Authorized ABB Distributor (Installation Products)
ABB - Installation Products XJG38-EMT - 1 Inch XJG Conduit Expansion Coupling with Internal Bonding Jumper, 8 Inch Movement for Use with EMT Conduit

ABB Installation Products XJG38-EMT 1 Inch XJG Conduit Expansion Coupling with Internal Bonding Jumper, 8 Inch Movement for…

UPC: 786209869159


Documents & Media
Installation InstructionsSpecification SheetManufacturer Product Website

Contact for Pricing

Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.

Overview

The ABB XJG Conduit Expansion Coupling (SKU: XJG38-EMT) is a 1-inch EMT conduit fitting engineered to accommodate up to 8 inches of axial movement in rigid or intermediate metal conduit systems. Designed for long conduit runs subject to thermal expansion, contraction, or structural shifts—such as seismic activity or temperature fluctuations—this coupling maintains electrical continuity without external grounding straps. Its internal bonding jumper, constructed of tinned copper braid, meets UL fault current test requirements per NEC® Article 250.98, eliminating the need for separate bonding whips and simplifying installation. The coupling features a zinc-plated steel body with exterior and interior zinc plating for corrosion resistance, and a keyed internal sliding bushing for alignment. Installation requires no disassembly: slide the fitting onto the conduit until it stops at the internal bushing, then tighten the gland nut. The XJG series is ideal for industrial and commercial applications where conduit pathways must adapt to movement while preserving grounding integrity. Key specifications include a ductile iron body (available with PVC coating), tinned copper braid internal bonding jumper, and PTFE/synthetic fiber packing. The product is UL Listed for use with aluminum EMT and complies with NEC® 250.98. Note: XJG EMT Couplings are not raintight and are for use in dry locations only.
  • Accommodates up to 8 inches of axial movement in conduit systems
  • Internal tinned copper braid bonding jumper meets NEC® 250.98 requirements
  • Zinc-plated steel body with corrosion-resistant finish
  • No disassembly required for installation; slide-on design with gland nut tightening
  • UL Listed for use with aluminum EMT; suitable for dry locations only

Specifications

Application
Fittings are Designed to Couple Pieces of Conduit Together that are Subject to Longitudinal Movement
Finish
Zinc Plate
Material Quality
Ductile Iron
Size
1 Inch
Special Features
No Disassembly Necessary to Install. Fast, Simple, and Requires Fewer Steps
Standard
UL E23018, CSA
Type
EMT Conduit Fittings
Package Dimensions (L x W x H)
0.01 IN x 0.01 IN x 0.01 IN
Package Dimensions (L x W x H)
0.0254 cm x 0.0254 cm x 0.0254 cm
Package Weight (Imperial)
9.3900 L
Package Weight (Metric)
4.2590 kg
The Polaris IT-4 Multi-Tap Single-Side Entry Connector features 2 ports sized for 4 AWG to 14 AWG wires. The body is made from aluminum alloy wrapped in a layer of plastisol insulation. Each port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Dual rated for use with copper or aluminum cables. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.

IT-4

The Polaris IT-4 Multi-Tap Single-Side Entry Connector features 2 ports sized for 4 AWG to 14 AWG wires. The body is made from aluminum alloy wrapped in a layer of plastisol insulation. Each port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Dual rated for use with copper or aluminum cables. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.
Set Screw Connector, Concrete Tight, Conduit Size 3/4 Inch, Material Zinc Plated Steel, Color Red, For Fire Alarm Applications

TC122A-FA

Set Screw Connector, Concrete Tight, Conduit Size 3/4 Inch, Material Zinc Plated Steel, Color Red, For Fire Alarm Applications
3/4 Inch XJG Conduit Expansion Coupling with Internal Bonding Jumper, 8 Inch Movement for Use with EMT Conduit

XJG28-EMT

3/4 Inch XJG Conduit Expansion Coupling with Internal Bonding Jumper, 8 Inch Movement for Use with EMT Conduit
3/4 Inch XJG Conduit Expansion Coupling with Internal Bonding Jumper, 4 Inch Movement for Use with EMT Conduit

XJG24-EMT

3/4 Inch XJG Conduit Expansion Coupling with Internal Bonding Jumper, 4 Inch Movement for Use with EMT Conduit
1 Inch XJG Conduit Expansion Coupling with Internal Bonding Jumper, 4 Inch Movement for Use with EMT Conduit

XJG34-EMT

1 Inch XJG Conduit Expansion Coupling with Internal Bonding Jumper, 4 Inch Movement for Use with EMT Conduit
1-1/2 Inch XJG Conduit Expansion Coupling with Internal Bonding Jumper, 4 Inch Movement for Use with EMT Conduit

XJG54-EMT

1-1/2 Inch XJG Conduit Expansion Coupling with Internal Bonding Jumper, 4 Inch Movement for Use with EMT Conduit
1-1/4 Inch XJG Conduit Expansion Coupling with Internal Bonding Jumper, 8 Inch Movement for Use with EMT Conduit

XJG48-EMT

1-1/4 Inch XJG Conduit Expansion Coupling with Internal Bonding Jumper, 8 Inch Movement for Use with EMT Conduit
1-1/2 Inch XJG Conduit Expansion Coupling with Internal Bonding Jumper, 8 Inch Movement for Use with EMT Conduit

XJG58-EMT

1-1/2 Inch XJG Conduit Expansion Coupling with Internal Bonding Jumper, 8 Inch Movement for Use with EMT Conduit

How to Install XJG-EMT Expansion Joints

This guide provides step-by-step instructions for installing XJG-EMT Expansion Joints with Electrical Metallic Tubing, ensuring proper connection and functionality for thermal expansion and contraction.

