
Contact for Pricing
Overview
- Frequency Range: 336-364 MHz
- Gain: 5 dBi
- Polarization: Vertical/Horizontal
- Connector Options: N-, TNC-, 7/16-female
- Durability: UV-resistant ABS/FG radome, IP67 rated
Specifications
Connection Type | N-/TNC-/7/16-female |
Connector | N-/TNC-/7/16-female |
Frequency | 336-364 MHz |
Gain | 5 dBi |
Length | 310 mm |
Material | ABS/FG PU foam, copper |
Mounting Diameter | Ø 35-60 |
Mounting Type | 35-60 mm diameter pole |
Polarization | vertical/horizontal |
Radiator Material | copper |
Radome | ABS/FG, PU foam |
Series | CA350D |
VSWR | <1.5 |
Weight | 700 g |
Wind Load | 36 N @ 150 km/h |

CA420D
offset pattern dipole - Frequency range: 405-440 MHz - Gain: 5 dBi - Polarization: vertical/horizontal - Connector: N-/ TNC-/ 7/16-female - VSWR: <1.5 - Radome: ABS/FG PU foam - Radiator material: copper - Mounting: 35-60 mm diameter pole - Wind load: 33 NHow to Install the CA350D Controller
This guide provides step-by-step instructions for installing and configuring the CA350D Controller, ensuring proper wiring and calibration.
Estimated time: 1h
Tools needed:
Screwdriver, Wire strippers, Multimeter
Supplies needed:
Mounting screws, Wire connectors, Self-amalgamating tape
- Mount the controller
Secure the CA350D Controller to the designated mounting surface using the provided mounting screws. Ensure it is level and firmly attached.
- Connect the wiring
Strip the ends of the wires and connect them to the appropriate terminals on the CA350D Controller. Use wire connectors to secure the connections.
- Seal the connections
Cover all connectors and cable junctions with self-amalgamating tape to ensure proper weather protection and prevent moisture ingress.
- Power on the controller
Turn on the power supply to the CA350D Controller and verify that it powers up correctly using a multimeter.
- Configure the settings
Access the configuration menu on the CA350D Controller and set the desired parameters according to your application requirements.
- Calibrate the controller
Follow the calibration procedure outlined in the manual to ensure the CA350D Controller operates accurately within specified parameters.

