Authorized ABB Distributor (Installation Products)
ABB - Installation Products RRK 20 HS - Aluminum Heat-Shrink Compression Splice Kits, wire range 2/0, connector length 3 inch, insulator length 5-1/2 inch, dies 5/8 (5), color code Gray. For Aluminum Conductors Only.

ABB Installation Products RRK 20 HS Aluminum Heat-Shrink Compression Splice Kits, wire range 2/0, connector length 3 inch…

UPC: 783786746057


Documents & Media
Installation InstructionsManufacturer Product Website

Contact for Pricing

Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.

Overview

The ABB RRK 20 HS is a heat-shrink compression splice kit specifically engineered for terminating aluminum conductors. This kit is designed for wire sizes ranging from 2/0 AWG. The connector itself measures 3 inches in length, providing ample surface area for a secure crimp. The integrated insulator extends to 5-1/2 inches, ensuring proper electrical isolation and protection after installation. The RRK 20 HS utilizes a Gray color code, which is standard for this type of aluminum splice. Installation requires the use of 5/8 inch dies, with five dies included in the kit to ensure proper compression. This product is exclusively for use with aluminum conductors, offering a reliable method for joining or extending aluminum power cables. The heat-shrink technology allows for a tight, weather-resistant seal once applied with a heat gun, protecting the splice from environmental factors and mechanical stress. ABB Installation Products is the manufacturer of this specific kit, SKU RRK 20 HS, ensuring adherence to their quality standards for electrical connections.
  • Designed for 2/0 AWG aluminum conductors only
  • 3-inch connector length for secure crimping
  • 5-1/2 inch insulator length for electrical protection
  • Includes 5/8 inch dies (5 count) for proper compression
  • Gray color code for identification

Specifications

Application
Heat-Shrink Tubing Created Sealed, Watertight Splices
Color
Gray
Conductor Range
2/0 AWG
Connection
Compression
Material
Aluminum
Series
RRK 20 HS
Size
Connector 3 inches, Cover 5-1/2 inches
Size
2/0
Special Features
Heavy-Wall Heat-Shrink Tubing- Crimp the two pieces of wire together, then head the splice with a hot-air gun to get a fully sealed, watertight repair splice. Radiating Rib dissipates heat, centers the watertight insulating cover and seals perfectly every time. Prefilled with Oxide-Inhibitor to prevent oxidation and keep out moisture
Type
Compression Splice
Package Dimensions (L x W x H)
0.01 IN x 0.01 IN x 0.01 IN
Package Dimensions (L x W x H)
0.0254 cm x 0.0254 cm x 0.0254 cm
Package Weight (Imperial)
1.0000 L
Package Weight (Metric)
0.4540 kg
Aluminum Compression Splice, 2/0 Compressed - Compact. Installing Dies TX, 76, 249, 840, 845, 11A. Length 4-1/64 inch. Center Stop. Oxide Inhibitor. Gray Caps. For both Aluminum and Copper Conductors.

SK 1010

Aluminum Compression Splice, 2/0 Compressed - Compact. Installing Dies TX, 76, 249, 840, 845, 11A. Length 4-1/64 inch. Center Stop. Oxide Inhibitor. Gray Caps. For both Aluminum and Copper Conductors.
1 HoleStandard BarrelAluminum Compression Lug2/0 AWG -3/8 Bolt Standard BarrelAluminum Compression Lugs is a type ofaluminum compression connector that is produced from high conductivityaluminum tubing.Center stop assures proper cable installation.They are tin-plated to provide corrosion resistance and are marked with die index and color coded for easy reference. Listed for 35KV maximum when properly installed.

AL2/0-38

1 HoleStandard BarrelAluminum Compression Lug2/0 AWG -3/8 Bolt Standard BarrelAluminum Compression Lugs is a type ofaluminum compression connector that is produced from high conductivityaluminum tubing.Center stop assures proper cable installation.They are tin-plated to provide corrosion resistance and are marked with die index and color coded for easy reference. Listed for 35KV maximum when properly installed.
Aluminum Compression Splice, Tin-Plated to inhibit corrosion, high conductivity thick wall aluminum, Factory pre-filled joint compound and sealed with easy pull-out end plug to inhibit corrosion, Panduit and specified competitor die index numbers marked on barrel for proper crimp die selection, Internal solid stop prevents over-insertion of conductor, UL Listed and CSA Certified to 35 KV and temperature rated to 90C when crimped with Panduit and specified competitor crimping tools and dies.

