ABB Installation Products STX200-472 Star Teck hazardous location aluminum jacketed cable fitting. Hub size of 2 inches.…
UPC: 786210904665
Contact for Pricing
Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.
Overview
- 2-inch NPT hub size for secure enclosure connection
- Handles aluminum jacketed cable diameters from 1.700 to 1.965 inches
- Stainless steel retaining ring for corrosion resistance and non-magnetic performance
- Power-Grip grounding ring provides 360° long-term grounding
- Tapered bushing design prevents water ingress in vertical installations
Specifications
Application | For Hazardous Locations |
Color | Red;Silver |
Material | Aluminum |
Size | 2 Inch |
Size | 2 Inches |
Standard | UL E82038, CSA 23086 |
Type | Teck Cable Fittings |
Package Dimensions (L x W x H) | 0.01 IN x 0.01 IN x 0.01 IN |
Package Dimensions (L x W x H) | 0.0254 cm x 0.0254 cm x 0.0254 cm |
Package Weight (Imperial) | 1.6000 L |
Package Weight (Metric) | 0.7260 kg |
SH 101
Cap, Clamp-Type Service, Conduit Size 1/2 Inch, Number of Holes 4, Size 4(19/64 Inch), Aluminum, For Rigid/Intermediate or Thinwall
95138
Clamp-on service entrance cap for 4-inch EMT and rigid/IMC conduit. It is made of aluminum with a silver color and no additional finish. The enclosure is listed as Weatherhead.STX075-465
Star Teck hazardous location aluminum jacketed cable fitting. Hub size of 3/4 inch. Range over jacket from 0.725 - 0.885 inch.
LB75M-TB
Series 35 Back Opening 3/4 Inch Conduit Body, Body Material Malleable Iron, Finish Zinc Plating with an Aluminum, Acrylic Coating for Use with Rigid/IMC Conduit
TB17-TB
1/2 Inch Form 7 (TB) Conduit Body, Body Material Gray Iron with Zinc Plating and Baked on Epoxy Powder Coat with BlueKote Internal Coating for Use with Rigid/IMC ConduitFrequently Asked Questions
What sealing compounds are required for STX fittings?
STX fittings must be installed with either SC4-KIT-1 liquid compound or SC65 putty sealing compound, which are sold separately.
Which sealing compound is for shielded cables?
The SC4-KIT-1 liquid compound should be used for shielded cables and cables with 5 or more conductors, including ground.
What is the maximum conductor count for SC65 compound?
The SC65 sealing compound is suitable for cables with a maximum of 4 conductors, including ground, and is not recommended for shielded cables.
What is the operating temperature range for STX fittings?
The normal operating temperature range for STX fittings is -40 to +90°C (-40 to +194°F).
What is the ingress protection rating of STX cable glands?
STX cable glands have an ingress protection rating of Type 4 / 4X.
What is the NPT thread size for the STX075-465?
The STX075-465 has an NPT thread size of 3/4 inches.
What is the jacket diameter range for STX075-465?
The STX075-465 accommodates a jacket diameter range of 18.42 mm (0.725 in) minimum to 22.48 mm (0.885 in) maximum.
What is the armor diameter range for STX075-465?
The STX075-465 accommodates an armor diameter range of 15.67 mm (0.617 in) minimum to 20.45 mm (0.805 in) maximum.
What is the maximum sealing compound volume for STX075-465?
The STX075-465 requires a maximum volume of 8 cc of sealing compound.
Are there specific installation code requirements for this product?
Yes, the product must be installed in accordance with applicable national and local electrical codes.
How to Install the STX200-472 Star Teck Cable Fitting
This guide provides step-by-step instructions for preparing the cable, assembling the STX200-472 Star Teck fitting, and sealing it with liquid-type compound for hazardous locations. Installation must be performed by a qualified electrician in accordance with national and local electrical codes.
Estimated time: 2h
Tools needed:
Hacksaw, Wire strippers, Screwdriver, Damp cloth, Gloves
Supplies needed:
STX200-472 Cable Fitting, SC4-KIT-1 LIQUID SEALANT (2 units), Fiber damming material, Cable
- De-energize Circuits and Prepare Cable
WARNING: Risk of electrical shock. Before installing or performing maintenance, verify that all circuits are de-energized. Determine the working length of conductors required inside the enclosure or device. Remove a portion of the outer jacket to expose the armor, then cut the armor using a hacksaw. CAUTION: Do not nick or cut the conductor insulation.
- Trim Outer Jacket and Feed Cable
Trim the outer jacket to adjust the exposed armor strip length to between 1.700 and 1.965 inches, as indicated in the table for the STX200-472. Feed the cable through the gland nut opening and push until the cable armor hits the end stop.
- Tighten Gland Nut and Disassemble Fitting
Tighten the gland nut until you obtain an appropriate seal or to the maximum torque of 1600 in-lbs. Ensure the bushing and collar ring seal evenly around the cable’s outer jacket and are flush with the gland nut face, keeping the cable centered for an optimal seal. Disassemble the hub from the body sub-assembly by loosening the union, then unscrew the sealing chamber from the body sub-assembly.
