
ABB Installation Products K675TBC-SP 15/25kV, 900 Amp, Deadbreak Bushing for In-Air Applications (Pad-Mounted or Vault-Type…
UPC: 783786498208
Contact for Pricing
Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.
Overview
- 15/25kV voltage rating
- 900 Amp current rating
- Suitable for pad-mounted, vault-type, or submersible transformers and switchgear
- Molded epoxy construction with stainless steel flange
- Includes boot and collar; one 5/8-11 UNC-2A stud factory installed
Specifications
Application | In-Air Applications |
Connection Type | 5/8-11 UNC-2A Stud |
Current Rating | 900 A |
Material | Molded Epoxy Body and Stainless Steel Flange |
Material | Molded Epoxy with Stainless Steel Flange |
Mounting Type | Pad-Mounted, Vault-Type, Submersible Transformers, Switchgear |
Series | K675TBC-SP |
Size | Overall Length 13.75 inch, Diameter 4.50 inch |
Size | 13.75 inch (Length) x 4.50 inch (Diameter) |
Special Features | Conductive Shield made of Molded Conductive EPDM makes Positive Ground Contact with EPDM Flange of Bushing Insert. Stainless Steel Flange Resists Corrosion and can be Externally Clamped or Welded to Apparatus. Stud Permanent |
Standard | ANSI/IEEE Standard 386 |
Temperature Rating, Maximum | 149 F |
Temperature Rating, Maximum | 65 C |
Temperature Rating, Minimum | -40 F |
Temperature Rating, Minimum | -40 C |
Type | Deadbreak Bushing - 900 Amps |
Voltage Rating | 15/25 kV |
Package Dimensions (L x W x H) | 0.01 IN x 0.01 IN x 0.01 IN |
Package Dimensions (L x W x H) | 0.0254 cm x 0.0254 cm x 0.0254 cm |
Package Weight (Imperial) | 1.0000 L |
Package Weight (Metric) | 0.4540 kg |

K675TBC
15/25kV, 900 Amp, Deadbreak Bushing for In-Air Applications (Pad-Mounted or Vault-Type or Submersible Transformers or Switchgear). One Factory installed 5/8-11 UNC-2A Stud included, other Stud must be Purchased Separately. Overall Length 13.75 inch, Diameter 4.50 inch. Molded Epoxy with Stainless Steel Flange. Boot and Collar.
775J3-5
900 Amp, 35kV, Deadbreak, 3-Point Junction, Rubber Junction, Stainless Steel U-straps and back plate.
775J2-5
900 Amp, 35kV, Deadbreak, 2-Point Junction, Rubber Junction, Stainless Steel U-straps and back plate.
775J4-U
900 Amp, 35kV, Deadbreak, 4-Point Junction, Rubber Junction with Stainless Steel Mounting Plate, Back Plane and Adjustable Mounting Bracket.
K150DR-CS2075
15/25kV 200 Amp, Deadbreak Insulated Cap. Bails are required, and Stainless Steel Junction Bail is Included. Does include a Nylon Vending Rod. CS2075 - for any customer.
J4-6666-35-SV
4 Point Junction, with four 600 Amp Bushing Interfaces, 35kV, 6-1/2 inch centers. No Tilt Mounting.Frequently Asked Questions
What interfaces are compatible with K650TBC/K675TBC bushings?
These bushings universally accept Elastimold 600A/900A Elbow or bushing extender interfaces.
What is the voltage class of these bushings?
The bushings have a 25kV voltage class.
What are the current ratings for K650TBC and K675TBC?
The K650TBC is rated for 600A (aluminum), and the K675TBC is rated for 900A (copper).
What is the continuous current rating?
The continuous current rating is 600 Amps.
What is the one-minute AC withstand rating?
The one-minute AC withstand rating is 40kV.
What is the impulse withstand rating?
The impulse withstand (BIL) rating is 125kV (1.2 x 50 microsecond wave).
What standard do these bushings meet?
These bushings meet ANSI/IEEE Standard 386, Latest Revision.
What type of connection does the K675TBC model use?
The K675TBC model uses an all copper threaded connection to the apparatus, rated for 900A.
How are these bushings mounted to apparatus?
They have a stainless steel flange that allows for welding or external clamping to the apparatus.
What is the shank length of these bushings?
The bushings are available with a short shank length of 8.563 inches for cover or side-mount installations.
How to Weld and Install Elastimold Apparatus Bushings and Bushing Wells
This guide provides suggested recommendations for welding and outlines critical installation requirements for Elastimold apparatus bushings and bushing wells, focusing on minimizing heat and ensuring proper clearances.
