
CompleTech CA930C4 offset pattern collinear - Frequency range: 880-960 MHz - Gain: 11 dBi - Polarization…
Documents & Media
Contact for Pricing
Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.
Overview
- Frequency range: 880-960 MHz
- Gain: 11 dBi with vertical polarization
- Connector: N-female for secure connectivity
- Radome: UV-resistant ABS/FG PU foam, IP67 rated
- Mounting: Compatible with 35-60 mm diameter poles
- Wind load: 100 N for outdoor durability
- Lightning protection: DC-short circuited feed point
- Temperature range: -40°C to +80°C
Specifications
Connection Type | N-female |
Connector | N-female |
Frequency | 880-960 MHz |
Gain | 11 dBi |
Length | 1136 mm |
Material | ABS/FG PU foam, copper |
Mounting Diameter | Ø 35-60 |
Mounting Type | 35-60 mm diameter pole |
Polarization | vertical |
Radiator Material | copper |
Radome | ABS/FG, PU foam |
Series | CA930C4 |
VSWR | <1.5 |
Weight | 3125 g |
Wind Load | 100 N @ 150 km/h |

CA160C4
offset pattern collinear - Frequency range: 154-166 MHz - Gain: 11 dBi - Polarization: vertical - Connector: N-/TNC-female - VSWR: <1.5 - Radome: ABS/FG PU foam - Radiator material: copper - Mounting: 35-60 mm diameter pole - Wind load: 228 N
CA140F2+
directional end fire yagi array - Frequency range: 135-145 MHz - Gain: 7 dBi - Polarization: vertical/horizontal - Connector: N-/TNC-female - VSWR: <1.5 - Radome: ABS/FG PU foam - Radiator material: copper - Mounting: 35-60 mm diameter pole - Wind load: 342 N
CA420B4
bidirectional stacked broadside - Frequency range: 405-440 MHz - Gain: 9 dBi - Polarization: vertical - Connector: N-/TNC-female - VSWR: <1.5 - Radome: ABS/FG PU foam - Radiator material: copper - Mounting: 35-60 mm diameter pole - Wind load: 132 N
CA140S2
directional stacked yagi array - Frequency range: 135-145 MHz - Gain: 9 dBi - Polarization: vertical/horizontal - Connector: N-/TNC-female - VSWR: <1.5 - Radome: ABS/FG PU foam - Radiator material: copper - Mounting: 35-60 mm diameter pole - Wind load: 168 N
CA350C4
offset pattern collinear - Frequency range: 336-364 MHz - Gain: 11 dBi - Polarization: vertical - Connector: N-/TNC-female - VSWR: <1.5 - Radome: ABS/FG PU foam - Radiator material: copper - Mounting: 35-60 mm diameter pole - Wind load: 144 N
CA450C3
offset pattern collinear - Frequency range: 440-475 MHz - Gain: 10 dBi - Polarization: vertical - Connector: N-/TNC-female - VSWR: <1.5 - Radome: ABS/FG PU foam - Radiator material: copper - Mounting: 35-60 mm diameter pole - Wind load: 96 NFrequently Asked Questions
What is the operating temperature range for the CA930C4 antenna?
The antenna can operate in temperatures ranging from -40ºC to +80ºC.
What is the impedance of the CA930C4 antenna?
The impedance of the CA930C4 antenna is 50 ohm.
What is the gain of the CA930C4 antenna?
The CA930C4 antenna has a gain of 11 dBi.
What type of connector does the CA930C4 antenna use?
The CA930C4 antenna features N-female/TNC-female connectors.
What is the VSWR rating for the CA930C4 antenna?
The VSWR for the CA930C4 antenna is less than 1.5.
What is the IP rating of the CA930C4 antenna?
The CA930C4 antenna has an IP rating of 67.
How is lightning protection provided for the CA930C4 antenna?
The CA930C4 antenna is DC-short circuited for lightning protection.
What is the polarization of the CA930C4 antenna?
The CA930C4 antenna has vertical polarization.
What are the beamwidths (H and E) of the CA930C4 antenna?
The H -3 dB beamwidth is 182º and the E -3 dB beamwidth is 13º.
What materials are used for the radome and radiator of the CA930C4 antenna?
The radome is made of UV resistant ABS/FG with PU foam filling, and the radiator is made of copper.
How to Install the CA930C4 Controller
This guide provides step-by-step instructions for the installation and initial setup of the CA930C4 Controller.
Estimated time: 45m
Tools needed:
Screwdriver, Wire strippers, Multimeter
Supplies needed:
Mounting screws, Self-amalgamating tape, Terminal connectors
- Mount the controller
Secure the CA930C4 controller to the designated mounting surface using the provided mounting screws. Ensure the controller is level and firmly attached.
- Connect the wiring
Strip the ends of the wires and connect them to the appropriate terminals on the CA930C4 controller. Use terminal connectors to ensure a secure connection.
- Seal the connections
Cover all connectors and cable junctions with self-amalgamating tape to provide proper weather protection and prevent moisture ingress.
- Verify the installation
Use a multimeter to check the voltage and continuity of the connections to ensure they are functioning correctly.
- Initial setup
Power on the CA930C4 controller and follow the manufacturer's instructions for initial configuration settings.

