Authorized ABB Distributor (Installation Products)
ABB - Installation Products XJG28-EMT - 3/4 Inch XJG Conduit Expansion Coupling with Internal Bonding Jumper, 8 Inch Movement for Use with EMT Conduit

ABB Installation Products XJG28-EMT 3/4 Inch XJG Conduit Expansion Coupling with Internal Bonding Jumper, 8 Inch Movement…

UPC: 786209869135

Documents & Media
Installation InstructionsSpecification SheetManufacturer Product Website

Contact for Pricing

Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.

Overview

The ABB Installation Products XJG28-EMT is a 3/4 inch conduit expansion coupling designed for use with EMT (Electrical Metallic Tubing) conduit. This coupling provides 8 inches of axial movement, accommodating thermal expansion and contraction in long conduit runs, thereby preventing stress on the conduit system and connected equipment. It features an integrated internal bonding jumper, ensuring continuous electrical continuity across the expansion joint. This is crucial for maintaining grounding and fault current paths, a requirement for safe and compliant electrical installations. The XJG28-EMT is manufactured by ABB, a recognized name in electrical infrastructure. Its primary function is to absorb movement, making it suitable for applications where significant temperature fluctuations occur, such as industrial facilities, large commercial buildings, and outdoor installations. The 3/4 inch size is standard for many electrical wiring applications. The internal bonding jumper simplifies installation by eliminating the need for separate bonding conductors across the coupling. This product is essential for maintaining the integrity and safety of electrical systems subject to environmental changes. SKU: XJG28-EMT. UNSPSC Code: 39121434.
  • 3/4 Inch EMT Conduit Compatibility
  • 8 Inches of Axial Movement Capability
  • Integrated Internal Bonding Jumper
  • Ensures Continuous Electrical Continuity
  • Manufactured by ABB Installation Products

Specifications

Application
Fittings are Designed to Couple Pieces of Conduit Together that are Subject to Longitudinal Movement
Finish
Zinc Plate
Material Quality
Ductile Iron
Size
3/4 Inch
Special Features
No Disassembly Necessary to Install. Fast, Simple, and Requires Fewer Steps
Standard
UL E23018, CSA
Type
EMT Conduit Fittings
Package Dimensions (L x W x H)
0.01 IN x 0.01 IN x 0.01 IN
Package Dimensions (L x W x H)
0.0254 cm x 0.0254 cm x 0.0254 cm
Package Weight (Imperial)
8.0000 L
Package Weight (Metric)
3.6290 kg
The Polaris IT-4 Multi-Tap Single-Side Entry Connector features 2 ports sized for 4 AWG to 14 AWG wires. The body is made from aluminum alloy wrapped in a layer of plastisol insulation. Each port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Dual rated for use with copper or aluminum cables. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.

IT-4

The Polaris IT-4 Multi-Tap Single-Side Entry Connector features 2 ports sized for 4 AWG to 14 AWG wires. The body is made from aluminum alloy wrapped in a layer of plastisol insulation. Each port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Dual rated for use with copper or aluminum cables. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.
Set Screw Connector, Concrete Tight, Conduit Size 3/4 Inch, Material Zinc Plated Steel, Color Red, For Fire Alarm Applications

TC122A-FA

Set Screw Connector, Concrete Tight, Conduit Size 3/4 Inch, Material Zinc Plated Steel, Color Red, For Fire Alarm Applications
Conduit connection plate with hardware for 3/4 in. electrical metallic tubing (EMT) connectors. The sheet identifies the product as CPC75EG. No material, finish, or dimensional attributes are printed on the sheet beyond the 3/4 size reference in the title.

CPC75EG

Conduit connection plate with hardware for 3/4 in. electrical metallic tubing (EMT) connectors. The sheet identifies the product as CPC75EG. No material, finish, or dimensional attributes are printed on the sheet beyond the 3/4 size reference in the title.
3/4 Inch XJG Conduit Expansion Coupling with Internal Bonding Jumper, 4 Inch Movement for Use with EMT Conduit

XJG24-EMT

3/4 Inch XJG Conduit Expansion Coupling with Internal Bonding Jumper, 4 Inch Movement for Use with EMT Conduit
1 Inch XJG Conduit Expansion Coupling with Internal Bonding Jumper, 4 Inch Movement for Use with EMT Conduit

XJG34-EMT

1 Inch XJG Conduit Expansion Coupling with Internal Bonding Jumper, 4 Inch Movement for Use with EMT Conduit
1-1/2 Inch XJG Conduit Expansion Coupling with Internal Bonding Jumper, 4 Inch Movement for Use with EMT Conduit

XJG54-EMT

1-1/2 Inch XJG Conduit Expansion Coupling with Internal Bonding Jumper, 4 Inch Movement for Use with EMT Conduit
1-1/4 Inch XJG Conduit Expansion Coupling with Internal Bonding Jumper, 8 Inch Movement for Use with EMT Conduit

XJG48-EMT

1-1/4 Inch XJG Conduit Expansion Coupling with Internal Bonding Jumper, 8 Inch Movement for Use with EMT Conduit
1-1/2 Inch XJG Conduit Expansion Coupling with Internal Bonding Jumper, 8 Inch Movement for Use with EMT Conduit

XJG58-EMT

1-1/2 Inch XJG Conduit Expansion Coupling with Internal Bonding Jumper, 8 Inch Movement for Use with EMT Conduit

How to Install the XJG-EMT Expansion Joint

This guide provides step-by-step instructions for installing the XJG-EMT Expansion Joint with Electrical Metallic Tubing (EMT), ensuring proper connection and allowance for thermal movement.

