Your Authorized NSI Industries Source in Wisconsin & Midwest United States

SPM-24L

Service Post Connector - Two Wire Type 4 STR Service Post Connectors is used for connecting one or two conductors. Made from high copper content hard-drawn rod. Lay-in feature makes them excellent for continuous loop grounding and bonding. Used to ground to bar or plate. Suitable for direct burial in earth or concrete.

IT-2

The Polaris IT-2 Multi-Tap Single-Side Entry Connector features 2 ports sized for 2 AWG to 14 AWG wires. The body is made from aluminum alloy wrapped in a layer of plastisol insulation. Each port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Dual rated for use with copper or aluminum cables. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.

CD15A

U-Type Compression Die - White 300 MCM Copper - 4/0 AWG Aluminum U-Shaped Compression Dies are for use with the NSi-12 Compression Tool and Other Tools. See Cross-Reference Chart below.

GL60058

1 Hole Short Barrel Copper Compression Lug w/ Peep Hole 600 MCM - 5/8" Bolt Short Barrel Copper Compression Lugs with Peep Hole is a type of copper compression connector that is produced from high conductivity copper tubing. They are tin-plated to provide corrosion resistance and are marked with die index and color coded for easy reference. Listed for 35KV maximum when properly installed.

AM-R1-H12

Power Distribution Block (1) 500 MCM-4 AWG Primary (12) 4-14 AWG Secondary Power Distribution Blocks are made of high strength, high-conductivity aluminum alloy and are mounted in a high-strength glass-filled polyester base. Each block can stand alone or combine with other blocks to form a multi-block set.

ITG-3/0

The Polaris ITG-3/0 Grey Multi-Tap Single Side Entry Connector features 2 ports sized for 3/0 - 4 AWG Class B, C or D wires or 2/0 - 2 AWG Class K, M or I wires. The body is made from aluminum alloy wrapped in a layer of plastisol insulation. Each port is specially designed for fine-stranded copper wires and pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of splicing fine-stranded wire applications, including installation in cable trays, troughs, wire-ways, raceways, ducts and motor junction boxes.

RSR-600

Cord Grip, alum, 2 IN NPT with solid bushing, Form Size 6

TGA12K

Cobra TripleGrip, Triple Grip Anchor, 3/8 x 4 in. drill size, 12 x 1-1/2 in. screw size, Plastic, 132 LBS (5/8 in. Drywall) Kit Box

RSR-518-L

Cordgrip Alum 1-1/2 IN NPT 1.00 - 1.125 Size 5 w/ln

D1060MW

Interval Timer 60 Min 120V White

MSC15

Aluminum Fold Over Strap 1/4" Hole Cable Size 8/3

JWNCF4

Wing Nut, #10-24 in. size, Steel construction, Light Zinc Plated finish, TYPE A grade, 1 per pack

2120-S

Hanger, Conduit, Bolt, Stainless Steel, Trade Size 2

100019C

ezEX48 Connector. 10/Clamshell.

IPLD2/0-4

The Polaris IPLD2/0-4 Multi-Tap Dual-Sided Entry Black Connector features 4 ports sized for 2/0 AWG - 14 AWG wires. The body is made from aluminum alloy wrapped in a layer of plastisol insulation. Each dual-sided port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.

GRP-850

The PowerGRP GRP-850 100-Count Resealable Pack of Type 21S AH-2 Natural-Colored General-Purpose Cable Ties are 8†long, with 50lb of tensile strength for professional applications. They’re made from polyamide 6,6 nylon, resulting in a high mechanical strength and a wide temperature range (-40 F to 185 F). Fasten these 8†cables ties around a wide range of equipment with a bundle diameter between .12†(3mm) and 2.09†(53mm), using the bent tips and serrated locking mechanism to form an effortless and secure grip. Designed for cable management in industrial applications and use in plenum spaces.

DIN200B

The TORK DIN200B 7-Day DIN-Mounted Digital Timer is designed for DIN rain mounting in indoor or outdoor applications. Automate your home or office to save energy and money using the intuitive programming interface and light sensitive activation to activate lights or signage when the ambient light level drops below a customizable threshold. Features two output channels and SPDT dry contracts, rated for 120VAC and 50/60Hz Input. Designed for applications in the home, office or panel building such as indoor/outdoor lighting, security systems or HVAC equipment.

IPCS4002

Insulation Piercing Connector 4/0 - 3 AWG Insulation piercing connectors are made for use with copper-copper, copper to aluminum and aluminum to aluminum applications. They are safe to use and are completely insulated, no need to strip wire. They can be installed on energized conductors with no contact at any point. No spacer required between connections. Exclusive "turbo spacer" keeps tap side open while main conductor is being tightened. Watertight and corrosion-free.

CNN1032K

Cage Nut Kit, #10-32 Size, 50 piece(s), 5/8 in. length, Pan head, Slotted/Phillips/Square drive type, Lead Point, Black Phosphate finish, including a(n) #10-32 Cage Nuts and #10-32 x 5/8 in. Pan Head Screw. For use with Telecom Cabinets, Relay Racks and Patch Panels KIT

TCB300

The Cable Prowler Tester combines network testing (physical layer and link), cable verification & troubleshooting and PoE voltage testing in a handheld tester with a full-color display; all with the capability of saving and printing tests results from a personal computer. It provides full cable testing on any category network, coax, or telephone cable. It will display wire map, numbered ID remotes, and any faults, including shorts, opens, miswires, split pairs, and reverses, The full-featured Cable Prowler measures cable length (using TDR technology) and generates tone levels for signal tracing and cable identification on all pairs, a selected pair, or a selected pin. It also enables quick identification of a network drops link capability and current link status. Cable Prowler also tests the presence of PoE on the network drop and what class of PoE per IEEE 802.3 af/at with load test for voltage drop. Stored in a nylon hanging pouch and includes: Cable Prowlerâ„¢ main unit, #1 Network/Telcom Cable Tester Smart Remote, Set #1-5 Network ID Only Remotes & Coax ID Only Remotes, No-Fault Cable RJ12, Micro USB Cables, 1 F Female to F Female Adapter, Quick Start Guide & Warranty Card