Authorized ABB Distributor (Installation Products)
ABB - Installation Products RRK 35040-INS - Radiating Rib Splice System, Aluminum Compression Slice Kit, 350 KCMIL to 4/0, Aluminum, Instruction Sheet included. For Aluminum Conductors Only.

ABB Installation Products RRK 35040-INS Radiating Rib Splice System, Aluminum Compression Slice Kit, 350 KCMIL to 4/0, Aluminum…

UPC: 075114176040


Documents & Media
Installation InstructionsManufacturer Product Website

Contact for Pricing

Minimum Qty: 75

Multiplier: 75

*Contact for lower quantities*

Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.

Overview

The ABB RRK 35040-INS Radiating Rib Splice System is a compression splice kit designed specifically for aluminum conductors ranging from 350 KCMIL to 4/0. Manufactured by ABB Installation Products, this splice system ensures reliable, long-term electrical connections in industrial and commercial applications where aluminum conductors are standard. The kit includes an instruction sheet for proper installation, reducing setup time and minimizing errors. The radiating rib design enhances conductor grip and improves current distribution across the splice, reducing hot spots and extending service life. This compression-style splice is ideal for applications such as power distribution panels, switchgear, motor control centers, and renewable energy systems where aluminum conductors are commonly used. The aluminum construction ensures compatibility with aluminum conductors and maintains consistent electrical performance over time. Unlike mechanical splices, compression splices like the RRK 35040-INS provide a permanent, gas-tight connection that resists vibration and thermal cycling, which is critical in high-load environments. The splice kit is part of ABB’s Installation Products line, known for durable and compliant electrical components. For aluminum conductor splicing between 350 KCMIL and 4/0, the RRK 35040-INS delivers a secure, code-compliant solution with minimal maintenance requirements.
  • Designed for aluminum conductors from 350 KCMIL to 4/0
  • Compression connection type for permanent, gas-tight joints
  • Radiating rib design improves conductor grip and current distribution
  • Includes instruction sheet for proper installation
  • Part of ABB Installation Products line for industrial reliability

Specifications

Application
Dissipate Heat and Make Perfect Watertight Seals
Color
Red/Pink
Conductor Range
4/0 to 350 kcml
Connection
Compression
Insulation
Yes
Material
Aluminum Connector, EPDM Cover
Number Of Conductors
2
Size
4-1/2 inch Connector, 7-1/2 inch Cover
Special Features
Prefilled with Oxide Inhibitor to Prevent Oxidation an Keep Out Moisture. Rubber Flood-Seal Insulating Cover fits Snugly for Maximum Heat Dissipation, No Tape Required. Compact Size. Radiating Rib Design Dissipated Heat, Centers the Watertight Insulating Cover and Seals Perfectly Every Time
Standard
ANSI C119.4
Type
Compression Splice Service Entrance Insulated
Package Dimensions (L x W x H)
0.01 IN x 0.01 IN x 0.01 IN
Package Dimensions (L x W x H)
0.0254 cm x 0.0254 cm x 0.0254 cm
Package Weight (Imperial)
0.3500 L
Package Weight (Metric)
0.1590 kg
Radiating Rib, Aluminum Compression Splice, 350 kcmil to 4/0 Aluminum. 4.500 inch Long x Widest Diameter 1.100 inch. Center Stop. Pink Cap and Red Cap, Oxide Inhibiting Compound.

RRS 35040

Radiating Rib, Aluminum Compression Splice, 350 kcmil to 4/0 Aluminum. 4.500 inch Long x Widest Diameter 1.100 inch. Center Stop. Pink Cap and Red Cap, Oxide Inhibiting Compound.
Pre-Insulated Service Entry Sleeves 1/0 - 2 Str Pre-insulated service entry sleeves are used for fast and easy installation with standard tools. For combinations of aluminum-aluminum and aluminum-copper conductors. Meets the requirements of ANSI C119.4. Rated 600 Volts.

ISE135

Pre-Insulated Service Entry Sleeves 1/0 - 2 Str Pre-insulated service entry sleeves are used for fast and easy installation with standard tools. For combinations of aluminum-aluminum and aluminum-copper conductors. Meets the requirements of ANSI C119.4. Rated 600 Volts.
Aluminum splice, type SA, tin plated, 500 kcmil.

