Authorized ABB Distributor (Installation Products)
ABB - Installation Products ULCK 8 HS - Copper Heat-Shrink In-Line Compression Splice Kits, conductor size 8 Copper, includes Splice and Heat Shrink Tubing

ABB Installation Products ULCK 8 HS Copper Heat-Shrink In-Line Compression Splice Kits, conductor size 8 Copper, includes…

UPC: 783786072644


Documents & Media
Installation InstructionsManufacturer Product Website

Contact for Pricing

Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.

Overview

The ABB ULCK 8 HS is a copper heat-shrink in-line compression splice kit engineered for reliable, permanent electrical connections in 8 AWG copper conductors. This kit combines a high-conductivity copper splice with durable heat-shrink tubing to deliver a mechanically robust, insulated, and environmentally sealed joint. The splice is designed for in-line applications, enabling straightforward installation in confined spaces such as control panels, power distribution systems, and industrial equipment wiring. The heat-shrink tubing provides critical insulation and environmental protection, preventing moisture ingress, corrosion, and contamination that can compromise electrical integrity. This method ensures long-term reliability in demanding industrial environments where consistent performance and safety are paramount. The ULCK 8 HS is part of ABB’s trusted line of installation products, designed for use in power distribution, control systems, and equipment wiring where secure conductor joining is essential. The kit’s design facilitates efficient termination and splicing of 8 AWG copper wires, making it a practical solution for both new installations and maintenance operations. ABB’s engineering ensures compatibility with standard tools and practices in electrical installations, providing a dependable method for achieving permanent, high-quality splices.
  • Designed for 8 AWG copper conductors
  • Includes high-conductivity copper splice and heat-shrink tubing
  • Provides mechanical protection and environmental sealing
  • In-line design for installation in confined spaces
  • Suitable for power distribution, control systems, and industrial equipment wiring

Specifications

Application
Watertight Repair Splice
Conductor Range
#8 AWG
Connection
Compression
Connection Type
Compression Splice
Insulation
Yes
Material
Copper
Material
Copper Connector, Polyolefin Cover
Number Of Conductors
2
Size
8 AWG
Size
8
Special Features
Connectors have a Center Cable Stop to ensure equal cable insertion. Include one submersible splice cover to ensure a fully insulated, watertight repair splice
Standard
UL E100543
Type
Compression Splice Service Entrance Insulated
Package Dimensions (L x W x H)
0.01 IN x 0.01 IN x 0.01 IN
Package Dimensions (L x W x H)
0.0254 cm x 0.0254 cm x 0.0254 cm
Package Weight (Imperial)
0.1800 L
Package Weight (Metric)
0.0820 kg
Long Barrel Two-Way Copper Connector, Cable Size AWG 8 STR, Navy 14-23 (7), 1-3/4 inch length, 1/4 inch Diameter, Die Color Red, Die Code 21. Silver Plated

271-30630-1

Long Barrel Two-Way Copper Connector, Cable Size AWG 8 STR, Navy 14-23 (7), 1-3/4 inch length, 1/4 inch Diameter, Die Color Red, Die Code 21. Silver Plated
CU CMP Lug Long 4 AWG 1/4 Bolt-Peep

L350NP

CU CMP Lug Long 4 AWG 1/4 Bolt-Peep
Panduit BS18-C Non-Insulated Butt Splice

BS18-C

Panduit BS18-C Non-Insulated Butt Splice
Radiating Rib Splice System, Aluminum Compression Slice Kit, 4/0 to 2/0 AWG, Instruction Sheet included. For Aluminum Conductors Only.

RRK 4020-INS

Radiating Rib Splice System, Aluminum Compression Slice Kit, 4/0 to 2/0 AWG, Instruction Sheet included. For Aluminum Conductors Only.
Radiating Rib Splice System, Aluminum Compression Slice Kit, 350 KCMIL to 4/0, Aluminum, Instruction Sheet included. For Aluminum Conductors Only.

RRK 35040-INS

Radiating Rib Splice System, Aluminum Compression Slice Kit, 350 KCMIL to 4/0, Aluminum, Instruction Sheet included. For Aluminum Conductors Only.
Aluminum Heat-Shrink Compression Splice Kits, wire range 350, connector length 4-1/2 inch, insulator length 7-1/2 inch, dies 840,TX,76,249,11A, no color code. For Aluminum Conductors Only.

RRK 350 HS

Aluminum Heat-Shrink Compression Splice Kits, wire range 350, connector length 4-1/2 inch, insulator length 7-1/2 inch, dies 840,TX,76,249,11A, no color code. For Aluminum Conductors Only.
Aluminum Heat-Shrink Compression Splice Kits, wire range 2/0, connector length 3 inch, insulator length 5-1/2 inch, dies 5/8 (5), color code Gray. For Aluminum Conductors Only.

RRK 20 HS

Aluminum Heat-Shrink Compression Splice Kits, wire range 2/0, connector length 3 inch, insulator length 5-1/2 inch, dies 5/8 (5), color code Gray. For Aluminum Conductors Only.
Aluminum Flood-Seal Compression Splice Kits, wire range 1, connector length 3 inch, insulator length 5-1/2 inch, dies 5/8 (5), color code Gray/Red. For Aluminum Conductors Only.

RRK 201

Aluminum Flood-Seal Compression Splice Kits, wire range 1, connector length 3 inch, insulator length 5-1/2 inch, dies 5/8 (5), color code Gray/Red. For Aluminum Conductors Only.

How to Install a Heat-Shrink Compression Splice Kit

This guide provides step-by-step instructions for installing a heat-shrink compression splice kit, including cable preparation, connector crimping, and heat-shrink application for a secure electrical connection. Installation should be performed by a qualified electrician following all national and local electrical codes.

