Lug

SGB-389CL

Split Bushing, Insulated, Grounding, Zinc Die Cast, Size 3-1/2 Inch, 14-1/0 Lug

Frequently Asked Questions

What is the standard package quantity for SGB-39040?

The standard package quantity for the SGB-39040 is 20 units.

What are the dimensions of the SGB-39040 bushing?

The dimensions are A: 2.99 in, B: 4.47 in, C: 0.73 in, D: 3.87 in, and E: 5.00 in.

What is the trade size of the SGB-39040 bushing?

The SGB-39040 bushing has a trade size of 4 inches.

Is the SGB-39040 suitable for outdoor installations?

Yes, it features UV Stabilized Insulators and Stainless Steel Hardware, making it perfect for solar and other outdoor installations.

What certifications does the SGB-39040 hold?

The SGB-39040 is cULus listed to UL514B and UL467 specifications, and meets Federal Specification Number A-A-50553 and NEMA Standard FB-1.

What is the temperature rating for the SGB-39040?

The SGB-39040 grounding bushing is rated for a maximum temperature of 150 Degree C.

What materials are used for the SGB-39040 bushing?

The bushing is made from Zinc Alloy. The grounding lug is aluminum alloy 6061-T6 with a tin electro-plate finish.

What is the primary application of the SGB-39040 bushing?

The SGB-39040 bushing is used when wires have already been pulled through conduit or EMT fittings and an insulated grounding bushing is required.

What materials are used for the SGB-39040 bushing?

The bushing is made from Zinc Alloy. The grounding lug is aluminum alloy 6061-T6 with a tin electro-plate finish.

What is the standard package quantity for SGB-39040?

The standard package quantity for the SGB-39040 is 20 units.

How to Install the Mighty-BOND Split Grounding/Bonding Bushing

This guide details the installation of the Mighty-BOND Split Grounding/Bonding Bushing, a UL Listed component designed for use with threaded Rigid or Intermediate Metal Conduit and fittings, uniquely allowing installation after conductors are pulled.

Estimated time: 15m

Tools needed:

Screwdriver

Supplies needed:

Grounding or bonding conductor

  1. Position the Bushing

    Open the Mighty-Bond™ split bushing and place it around the conductors, positioning it onto the top of the RMC, IMC, or fitting threaded end.

  2. Close and Align the Bushing

    Close the Mighty-Bond™ bushing and align it to access the set screw, grounding lug, and hinge screw. Ensure the set screw is backed out sufficiently for the two halves to close fully on the threaded conduit or fitting, and that the bushing is as far down on the conduit or fitting threads as possible.

  3. Secure the Bushing

    Tighten the hinge screw first, then the set screw. If applicable, tighten the enclosure bonding screw. Tighten all screws to UL Torque requirements (35 in lb).

  4. Connect the Grounding Conductor

    Insert the appropriate sized grounding or bonding conductor into the lug. Refer to the provided table for the UL Recommended lug screw torque based on the wire range (e.g., 10-14 AWG/MCM Copper/10-12 AWG Aluminum: 35 in lbs; 8 AWG Copper/Aluminum: 40 in lbs; 4-6 AWG Copper/Aluminum: 45 in lbs; 2/0-3 AWG Copper/Aluminum: 50 in lbs) and tighten the screw accordingly.

Frequently Asked Questions about NSI Industries

How are Tork products typically installed?

Tork products are typically installed by trained technicians who follow a comprehensive commissioning process. This includes verifying the work environment, conducting electrical installation checks, performing internal and external equipment inspections, powering on the system, and executing operational tests to ensure compatibility and reliability.

What environmental ratings do Tork products have?

Tork products are designed to meet various environmental ratings, including NEMA Type 4X and Type 6, which provide protection against corrosion, windblown dust, rain, and occasional temporary submersion. These ratings ensure that Tork products can withstand harsh industrial environments while maintaining operational integrity.

What communication protocols do Tork products support?

Tork products support a comprehensive range of communication protocols, including PROFIBUS DP V1, PROFINET with dual port, EtherNet/IP with dual port, CANopen, and Modbus RTU integrated as standard. These protocols facilitate flexible network integration and high-performance communication across various industrial automation systems.

What are the key features of Tork products?

Tork products are designed with advanced features that enhance efficiency and reliability in industrial applications. Key features include integrated harmonics and EMC design for improved power quality, removable terminals for quick installation, and USB ports for easy troubleshooting. Additionally, Tork solutions emphasize user-friendly setup with application wizards and memory modules for convenient parameter management.

What are the main product lines offered by Tork?

Tork offers a diverse range of products primarily focused on industrial automation, including TORK® Photocontrols, lighting controls, and various electrical components such as enclosures, occupancy sensors, and grounding solutions. These products are designed to enhance efficiency and reliability in commercial and industrial applications.

What technical support does Tork offer?

Tork offers a comprehensive range of technical support services, including 24/7 customer support, on-site service management, and a technical hotline network. With three advanced technical support centers and over 8,000 hours of technical training conducted annually, Tork ensures certified expertise across 25+ languages to assist customers effectively. Their commitment to service is reflected in a 98% Service Level Agreement compliance rate, providing reliable support for all operational needs.

What industries and applications are Tork products used for?

Tork products are utilized across a variety of industries, including food processing, healthcare, hospitality, and manufacturing. They are designed for applications such as hand hygiene, surface cleaning, and dispensing solutions, ensuring efficiency and compliance in environments that require high standards of cleanliness and safety.

What certifications and standards do Tork products comply with?

Tork products comply with UL and cUL certifications, ensuring they meet rigorous safety and performance standards. Additionally, many models are designed to meet NEMA enclosure ratings, providing protection against environmental factors.

How are Remke products typically installed?

Remke products are typically installed through a systematic process that includes site audits to verify proper wiring, followed by remote or on-site commissioning. This commissioning involves installation verification, programming, and communication testing to ensure the system operates reliably and meets design specifications.

What accessories are available for Remke products?

Remke offers a wide range of accessories for their products, including panel mounting kits, fuse holders for voltage inputs, ferrites for communication modules, and current transformers. These accessories enhance the functionality and protection of Remke's industrial automation solutions, ensuring reliable performance in various applications.