SA500-2

Aluminum splice, type SA, tin plated, 500 kcmil.
Aluminum Heat-Shrink Compression Splice Kits, wire range 350, connector length 4-1/2 inch, insulator length 7-1/2 inch, dies 840,TX,76,249,11A, no color code. For Aluminum Conductors Only.

RRK 350 HS

Aluminum Heat-Shrink Compression Splice Kits, wire range 350, connector length 4-1/2 inch, insulator length 7-1/2 inch, dies 840,TX,76,249,11A, no color code. For Aluminum Conductors Only.
Aluminum Heat-Shrink Compression Splice Kits, wire range 2/0, connector length 3 inch, insulator length 5-1/2 inch, dies 5/8 (5), color code Gray. For Aluminum Conductors Only.

RRK 20 HS

Aluminum Heat-Shrink Compression Splice Kits, wire range 2/0, connector length 3 inch, insulator length 5-1/2 inch, dies 5/8 (5), color code Gray. For Aluminum Conductors Only.
Aluminum Flood-Seal Compression Splice Kits, wire range 1, connector length 3 inch, insulator length 5-1/2 inch, dies 5/8 (5), color code Gray/Red. For Aluminum Conductors Only.

RRK 201

Aluminum Flood-Seal Compression Splice Kits, wire range 1, connector length 3 inch, insulator length 5-1/2 inch, dies 5/8 (5), color code Gray/Red. For Aluminum Conductors Only.
Aluminum Compression Splice Kit, Wire Range 4/0 ACSR STR Aluminum, Die 840, TX, 76, 249, 11A. Contains Oxide Inhibiting Compound. 10 inch long Connector Splice with 1.88 inch Deep Bores on each end. Includes (2) Santoprene Rockets and EPDM Rubber Liner and Silicon Grease.

FSK 4/0-10 W/FSS7141

Aluminum Compression Splice Kit, Wire Range 4/0 ACSR STR Aluminum, Die 840, TX, 76, 249, 11A. Contains Oxide Inhibiting Compound. 10 inch long Connector Splice with 1.88 inch Deep Bores on each end. Includes (2) Santoprene Rockets and EPDM Rubber Liner and Silicon Grease.
Aluminum Compression Splice Reducer Kits, Wire Range 500 kcmil Al-CU reduced to 1/0 STR AL-CU, Kit contains Splice, Cover and Cap, Silicone Grease.

FSK 500 R 1/0

Aluminum Compression Splice Reducer Kits, Wire Range 500 kcmil Al-CU reduced to 1/0 STR AL-CU, Kit contains Splice, Cover and Cap, Silicone Grease.

How to Install the RRK Series Radiating Rib Splice System

This guide provides step-by-step instructions for installing the 'Flood-Seal' EPDM Insulated RRK Series Radiating Rib Splice System, ensuring a secure and properly sealed electrical connection.

Estimated time: 30m

Tools needed:

Cable strippers, Crimping tool with recommended dies

Supplies needed:

RRK Series connector, EPDM rubber sleeve, Dielectric grease (if not pre-applied)

  1. Observe Safety Warnings

    Ensure installation is performed by trained installers in accordance with all applicable local, state, and national electrical codes, installation standards, and safety rules to prevent danger of electric shock.

  2. Strip Cable Ends

    Strip the ends of the electrical cables according to the following chart: #2 to 2/0 (1-1/2 inches), 3/0 to 4/0 (2-1/4 inches), 250 to 350 mcm (2-1/2 inches), 500 mcm (2-3/4 inches).

  3. Slide EPDM Rubber Sleeve onto Conductor

    Slide the EPDM rubber sleeve onto one of the conductors. If there is excess grease on the conductor, move it to the conductor insulation for later use in Step 5.

  4. Insert Conductors and Crimp

    Insert the stripped ends of the conductors into the RRK Series connector. Crimp the connector using the recommended dies marked on the connector. For 3/0 and 4/0 sizes, begin crimping at the designated 'BEGIN CRIMPING HERE' mark and avoid crimping at the 'DO NOT CRIMP HERE' area.

