Authorized NSI Industries Distributor
NSI Industries ITO-4 - The Polaris ITO-4 Multi-Tap Offset Dual-Side Entry Connector features 2 ports sized for 4 - 14 AWG wires. The body is made from aluminum alloy wrapped in a layer of plastisol insulation. Each port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.

NSI Industries ITO-4 The Polaris ITO-4 Multi-Tap Offset Dual-Side Entry Connector features 2 ports sized for…

UPC: 662381950024


Documents & Media
Technical Bulletin

Contact for Pricing

Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.

Overview

The NSI Industries Polaris ITO-4 Multi-Tap Offset Dual-Side Entry Connector is a pre-insulated, two-port splicing solution engineered for secure, in-line connections between 4-14 AWG copper or aluminum conductors. Designed for installation in cable trays, panel boards, ducts, raceways, or troughs, this connector eliminates the need for tape, additional covers, or specialized tools—installation requires only a hex key and torque wrench. The aluminum alloy body is wrapped in high-dielectric strength plastisol insulation, providing abrasion, chemical, and UV resistance while ensuring a non-combustible design. Each port is pre-loaded with an oxide inhibitor to prevent corrosion and maintain low contact resistance, and removable access plugs allow for flexible entry from either side. The ITO-4 supports a maximum operating temperature of 90°C and is dual-rated for 95A (copper) and 75A (aluminum) at 600V. With a compact footprint measuring 1.12" (L) x 1.18" (W) x 1.38" (H) and a torque rating of 35 in-lbs, this connector is optimized for space-constrained applications. The ergonomic, molded design ensures a comfortable grip during installation, while the transparent plastisol allows for visual confirmation of conductor placement. Compatible with Class B and C conductors, the ITO-4 is part of NSI’s Vision Tap series, offering parallel-rated configurations for versatile use in both line and load sides of electrical systems. Ideal for industrial, commercial, and utility installations where reliability and ease of use are critical.
  • Pre-insulated aluminum alloy body with high-dielectric plastisol insulation
  • Dual-side entry with removable access plugs for flexible installation
  • Dual-rated for copper (95A) and aluminum (75A) conductors at 600V
  • Abrasion, chemical, and UV-resistant; non-combustible design
  • Compact dimensions: 1.12" x 1.18" x 1.38"; torque rating: 35 in-lbs

Specifications

Aluminum Conductor Max AMP
75 Amp
Aluminum Conductor Note
Dual Rated for use with copper and or aluminum cables. Not for use with fine-stranded, flexible cables
Application
Wire Termination
Color
Black
Copper Conductor Max
95 Amp
Environmental Conditions
90 C
Finish
Plastisol Insulated
Material
Aluminum
Number Of Conductors
2
Number Of Poles
1
Size
L=1.120 - W=1.250 - H=1.348 IN
Special Features
(2) 4-14 AWG - Dual Rated - Offset Ports
Standard
UL 486A/B
Temperature Rating
90 C
Type
Multi Cable
Voltage Rating
600 V
Warranty
1 Year
Wire Size
4-14 AWG
Wire Type
Class B & C
Wire/Cable Class
Class B, Class C
Package Dimensions (L x W x H)
1.12 IN x 1.25 IN x 1.38 IN
Package Dimensions (L x W x H)
2.8448 cm x 3.175 cm x 3.5052 cm
Package Weight (Imperial)
0.060 L
Package Weight (Metric)
0.027 kg
The Polaris IPL4-4 Multi-Tap Single Side Entry Connector features 4 ports sized for 4-14 AWG wires. The body is made from aluminum alloy wrapped in a layer of plastisol insulation. Each port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.

