
CompleTech CA340C3 offset pattern collinear - Frequency range: 326-353 MHz - Gain: 10 dBi - Polarization…
Documents & Media
Contact for Pricing
Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.
Overview
- Frequency Range: 326-353 MHz
- Gain: 10 dBi
- Polarization: Vertical
- Connector: N-/TNC-female
- VSWR: <1.5
- Radome: UV resistant ABS/FG with PU foam filling
- Radiator Material: Copper
- Mounting: 35-60 mm diameter pole
- IP Rating: 67
- Operating Temperature: -40ºC to +80ºC
Specifications
Connector | N-/TNC-female |
Frequency | 326-353 MHz |
Gain | 10 dBi |
Length | 2205 mm |
Mounting Diameter | Ø 35-60 |
Polarization | vertical |
Radiator Material | copper |
Radome | ABS/FG, PU foam |
VSWR | <1.5 |
Weight | 2680 g |
Wind Load | 108 N @ 150 km/h |

CA860C3
offset pattern collinear - Frequency range: 830-890 MHz - Gain: 10 dBi - Polarization: vertical - Connector: N-female - VSWR: <1.5 - Radome: ABS/FG PU foam - Radiator material: copper - Mounting: 35-60 mm diameter pole - Wind load: 75 N
CA420B2
bidirectional broadside - Frequency range: 405-440 MHz - Gain: 6 dBi - Polarization: vertical - Connector: N-/TNC-female - VSWR: <1.5 - Radome: ABS/FG PU foam - Radiator material: copper - Mounting: 35-60 mm diameter pole - Wind load: 66 N
CA450C4
offset pattern collinear - Frequency range: 440-475 MHz - Gain: 11 dBi - Polarization: vertical - Connector: N-/TNC-female - VSWR: <1.5 - Radome: ABS/FG PU foam - Radiator material: copper - Mounting: 35-60 mm diameter pole - Wind load: 128 N
CA420C4
offset pattern collinear - Frequency range: 405-440 MHz - Gain: 11 dBi - Polarization: vertical - Connector: N-/TNC-female - VSWR: <1.5 - Radome: ABS/FG PU foam - Radiator material: copper - Mounting: 35-60 mm diameter pole - Wind load: 132 N
CA340B4
bidirectional stacked broadside - Frequency range: 326-353 MHz - Gain: 9 dBi - Polarization: vertical - Connector: N-/TNC-female - VSWR: <1.5 - Radome: ABS/FG PU foam - Radiator material: copper - Mounting: 35-60 mm diameter pole - Wind load: 144 N
CA350C3
offset pattern collinear - Frequency range: 336-364 MHz - Gain: 10 dBi - Polarization: vertical - Connector: N-/TNC-female - VSWR: <1.5 - Radome: ABS/FG PU foam - Radiator material: copper - Mounting: 35-60 mm diameter pole - Wind load: 108 NFrequently Asked Questions
What is the operating temperature range for the CA340C3 antenna?
The CA340C3 antenna can operate in a temperature range of -40 exto{C} to +80 exto{C}.
What is the impedance of the CA340C3 antenna?
The impedance of the CA340C3 antenna is 50 ohm.
What is the gain of the CA340C3 antenna?
The gain of the CA340C3 antenna is 10 dBi.
What type of connector does the CA340C3 antenna use?
The CA340C3 antenna uses either an N-female or TNC-female connector.
What is the VSWR rating for the CA340C3 antenna?
The VSWR rating for the CA340C3 antenna is less than 1.5.
What is the IP rating of the CA340C3 antenna?
The CA340C3 antenna has an IP rating of 67.
How is the CA340C3 antenna protected against lightning?
The CA340C3 antenna is protected against lightning by being DC-short circuited.
What material is the radiator of the CA340C3 antenna made from?
The radiator of the CA340C3 antenna is made of copper.
What is the beamwidth of the CA340C3 antenna in the E-plane?
The E-plane -3 dB beamwidth for the CA340C3 antenna is 20 degrees.
What is the beamwidth of the CA340C3 antenna in the H-plane?
The H-plane -3 dB beamwidth for the CA340C3 antenna is 179 degrees.
How to Install the CA340C3 Controller
This guide provides step-by-step instructions for the installation and initial setup of the CA340C3 Controller, ensuring proper wiring and configuration.
Estimated time: 45m
Tools needed:
Screwdriver, Wire strippers, Multimeter
Supplies needed:
Mounting screws, Self-amalgamating tape, Terminal connectors
- Mount the controller
Secure the CA340C3 controller to the designated mounting surface using the provided mounting screws. Ensure the controller is level and firmly attached.
- Connect the wiring
Use wire strippers to prepare the ends of the wires. Connect the wires to the appropriate terminals on the CA340C3 controller, ensuring a secure fit.
- Seal the connections
Cover all connectors and cable junctions with self-amalgamating tape to provide weather protection. Ensure that the tape is applied securely to prevent moisture ingress.
- Verify the connections
Use a multimeter to check the continuity of the connections. Ensure that all connections are secure and functioning correctly before proceeding.
- Configure the controller
Follow the manufacturer's instructions to program the CA340C3 controller settings according to your specific application requirements.
- Calibrate the controller
Perform any necessary calibration procedures as outlined in the user manual to ensure optimal performance of the CA340C3 controller.