  5. Spread Excess Grease

    Spread any excess grease, previously set aside from Step 3, over the entire crimped connector to ensure a complete seal.

  6. Position EPDM Rubber Sleeve

    Slide the EPDM rubber sleeve over the crimped connection until it locks firmly in position. Visually inspect the installed sleeve; a single 'hump' in the rubber sleeve indicates proper installation.

Frequently Asked Questions about ABB - Installation Products

How are Thomas and Betts products typically installed?

Thomas and Betts products are installed using a variety of methods tailored to specific applications, including the use of flexible cords and cable fittings, non-metallic cable glands, and armored cable fittings. Proper selection of fittings is crucial to match the cable type and installation environment, ensuring durability and preventing physical damage. Tools such as the Blackburn® Comfort Crimp® and HEX-FLEX® systems enhance installation efficiency and reliability, reducing labor time and ensuring secure connections.

What accessories are available for Thomas and Betts products?

Thomas and Betts offers a comprehensive range of accessories for their products, including various cord and cable fittings, non-metallic cable glands, service entrance cable fittings, and armored cable fittings. Their accessories are designed to enhance installation efficiency and ensure compatibility with different cable types and environmental conditions, providing reliable connections for a wide array of applications.

What environmental ratings do Thomas and Betts products have?

Thomas and Betts products feature robust environmental ratings, including NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications, as well as IEC 60529 IP66 protection. These ratings ensure that their products are designed to withstand harsh industrial environments, with capabilities to resist dust, water, and corrosion, and operate effectively in a wide temperature range.

What communication protocols do Thomas and Betts products support?

Thomas and Betts products support a wide range of industrial communication protocols, including Ethernet, DeviceNet, PROFIBUS, Modbus, CANopen, and others. This extensive compatibility ensures seamless integration and reliable communication across various industrial automation systems, catering to diverse application needs.

What are the key features of Thomas and Betts products?

Thomas and Betts products are known for their innovative designs, high performance, and compliance with industry standards such as the National Electrical Code and Underwriters' Laboratories. They offer a comprehensive range of rugged and reliable electrical fittings, including liquidtight and dust-tight connections, which enhance installation efficiency and reduce overall project costs. Their products are engineered for durability in harsh environments, ensuring long-term reliability and lower installed costs.

What are the main product lines offered by Thomas and Betts?

Thomas and Betts offers a comprehensive range of product lines including electrical connectors, cable management systems, grounding and bonding solutions, and industrial automation components. Their products are designed for durability and reliability in demanding industrial environments, ensuring optimal performance and safety across various applications.

What technical support does Thomas and Betts offer?

Thomas and Betts offers comprehensive technical support, including access to field application engineers for onsite training and installation assistance. Their technical support staff is available to address inquiries related to product specifications and installation practices, ensuring optimal performance and safety of electrical systems. Additionally, they provide a variety of training programs to enhance the knowledge and skills of users in the field.

What industries and applications are Thomas and Betts products used for?

Thomas and Betts products are utilized across various industries including electrical construction, industrial automation, telecommunications, and utilities. Their extensive range of cord and cable fittings, electrical boxes, and metal framing systems are designed for applications that require durability and reliability in harsh environments, ensuring optimal performance in both permanent and temporary installations.

What certifications and standards do Thomas and Betts products comply with?

Thomas and Betts products comply with critical international certifications including UL (Underwriters Laboratories), CSA (Canadian Standards Association), and CE (European Community). Our products are designed to meet rigorous industrial standards such as NEMA enclosure ratings and IEC 60529 IP ratings, ensuring safety and reliability across various industrial applications.

What are the main product lines offered by Ocal?

Ocal offers a comprehensive range of corrosion-resistant conduit systems, including PVC-coated conduit and fittings, conduit bodies, hazardous location fittings, and strut accessories. Their products are designed to provide superior corrosion protection, featuring a hot-dipped galvanizing process and UL listed Type 4X PVC-coated conduit bodies, ensuring durability in the most demanding environments.