SA6-T

Aluminum Compression Splice, Tin-Plated to inhibit corrosion, high conductivity thick wall aluminum, Factory pre-filled joint compound and sealed with easy pull-out end plug to inhibit corrosion, Panduit and specified competitor die index numbers marked on barrel for proper crimp die selection, Internal solid stop prevents over-insertion of conductor, UL Listed and CSA Certified to 35 KV and temperature rated to 90C when crimped with Panduit and specified competitor crimping tools and dies.
Aluminum Flood-Seal Compression Splice Kits, wire range 1, connector length 3 inch, insulator length 5-1/2 inch, dies 5/8 (5), color code Gray/Red. For Aluminum Conductors Only.

RRK 201

Aluminum Flood-Seal Compression Splice Kits, wire range 1, connector length 3 inch, insulator length 5-1/2 inch, dies 5/8 (5), color code Gray/Red. For Aluminum Conductors Only.
Aluminum Compression Splice Kit, Wire Range 4/0 ACSR STR Aluminum, Die 840, TX, 76, 249, 11A. Contains Oxide Inhibiting Compound. 10 inch long Connector Splice with 1.88 inch Deep Bores on each end. Includes (2) Santoprene Rockets and EPDM Rubber Liner and Silicon Grease.

FSK 4/0-10 W/FSS7141

Aluminum Compression Splice Kit, Wire Range 4/0 ACSR STR Aluminum, Die 840, TX, 76, 249, 11A. Contains Oxide Inhibiting Compound. 10 inch long Connector Splice with 1.88 inch Deep Bores on each end. Includes (2) Santoprene Rockets and EPDM Rubber Liner and Silicon Grease.
Aluminum Compression Splice Reducer Kits, Wire Range 500 kcmil Al-CU reduced to 1/0 STR AL-CU, Kit contains Splice, Cover and Cap, Silicone Grease.

FSK 500 R 1/0

Aluminum Compression Splice Reducer Kits, Wire Range 500 kcmil Al-CU reduced to 1/0 STR AL-CU, Kit contains Splice, Cover and Cap, Silicone Grease.
Aluminum Compression Splice Kit, 10 Inch Splice, 2/0 STR Aluminum 2/0 ACSR, Die 840, Contains Oxide Inhibiting Compound. Kit contains (1) Splice, (2) Rockets with liners, Silicone Grease, (1) CPL500 - Coupler Repair Splice Cover.

FSK 2/0-10 W/FSS7141

Aluminum Compression Splice Kit, 10 Inch Splice, 2/0 STR Aluminum 2/0 ACSR, Die 840, Contains Oxide Inhibiting Compound. Kit contains (1) Splice, (2) Rockets with liners, Silicone Grease, (1) CPL500 - Coupler Repair Splice Cover.
Aluminum Compression Splice Reducer Kits, Wire Range 500 kcmil AL-CU reduced to 2/0 STR AL-CU, Kit contains Splice, Cover and Cap, Silicone Grease.

FSK 500 R 2/0

Aluminum Compression Splice Reducer Kits, Wire Range 500 kcmil AL-CU reduced to 2/0 STR AL-CU, Kit contains Splice, Cover and Cap, Silicone Grease.

How to Install a Heat-Shrink Compression Splice Kit

This guide provides step-by-step instructions for installing a heat-shrink compression splice kit, including cable preparation, conductor treatment, connector crimping, and proper heat-shrink application. CAUTION: Product should be installed by a qualified electrician in accordance with national and local electrical codes.

Estimated time: 30m

Tools needed:

Torches, Wire brush, Crimping tool with recommended die, Safety glasses, Protective gloves

Supplies needed:

Heat-shrink tubing, Compression connector, Cable, Oxide inhibitor (for aluminum conductors only)

  1. Disconnect Power and Prepare Cable Insulation

    WARNING: Risk of shock, disconnect power before installation. Strip both ends of the cable insulation 1/2 the length of the connector, plus 1/4 inch, as shown in Figure 1.

  2. Clean Cable and Place Heat-Shrink Tubing

    Clean the stripped cable insulation. Place the heat-shrink tubing over the clean cable. Protect the heat-shrink tubing from possible damage from the conductor as it is placed over the cable end, as shown in Figure 2.

  3. Prepare Conductor Strands

    Wire brush the conductor strands. If using aluminum conductors, coat the conductor with oxide inhibitor and wire brush it into the strands.

  4. Install and Crimp Connector

    Install the connector onto the prepared cable ends and crimp it using the recommended die marked on the connector. After installation, clean and deburr the connector if required, as shown in Figure 3.