Estimated time: 30m

Tools needed:

Torches, Wire brush, Crimping tool, Safety glasses, Protective gloves

Supplies needed:

Heat-shrink tubing, Compression connector, Oxide inhibitor (for aluminum)

  1. Strip Cable Insulation

    WARNING: Risk of shock, disconnect all power to the cable before beginning installation. Strip the insulation from both ends of the cable. The stripped length should be 1/2 the length of the connector plus an additional 1/4 inch.

  2. Clean Cable Insulation

    Thoroughly clean the exposed cable insulation to ensure proper adhesion of the heat-shrink tubing.

  3. Place Heat-Shrink Tubing

    Carefully place the heat-shrink tubing over one of the clean cable ends. Protect the tubing from potential damage by the conductor strands as it slides over the cable end.

  4. Prepare Conductor Strands

    Wire brush the conductor strands. If working with aluminum conductors, coat the conductor with oxide inhibitor and wire brush it into the strands to ensure good contact.

  5. Install and Crimp Connector

    Install the connector onto the prepared cable ends. Crimp the connector using the recommended die, which is typically marked on the connector itself. After crimping, clean and deburr the connector if required to remove any sharp edges or debris.

  6. Shrink Heat-Shrink Tubing

    Center the heat-shrink tubing over the splice. Using a torch with a rapid brushing motion, apply the outer 3-4 inch tip of the flame to the heat-shrinkable material. Keep the flame moving constantly to avoid scorching. Begin shrinking at the center of the tube, working the flame uniformly around all sides. Once the center is shrunk, work the torch towards one end, then to the opposite end until the entire tube is completely shrunk.

  7. Inspect and Cool Splice

    Inspect the completed splice. A properly installed tube will be smooth and conform tightly to the connection, with adhesive visible at both ends. Reheat any flat spots or wrinkles to ensure a complete seal. Allow the installation to cool completely before touching, moving, or placing it into service.

Frequently Asked Questions about ABB - Installation Products

How are Thomas and Betts products typically installed?

Thomas and Betts products are installed using a variety of methods tailored to specific applications, including the use of flexible cords and cable fittings, non-metallic cable glands, and armored cable fittings. Proper selection of fittings is crucial to match the cable type and installation environment, ensuring durability and preventing physical damage. Tools such as the Blackburn® Comfort Crimp® and HEX-FLEX® systems enhance installation efficiency and reliability, reducing labor time and ensuring secure connections.

What accessories are available for Thomas and Betts products?

Thomas and Betts offers a comprehensive range of accessories for their products, including various cord and cable fittings, non-metallic cable glands, service entrance cable fittings, and armored cable fittings. Their accessories are designed to enhance installation efficiency and ensure compatibility with different cable types and environmental conditions, providing reliable connections for a wide array of applications.

What environmental ratings do Thomas and Betts products have?

Thomas and Betts products feature robust environmental ratings, including NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications, as well as IEC 60529 IP66 protection. These ratings ensure that their products are designed to withstand harsh industrial environments, with capabilities to resist dust, water, and corrosion, and operate effectively in a wide temperature range.

What communication protocols do Thomas and Betts products support?

Thomas and Betts products support a wide range of industrial communication protocols, including Ethernet, DeviceNet, PROFIBUS, Modbus, CANopen, and others. This extensive compatibility ensures seamless integration and reliable communication across various industrial automation systems, catering to diverse application needs.

What are the key features of Thomas and Betts products?

Thomas and Betts products are known for their innovative designs, high performance, and compliance with industry standards such as the National Electrical Code and Underwriters' Laboratories. They offer a comprehensive range of rugged and reliable electrical fittings, including liquidtight and dust-tight connections, which enhance installation efficiency and reduce overall project costs. Their products are engineered for durability in harsh environments, ensuring long-term reliability and lower installed costs.

What are the main product lines offered by Thomas and Betts?

Thomas and Betts offers a comprehensive range of product lines including electrical connectors, cable management systems, grounding and bonding solutions, and industrial automation components. Their products are designed for durability and reliability in demanding industrial environments, ensuring optimal performance and safety across various applications.

What technical support does Thomas and Betts offer?

Thomas and Betts offers comprehensive technical support, including access to field application engineers for onsite training and installation assistance. Their technical support staff is available to address inquiries related to product specifications and installation practices, ensuring optimal performance and safety of electrical systems. Additionally, they provide a variety of training programs to enhance the knowledge and skills of users in the field.

What industries and applications are Thomas and Betts products used for?

Thomas and Betts products are utilized across various industries including electrical construction, industrial automation, telecommunications, and utilities. Their extensive range of cord and cable fittings, electrical boxes, and metal framing systems are designed for applications that require durability and reliability in harsh environments, ensuring optimal performance in both permanent and temporary installations.

What certifications and standards do Thomas and Betts products comply with?

Thomas and Betts products comply with critical international certifications including UL (Underwriters Laboratories), CSA (Canadian Standards Association), and CE (European Community). Our products are designed to meet rigorous industrial standards such as NEMA enclosure ratings and IEC 60529 IP ratings, ensuring safety and reliability across various industrial applications.

What are the main product lines offered by Ocal?

Ocal offers a comprehensive range of corrosion-resistant conduit systems, including PVC-coated conduit and fittings, conduit bodies, hazardous location fittings, and strut accessories. Their products are designed to provide superior corrosion protection, featuring a hot-dipped galvanizing process and UL listed Type 4X PVC-coated conduit bodies, ensuring durability in the most demanding environments.