Estimated time: 15m

Tools needed:

Pipe wrench

Supplies needed:

Electrical Metallic Tubing (EMT)

  1. Insert EMT Tubing

    Insert the Electrical Metallic Tubing (EMT) into each end of the pre-assembled XJG-EMT Expansion Joint. The gland nut is partially tightened from the factory to facilitate easy insertion of the tubing.

  2. Tighten Gland Nuts

    Using a pipe wrench, tighten the gland nut at each end of the EMT connector. Refer to the provided Torque Chart for the correct torque specifications to ensure a rain-tight seal by compressing the Teflon packing around the tubing.

  3. Position Internal Bushing

    Position the internal bushing in the middle of the expansion joint fitting (XJG-EMT) to allow for equal longitudinal movement of the conduit in both directions.

Frequently Asked Questions about ABB - Installation Products

How are Thomas and Betts products typically installed?

Thomas and Betts products are installed using a variety of methods tailored to specific applications, including the use of flexible cords and cable fittings, non-metallic cable glands, and armored cable fittings. Proper selection of fittings is crucial to match the cable type and installation environment, ensuring durability and preventing physical damage. Tools such as the Blackburn® Comfort Crimp® and HEX-FLEX® systems enhance installation efficiency and reliability, reducing labor time and ensuring secure connections.

What accessories are available for Thomas and Betts products?

Thomas and Betts offers a comprehensive range of accessories for their products, including various cord and cable fittings, non-metallic cable glands, service entrance cable fittings, and armored cable fittings. Their accessories are designed to enhance installation efficiency and ensure compatibility with different cable types and environmental conditions, providing reliable connections for a wide array of applications.

What environmental ratings do Thomas and Betts products have?

Thomas and Betts products feature robust environmental ratings, including NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications, as well as IEC 60529 IP66 protection. These ratings ensure that their products are designed to withstand harsh industrial environments, with capabilities to resist dust, water, and corrosion, and operate effectively in a wide temperature range.

What communication protocols do Thomas and Betts products support?

Thomas and Betts products support a wide range of industrial communication protocols, including Ethernet, DeviceNet, PROFIBUS, Modbus, CANopen, and others. This extensive compatibility ensures seamless integration and reliable communication across various industrial automation systems, catering to diverse application needs.

What are the key features of Thomas and Betts products?

Thomas and Betts products are known for their innovative designs, high performance, and compliance with industry standards such as the National Electrical Code and Underwriters' Laboratories. They offer a comprehensive range of rugged and reliable electrical fittings, including liquidtight and dust-tight connections, which enhance installation efficiency and reduce overall project costs. Their products are engineered for durability in harsh environments, ensuring long-term reliability and lower installed costs.

What are the main product lines offered by Thomas and Betts?

Thomas and Betts offers a comprehensive range of product lines including electrical connectors, cable management systems, grounding and bonding solutions, and industrial automation components. Their products are designed for durability and reliability in demanding industrial environments, ensuring optimal performance and safety across various applications.

What technical support does Thomas and Betts offer?

Thomas and Betts offers comprehensive technical support, including access to field application engineers for onsite training and installation assistance. Their technical support staff is available to address inquiries related to product specifications and installation practices, ensuring optimal performance and safety of electrical systems. Additionally, they provide a variety of training programs to enhance the knowledge and skills of users in the field.

What industries and applications are Thomas and Betts products used for?

Thomas and Betts products are utilized across various industries including electrical construction, industrial automation, telecommunications, and utilities. Their extensive range of cord and cable fittings, electrical boxes, and metal framing systems are designed for applications that require durability and reliability in harsh environments, ensuring optimal performance in both permanent and temporary installations.

What certifications and standards do Thomas and Betts products comply with?

Thomas and Betts products comply with critical international certifications including UL (Underwriters Laboratories), CSA (Canadian Standards Association), and CE (European Community). Our products are designed to meet rigorous industrial standards such as NEMA enclosure ratings and IEC 60529 IP ratings, ensuring safety and reliability across various industrial applications.

What are the main product lines offered by Ocal?

Ocal offers a comprehensive range of corrosion-resistant conduit systems, including PVC-coated conduit and fittings, conduit bodies, hazardous location fittings, and strut accessories. Their products are designed to provide superior corrosion protection, featuring a hot-dipped galvanizing process and UL listed Type 4X PVC-coated conduit bodies, ensuring durability in the most demanding environments.