  5. Apply Heat-Shrink Tubing

    Center the heat-shrink tubing over the splice and hold it in place. Apply the outer 3" - 4" tip of the flame to the heat-shrinkable material with a rapid brushing motion. Keep the flame moving to avoid scorching. Begin shrinking at the center of the tube, working the flame around all sides to apply uniform heat (a). After the center portion shrinks, work the torch toward one end (b), then to the opposite end (c) until completely shrunk, as shown in Figure 4. Follow manufacturer’s safety precautions when using gas torches.

  6. Inspect Splice and Allow to Cool

    Inspect the complete splice. A properly installed tube will be smooth and conform to the connection, with adhesive visible at both ends. Reheat any flat spots or wrinkles. Allow the installation to cool before touching, moving, or placing it in service.

Frequently Asked Questions about ABB - Installation Products

How are Thomas and Betts products typically installed?

Thomas and Betts products are installed using a variety of methods tailored to specific applications, including the use of flexible cords and cable fittings, non-metallic cable glands, and armored cable fittings. Proper selection of fittings is crucial to match the cable type and installation environment, ensuring durability and preventing physical damage. Tools such as the Blackburn® Comfort Crimp® and HEX-FLEX® systems enhance installation efficiency and reliability, reducing labor time and ensuring secure connections.

What accessories are available for Thomas and Betts products?

Thomas and Betts offers a comprehensive range of accessories for their products, including various cord and cable fittings, non-metallic cable glands, service entrance cable fittings, and armored cable fittings. Their accessories are designed to enhance installation efficiency and ensure compatibility with different cable types and environmental conditions, providing reliable connections for a wide array of applications.

What environmental ratings do Thomas and Betts products have?

Thomas and Betts products feature robust environmental ratings, including NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications, as well as IEC 60529 IP66 protection. These ratings ensure that their products are designed to withstand harsh industrial environments, with capabilities to resist dust, water, and corrosion, and operate effectively in a wide temperature range.

What communication protocols do Thomas and Betts products support?

Thomas and Betts products support a wide range of industrial communication protocols, including Ethernet, DeviceNet, PROFIBUS, Modbus, CANopen, and others. This extensive compatibility ensures seamless integration and reliable communication across various industrial automation systems, catering to diverse application needs.

What are the key features of Thomas and Betts products?

Thomas and Betts products are known for their innovative designs, high performance, and compliance with industry standards such as the National Electrical Code and Underwriters' Laboratories. They offer a comprehensive range of rugged and reliable electrical fittings, including liquidtight and dust-tight connections, which enhance installation efficiency and reduce overall project costs. Their products are engineered for durability in harsh environments, ensuring long-term reliability and lower installed costs.

What are the main product lines offered by Thomas and Betts?

Thomas and Betts offers a comprehensive range of product lines including electrical connectors, cable management systems, grounding and bonding solutions, and industrial automation components. Their products are designed for durability and reliability in demanding industrial environments, ensuring optimal performance and safety across various applications.

What technical support does Thomas and Betts offer?

Thomas and Betts offers comprehensive technical support, including access to field application engineers for onsite training and installation assistance. Their technical support staff is available to address inquiries related to product specifications and installation practices, ensuring optimal performance and safety of electrical systems. Additionally, they provide a variety of training programs to enhance the knowledge and skills of users in the field.

What industries and applications are Thomas and Betts products used for?

Thomas and Betts products are utilized across various industries including electrical construction, industrial automation, telecommunications, and utilities. Their extensive range of cord and cable fittings, electrical boxes, and metal framing systems are designed for applications that require durability and reliability in harsh environments, ensuring optimal performance in both permanent and temporary installations.

What certifications and standards do Thomas and Betts products comply with?

Thomas and Betts products comply with critical international certifications including UL (Underwriters Laboratories), CSA (Canadian Standards Association), and CE (European Community). Our products are designed to meet rigorous industrial standards such as NEMA enclosure ratings and IEC 60529 IP ratings, ensuring safety and reliability across various industrial applications.

What are the main product lines offered by Ocal?

Ocal offers a comprehensive range of corrosion-resistant conduit systems, including PVC-coated conduit and fittings, conduit bodies, hazardous location fittings, and strut accessories. Their products are designed to provide superior corrosion protection, featuring a hot-dipped galvanizing process and UL listed Type 4X PVC-coated conduit bodies, ensuring durability in the most demanding environments.