Estimated time: 15m

Tools needed:

Pipe wrench

Supplies needed:

Electrical Metallic Tubing (EMT)

  1. Insert Electrical Metallic Tubing (EMT)

    Ensure the gland nuts on the XJG-EMT Expansion Joint are partially tightened as received from the factory. Insert the Electrical Metallic Tubing (EMT) into each end of the expansion joint until it is fully seated.

  2. Secure Gland Nuts

    Using a pipe wrench, tighten the gland nut at each end of the EMT connector. Refer to the Torque Chart (e.g., 90.4 N•m for 3/4" and smaller, 113 N•m for 1" to 1-1/2", 181 N•m for 2" and larger) to achieve the correct torque, ensuring a rain-tight seal by compressing the Teflon packing around the tubing.

  3. Adjust for Movement

    Position the internal bushing in the middle of the expansion joint fitting. This allows for equal longitudinal movement (2 or 4 inches in either direction, depending on the specific XJG-EMT model) to accommodate thermal expansion and contraction of the conduit.

Frequently Asked Questions about ABB - Installation Products

How are Thomas and Betts products typically installed?

Thomas and Betts products are installed using a variety of methods tailored to specific applications, including the use of flexible cords and cable fittings, non-metallic cable glands, and armored cable fittings. Proper selection of fittings is crucial to match the cable type and installation environment, ensuring durability and preventing physical damage. Tools such as the Blackburn® Comfort Crimp® and HEX-FLEX® systems enhance installation efficiency and reliability, reducing labor time and ensuring secure connections.

What accessories are available for Thomas and Betts products?

Thomas and Betts offers a comprehensive range of accessories for their products, including various cord and cable fittings, non-metallic cable glands, service entrance cable fittings, and armored cable fittings. Their accessories are designed to enhance installation efficiency and ensure compatibility with different cable types and environmental conditions, providing reliable connections for a wide array of applications.

What environmental ratings do Thomas and Betts products have?

Thomas and Betts products feature robust environmental ratings, including NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications, as well as IEC 60529 IP66 protection. These ratings ensure that their products are designed to withstand harsh industrial environments, with capabilities to resist dust, water, and corrosion, and operate effectively in a wide temperature range.

What communication protocols do Thomas and Betts products support?

Thomas and Betts products support a wide range of industrial communication protocols, including Ethernet, DeviceNet, PROFIBUS, Modbus, CANopen, and others. This extensive compatibility ensures seamless integration and reliable communication across various industrial automation systems, catering to diverse application needs.

What are the key features of Thomas and Betts products?

Thomas and Betts products are known for their innovative designs, high performance, and compliance with industry standards such as the National Electrical Code and Underwriters' Laboratories. They offer a comprehensive range of rugged and reliable electrical fittings, including liquidtight and dust-tight connections, which enhance installation efficiency and reduce overall project costs. Their products are engineered for durability in harsh environments, ensuring long-term reliability and lower installed costs.

What are the main product lines offered by Thomas and Betts?

Thomas and Betts offers a comprehensive range of product lines including electrical connectors, cable management systems, grounding and bonding solutions, and industrial automation components. Their products are designed for durability and reliability in demanding industrial environments, ensuring optimal performance and safety across various applications.

What technical support does Thomas and Betts offer?

Thomas and Betts offers comprehensive technical support, including access to field application engineers for onsite training and installation assistance. Their technical support staff is available to address inquiries related to product specifications and installation practices, ensuring optimal performance and safety of electrical systems. Additionally, they provide a variety of training programs to enhance the knowledge and skills of users in the field.

What industries and applications are Thomas and Betts products used for?

Thomas and Betts products are utilized across various industries including electrical construction, industrial automation, telecommunications, and utilities. Their extensive range of cord and cable fittings, electrical boxes, and metal framing systems are designed for applications that require durability and reliability in harsh environments, ensuring optimal performance in both permanent and temporary installations.

What certifications and standards do Thomas and Betts products comply with?

Thomas and Betts products comply with critical international certifications including UL (Underwriters Laboratories), CSA (Canadian Standards Association), and CE (European Community). Our products are designed to meet rigorous industrial standards such as NEMA enclosure ratings and IEC 60529 IP ratings, ensuring safety and reliability across various industrial applications.

What are the main product lines offered by Ocal?

Ocal offers a comprehensive range of corrosion-resistant conduit systems, including PVC-coated conduit and fittings, conduit bodies, hazardous location fittings, and strut accessories. Their products are designed to provide superior corrosion protection, featuring a hot-dipped galvanizing process and UL listed Type 4X PVC-coated conduit bodies, ensuring durability in the most demanding environments.