
Contact for Pricing
Overview
- Offset pattern collinear design for focused signal.
- Frequency range: 336-364 MHz.
- High gain of 11 dBi for extended range.
- Vertical polarization for optimal signal orientation.
- Durable ABS/FG radome with PU foam filling and IP67 rating.
Specifications
Connector | N-/TNC-female |
Frequency | 336-364 MHz |
Gain | 11 dBi |
Length | 2990 mm |
Mounting Diameter | Ø 35-60 |
Polarization | vertical |
Radiator Material | copper |
Radome | ABS/FG, PU foam |
VSWR | <1.5 |
Weight | 3670 g |
Wind Load | 144 N @ 150 km/h |

CA860C4
offset pattern collinear - Frequency range: 830-890 MHz - Gain: 11 dBi - Polarization: vertical - Connector: N-female - VSWR: <1.5 - Radome: ABS/FG PU foam - Radiator material: copper - Mounting: 35-60 mm diameter pole - Wind load: 100 NHow to Install the CA350C4 Controller
This guide provides step-by-step instructions for installing and configuring the CA350C4 Controller, ensuring proper wiring and setup for optimal performance.
Estimated time: 45m
Tools needed:
Screwdriver, Wire strippers, Multimeter
Supplies needed:
Mounting screws, Self-amalgamating tape, Terminal connectors
- Mount the controller
Secure the CA350C4 Controller to the designated mounting surface using the provided mounting screws. Ensure it is level and firmly attached.
- Connect the wiring
Use terminal connectors to connect the wiring from the power supply to the controller. Ensure all connections are tight and secure.
- Seal the connections
Cover all connectors and cable junctions with self-amalgamating tape to provide weather protection and prevent moisture ingress.
- Verify the installation
Use a multimeter to check the voltage at the controller to ensure proper power supply. Confirm that all connections are functioning correctly.