IPL4-4

The Polaris IPL4-4 Multi-Tap Single Side Entry Connector features 4 ports sized for 4-14 AWG wires. The body is made from aluminum alloy wrapped in a layer of plastisol insulation. Each port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.
Bi-Metal Pin Connectors with Insulating Cover, 600V, Aluminum Cable Size 8 AWG to Copper Pigtail Wire Size 10 AWG, Tin Plated, Die Code 24, Die Color Code Blue

61905A

Bi-Metal Pin Connectors with Insulating Cover, 600V, Aluminum Cable Size 8 AWG to Copper Pigtail Wire Size 10 AWG, Tin Plated, Die Code 24, Die Color Code Blue
Panduit DV18-250B-3K Female Disconnect

DV18-250B-3K

Panduit DV18-250B-3K Female Disconnect
Rectangular Power Connectors, Housing, Receptacle / Plug, Wire-to-Wire, 1 Position, Wire & Cable, UL 94V-2, Power, Panel Mount

53884-1

Rectangular Power Connectors, Housing, Receptacle / Plug, Wire-to-Wire, 1 Position, Wire & Cable, UL 94V-2, Power, Panel Mount
12-8 AWG Compressor Terminal, .250 X .032, 50 Per Pack

FCT12-250-3

12-8 AWG Compressor Terminal, .250 X .032, 50 Per Pack
The Polaris IPLMD600-5 Multi-Tap Mountable Dual-Sided Entry Connector features 5 ports sized for 600 MCM - 6 AWG wires. Mounting holes on either side of the connector allow for direct mounting to troughs, panels or wireways with 1/4†bolts. The body is made from aluminum alloy wrapped in a layer of plastisol insulation. Each dual-sided port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.

IPLMD600-5

The Polaris IPLMD600-5 Multi-Tap Mountable Dual-Sided Entry Connector features 5 ports sized for 600 MCM - 6 AWG wires. Mounting holes on either side of the connector allow for direct mounting to troughs, panels or wireways with 1/4†bolts. The body is made from aluminum alloy wrapped in a layer of plastisol insulation. Each dual-sided port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.
The Easy-Twist WWC-N1-C 100-Count Carton of N-Type Yellow Wire Connectors are designed for use on copper wires in the 22-10 AWG size range. They’re made of flame-retardant thermoplastic rated for a maximum temperature of 105˚ Celsius (221˚ Fahrenheit). The quick-grip square spring design grips in fewer twists and can dead-end a single wire, while the ergonomic swept-back wing design and ribbed texture makes them easy to twist. Their compact design is useful for applications in tight areas or anywhere else you need to connect wires.

WWC-N1-C

The Easy-Twist WWC-N1-C 100-Count Carton of N-Type Yellow Wire Connectors are designed for use on copper wires in the 22-10 AWG size range. They’re made of flame-retardant thermoplastic rated for a maximum temperature of 105˚ Celsius (221˚ Fahrenheit). The quick-grip square spring design grips in fewer twists and can dead-end a single wire, while the ergonomic swept-back wing design and ribbed texture makes them easy to twist. Their compact design is useful for applications in tight areas or anywhere else you need to connect wires.
The Easy-Twist WWC-GR-D 25,000-Count Bulk Fibre Drum of Green Winged Wire Connectors are designed for grounding copper wires in the 14-12 AWG size range. They have a hole in the top designed for a through-wire and are made of flame-retardant thermoplastic. The quick-grip square spring design grips in fewer twists and can dead-end a single wire, while the ergonomic swept-back wing design and ribbed texture makes them easy to twist. Their compact design is useful for applications in tight areas or anywhere else you need to connect wires.

WWC-GR-D

The Easy-Twist WWC-GR-D 25,000-Count Bulk Fibre Drum of Green Winged Wire Connectors are designed for grounding copper wires in the 14-12 AWG size range. They have a hole in the top designed for a through-wire and are made of flame-retardant thermoplastic. The quick-grip square spring design grips in fewer twists and can dead-end a single wire, while the ergonomic swept-back wing design and ribbed texture makes them easy to twist. Their compact design is useful for applications in tight areas or anywhere else you need to connect wires.

Frequently Asked Questions

What is the maximum voltage rating for the ITO-4?