- Prepare Conductors
Trim the inner jacket to a length of 1/8” to 3/8” to expose the conductor bundle. If using shielded data cables, additionally remove the outer (overall) shield from the conductor bundle, taking care not to nick or damage inner shields, and remove filler materials without disturbing inner shields.
- Pack Damming Material and Reassemble Sealing Chamber
Pack the fiber damming material tightly into all voids between conductors and the body. Spread strands of uninsulated grounding conductor, where applicable. Screw the sealing chamber back onto the body sub-assembly until it completely seats on the body.
- Mix and Dispense Liquid Sealing Compound
Position the cable/fitting into a vertical position. Mix the SC4-KIT-1 liquid sealing compound following instructions provided on the compound package. Dispense the sealing compound into the end of the sealing chamber until the level of compound stabilizes and fills to the top. CAUTION: Remove all excess compound material from outside of the sealing chamber with a damp cloth. Do not use abrasive cleaners such as powder cleaners, sand paper, steel wool, or wire brush that may damage the flame path.
- Mount Hub and Secure Assembly
Mount the hub in the desired location. When the sealing compound is solidified (after approximately 1 hour), place the encapsulated assembly into the hub and secure in position by tightening the union until it bottoms (metal to metal contact).
Frequently Asked Questions about ABB - Installation Products
How are Thomas and Betts products typically installed?
Thomas and Betts products are installed using a variety of methods tailored to specific applications, including the use of flexible cords and cable fittings, non-metallic cable glands, and armored cable fittings. Proper selection of fittings is crucial to match the cable type and installation environment, ensuring durability and preventing physical damage. Tools such as the Blackburn® Comfort Crimp® and HEX-FLEX® systems enhance installation efficiency and reliability, reducing labor time and ensuring secure connections.
What accessories are available for Thomas and Betts products?
Thomas and Betts offers a comprehensive range of accessories for their products, including various cord and cable fittings, non-metallic cable glands, service entrance cable fittings, and armored cable fittings. Their accessories are designed to enhance installation efficiency and ensure compatibility with different cable types and environmental conditions, providing reliable connections for a wide array of applications.
What environmental ratings do Thomas and Betts products have?
Thomas and Betts products feature robust environmental ratings, including NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications, as well as IEC 60529 IP66 protection. These ratings ensure that their products are designed to withstand harsh industrial environments, with capabilities to resist dust, water, and corrosion, and operate effectively in a wide temperature range.
What communication protocols do Thomas and Betts products support?
Thomas and Betts products support a wide range of industrial communication protocols, including Ethernet, DeviceNet, PROFIBUS, Modbus, CANopen, and others. This extensive compatibility ensures seamless integration and reliable communication across various industrial automation systems, catering to diverse application needs.
What are the key features of Thomas and Betts products?
Thomas and Betts products are known for their innovative designs, high performance, and compliance with industry standards such as the National Electrical Code and Underwriters' Laboratories. They offer a comprehensive range of rugged and reliable electrical fittings, including liquidtight and dust-tight connections, which enhance installation efficiency and reduce overall project costs. Their products are engineered for durability in harsh environments, ensuring long-term reliability and lower installed costs.
What are the main product lines offered by Thomas and Betts?
Thomas and Betts offers a comprehensive range of product lines including electrical connectors, cable management systems, grounding and bonding solutions, and industrial automation components. Their products are designed for durability and reliability in demanding industrial environments, ensuring optimal performance and safety across various applications.
What technical support does Thomas and Betts offer?
Thomas and Betts offers comprehensive technical support, including access to field application engineers for onsite training and installation assistance. Their technical support staff is available to address inquiries related to product specifications and installation practices, ensuring optimal performance and safety of electrical systems. Additionally, they provide a variety of training programs to enhance the knowledge and skills of users in the field.
What industries and applications are Thomas and Betts products used for?
Thomas and Betts products are utilized across various industries including electrical construction, industrial automation, telecommunications, and utilities. Their extensive range of cord and cable fittings, electrical boxes, and metal framing systems are designed for applications that require durability and reliability in harsh environments, ensuring optimal performance in both permanent and temporary installations.
What certifications and standards do Thomas and Betts products comply with?
Thomas and Betts products comply with critical international certifications including UL (Underwriters Laboratories), CSA (Canadian Standards Association), and CE (European Community). Our products are designed to meet rigorous industrial standards such as NEMA enclosure ratings and IEC 60529 IP ratings, ensuring safety and reliability across various industrial applications.
What are the main product lines offered by Ocal?
Ocal offers a comprehensive range of corrosion-resistant conduit systems, including PVC-coated conduit and fittings, conduit bodies, hazardous location fittings, and strut accessories. Their products are designed to provide superior corrosion protection, featuring a hot-dipped galvanizing process and UL listed Type 4X PVC-coated conduit bodies, ensuring durability in the most demanding environments.