
CompleTech CA140C2 offset pattern collinear - Frequency range: 135-145 MHz - Gain: 8 dBi - Polarization…
Documents & Media
Contact for Pricing
Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.
Overview
- Frequency Range: 135-145 MHz
- Gain: 8 dBi
- Polarization: Vertical
- Connector: N-female / TNC-female
- VSWR: <1.5
- Radome: UV resistant ABS/FG with PU foam filling
- Radiator Material: Copper
- Mounting: Ø 35-60 mm pole
- IP Rating: 67
- Temperature Range: -40ºC to +80ºC
Specifications
Connector | N-/TNC-female |
Frequency | 135-145 MHz |
Gain | 8 dBi |
Length | 3180 mm |
Mounting Diameter | Ø 35-60 |
Polarization | vertical |
Radiator Material | copper |
Radome | FG, PU foam |
VSWR | <1.5 |
Weight | 2260 g |
Wind Load | 126 N @ 150 km/h |

CA930C2
offset pattern collinear - Frequency range: 880-960 MHz - Gain: 8 dBi - Polarization: vertical - Connector: N-female - VSWR: <1.5 - Radome: ABS/FG PU foam - Radiator material: copper - Mounting: 35-60 mm diameter pole - Wind load: 50 N
CA860B2
bidirectional broadside - Frequency range: 830-890 MHz - Gain: 6 dBi - Polarization: vertical - Connector: N-female - VSWR: <1.5 - Radome: ABS/FG PU foam - Radiator material: copper - Mounting: 35-60 mm diameter pole - Wind load: 50 N
CA230B2
bidirectional broadside - Frequency range: 221-239 MHz - Gain: 6 dBi - Polarization: vertical - Connector: N-/TNC-female - VSWR: <1.5 - Radome: ABS/FG PU foam - Radiator material: copper - Mounting: 35-60 mm diameter pole - Wind load: 90 N
CA380C4
offset pattern collinear - Frequency range: 365-395 MHz - Gain: 11 dBi - Polarization: vertical - Connector: N-/TNC-female - VSWR: <1.5 - Radome: ABS/FG PU foam - Radiator material: copper - Mounting: 35-60 mm diameter pole - Wind load: 140 N
CA85D
offset pattern dipole - Frequency range: 83-88 MHz - Gain: 5 dBi - Polarization: vertical/horizontal - Connector: N-/ TNC-/ 7/16-female - VSWR: <1.5 - Radome: ABS/FG PU foam - Radiator material: copper - Mounting: 35-60 mm diameter pole - Wind load: 84 N
CA170C3
offset pattern collinear - Frequency range: 163-177 MHz - Gain: 10 dBi - Polarization: vertical - Connector: N-/TNC-female - VSWR: <1.5 - Radome: ABS/FG PU foam - Radiator material: copper - Mounting: 35-60 mm diameter pole - Wind load: 165 NFrequently Asked Questions
What is the polarization of the CA140C2 antenna?
The polarization of the antenna is vertical.
What is the operating temperature range for the CA140C2 antenna?
The antenna can operate in temperatures ranging from -40ºC to +80ºC.
What is the impedance of the CA140C2 antenna?
The impedance of the antenna is 50 ohm.
What is the gain of the CA140C2 antenna?
The gain of the antenna is 8 dBi.
What is the VSWR rating for the CA140C2 antenna?
The VSWR rating for the antenna is less than 1.5.
What type of connector does the CA140C2 antenna use?
The antenna uses N-female or TNC-female connectors.
What is the IP rating of the CA140C2 antenna?
The antenna has an IP rating of 67.
How is the CA140C2 antenna protected against lightning?
The antenna is DC-short circuited for lightning protection.
What materials are used for the CA140C2 antenna's radome and radiator?
The radome is made of UV resistant ABS/FG with PU foam filling, and the radiator is made of copper.
What is the beamwidth (E -3 dB) of the CA140C2 antenna?
The E -3 dB beamwidth of the antenna is 27 degrees.
How to Install the CA140C2 Controller
This guide provides step-by-step instructions for installing and configuring the CA140C2 Controller, ensuring proper wiring and calibration.
Estimated time: 45m
Tools needed:
Screwdriver, Wire strippers, Multimeter
Supplies needed:
Mounting screws, Terminal connectors, Self-amalgamating tape
- Mount the controller
Secure the CA140C2 controller to the designated mounting surface using the provided mounting screws. Ensure it is level and firmly attached.
- Connect the wiring
Use terminal connectors to connect the power and signal wires to the appropriate terminals on the CA140C2 controller. Ensure all connections are tight and secure.
- Seal the connections
Cover all connectors and cable junctions with self-amalgamating tape to provide proper weather protection. Ensure there are no exposed wires.
- Verify the installation
Use a multimeter to check the voltage at the controller terminals to ensure proper power supply. Confirm that all connections are functioning as expected.
- Calibrate the controller
Follow the manufacturer's instructions to calibrate the CA140C2 controller settings according to your specific application requirements.