The ITO-4 is rated for 600V maximum voltage.

Can the ITO-4 be used in cable trays?

Yes, the ITO-4 is designed for installation in cable trays, ducts, raceways, and troughs.

What wire sizes are compatible with the ITO-4?

The ITO-4 supports 4-14 AWG conductors for both copper and aluminum cables.

What is the torque specification for the ITO-4?

The ITO-4 requires a torque of 35 in-lbs for proper installation.

What is the operating temperature range for the ITO-4?

The ITO-4 operates at a maximum temperature of 90°C and is cold-rated to -45°C.

What is the material of the ITO-4 body?

The ITO-4 body is made from aluminum alloy with a plastisol insulation layer.

What tools are required to install the ITO-4?

Installation requires a hex key and torque wrench; no additional tape or covers are needed.

Is the ITO-4 suitable for outdoor use?

Yes, the ITO-4 is UV-resistant and suitable for outdoor installations.

Frequently Asked Questions about NSI Industries

How are Tork products typically installed?

Tork products are typically installed by trained technicians who follow a comprehensive commissioning process. This includes verifying the work environment, conducting electrical installation checks, performing internal and external equipment inspections, powering on the system, and executing operational tests to ensure compatibility and reliability.

What environmental ratings do Tork products have?

Tork products are designed to meet various environmental ratings, including NEMA Type 4X and Type 6, which provide protection against corrosion, windblown dust, rain, and occasional temporary submersion. These ratings ensure that Tork products can withstand harsh industrial environments while maintaining operational integrity.

What communication protocols do Tork products support?

Tork products support a comprehensive range of communication protocols, including PROFIBUS DP V1, PROFINET with dual port, EtherNet/IP with dual port, CANopen, and Modbus RTU integrated as standard. These protocols facilitate flexible network integration and high-performance communication across various industrial automation systems.

What are the key features of Tork products?

Tork products are designed with advanced features that enhance efficiency and reliability in industrial applications. Key features include integrated harmonics and EMC design for improved power quality, removable terminals for quick installation, and USB ports for easy troubleshooting. Additionally, Tork solutions emphasize user-friendly setup with application wizards and memory modules for convenient parameter management.

What are the main product lines offered by Tork?

Tork offers a diverse range of products primarily focused on industrial automation, including TORK® Photocontrols, lighting controls, and various electrical components such as enclosures, occupancy sensors, and grounding solutions. These products are designed to enhance efficiency and reliability in commercial and industrial applications.

What technical support does Tork offer?

Tork offers a comprehensive range of technical support services, including 24/7 customer support, on-site service management, and a technical hotline network. With three advanced technical support centers and over 8,000 hours of technical training conducted annually, Tork ensures certified expertise across 25+ languages to assist customers effectively. Their commitment to service is reflected in a 98% Service Level Agreement compliance rate, providing reliable support for all operational needs.

What industries and applications are Tork products used for?

Tork products are utilized across a variety of industries, including food processing, healthcare, hospitality, and manufacturing. They are designed for applications such as hand hygiene, surface cleaning, and dispensing solutions, ensuring efficiency and compliance in environments that require high standards of cleanliness and safety.

What certifications and standards do Tork products comply with?

Tork products comply with UL and cUL certifications, ensuring they meet rigorous safety and performance standards. Additionally, many models are designed to meet NEMA enclosure ratings, providing protection against environmental factors.

How are Remke products typically installed?

Remke products are typically installed through a systematic process that includes site audits to verify proper wiring, followed by remote or on-site commissioning. This commissioning involves installation verification, programming, and communication testing to ensure the system operates reliably and meets design specifications.

What accessories are available for Remke products?

Remke offers a wide range of accessories for their products, including panel mounting kits, fuse holders for voltage inputs, ferrites for communication modules, and current transformers. These accessories enhance the functionality and protection of Remke's industrial automation solutions, ensuring reliable performance in various applications.