Estimated time: 1h 30m
Tools needed:
TIG welding equipment, MIG welding equipment, Thermocouple detectors, Copper heat sinks
Supplies needed:
No. 308 bare stainless steel wire, Thermally conductive paste, HV insulated caps or connectors, Apparatus bushings, Bushing wells
- Prepare Apparatus and Work Area for Welding
Ensure all apparatus is de-energized before beginning any work. Inspect all components, including bushings, bushing wells, and mating parts, for damage, correct rating, and compatibility. Gather all necessary tools and supplies, maintaining a clean work environment. Remove any protective shipping covers and replace them with appropriate HV insulated caps or connectors if the circuit will be submerged or energized. Verify that the clearance between the epoxy shank and the mounting hole is 3/16” ± 1/16” and that the enclosure cover thickness does not exceed 1/4”.
- Implement Heat Management and Perform Welding
Position copper heat sinks to minimize heat flow to the epoxy, applying thermally conductive paste at the contact faces with the flange and cover. Ensure heat sinks are properly vented. Clean all surfaces (tank, bushing, bushing well) thoroughly to remove any contamination. Use either inert-gas, tungsten-arc (TIG) or short-arc (MIG) welding processes with No. 308 bare stainless steel wire. Keep the welding heat to a minimum; the visible heat line should not exceed 1/8” from the weld or 3/16” from the O.D. of the flange. Monitor temperatures with thermocouple detectors to ensure critical points do not exceed 225°F. Minimize air currents in the welding area and avoid threading heat sinks to the bushing or bushing well stud.
- Complete Post-Welding Procedures and Final Installation Checks
After welding, handle the heated stud and flange carefully to minimize applied forces. If using non-water-cooled heat sinks, remove them promptly and air cool the bushing to prevent heat from flowing back into the epoxy. When making bus bar connections, ensure no torque is applied to the epoxy. Verify that the oil level covering the immersed stud connection is greater than 2 inches. If the equipment requires thermal baking, ensure the bake sequence does not exceed 130°F or 8 hours, and do not mechanically load bushing metallic contacts during this process. Finally, observe all critical clearances from the apparatus connection to enclosure stiffeners and adjacent ground planes.
Frequently Asked Questions about ABB - Installation Products
How are Thomas and Betts products typically installed?
Thomas and Betts products are installed using a variety of methods tailored to specific applications, including the use of flexible cords and cable fittings, non-metallic cable glands, and armored cable fittings. Proper selection of fittings is crucial to match the cable type and installation environment, ensuring durability and preventing physical damage. Tools such as the Blackburn® Comfort Crimp® and HEX-FLEX® systems enhance installation efficiency and reliability, reducing labor time and ensuring secure connections.
What accessories are available for Thomas and Betts products?
Thomas and Betts offers a comprehensive range of accessories for their products, including various cord and cable fittings, non-metallic cable glands, service entrance cable fittings, and armored cable fittings. Their accessories are designed to enhance installation efficiency and ensure compatibility with different cable types and environmental conditions, providing reliable connections for a wide array of applications.
What environmental ratings do Thomas and Betts products have?
Thomas and Betts products feature robust environmental ratings, including NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications, as well as IEC 60529 IP66 protection. These ratings ensure that their products are designed to withstand harsh industrial environments, with capabilities to resist dust, water, and corrosion, and operate effectively in a wide temperature range.
What communication protocols do Thomas and Betts products support?
Thomas and Betts products support a wide range of industrial communication protocols, including Ethernet, DeviceNet, PROFIBUS, Modbus, CANopen, and others. This extensive compatibility ensures seamless integration and reliable communication across various industrial automation systems, catering to diverse application needs.
What are the key features of Thomas and Betts products?
Thomas and Betts products are known for their innovative designs, high performance, and compliance with industry standards such as the National Electrical Code and Underwriters' Laboratories. They offer a comprehensive range of rugged and reliable electrical fittings, including liquidtight and dust-tight connections, which enhance installation efficiency and reduce overall project costs. Their products are engineered for durability in harsh environments, ensuring long-term reliability and lower installed costs.
What are the main product lines offered by Thomas and Betts?
Thomas and Betts offers a comprehensive range of product lines including electrical connectors, cable management systems, grounding and bonding solutions, and industrial automation components. Their products are designed for durability and reliability in demanding industrial environments, ensuring optimal performance and safety across various applications.
What technical support does Thomas and Betts offer?
Thomas and Betts offers comprehensive technical support, including access to field application engineers for onsite training and installation assistance. Their technical support staff is available to address inquiries related to product specifications and installation practices, ensuring optimal performance and safety of electrical systems. Additionally, they provide a variety of training programs to enhance the knowledge and skills of users in the field.
What industries and applications are Thomas and Betts products used for?
Thomas and Betts products are utilized across various industries including electrical construction, industrial automation, telecommunications, and utilities. Their extensive range of cord and cable fittings, electrical boxes, and metal framing systems are designed for applications that require durability and reliability in harsh environments, ensuring optimal performance in both permanent and temporary installations.
What certifications and standards do Thomas and Betts products comply with?
Thomas and Betts products comply with critical international certifications including UL (Underwriters Laboratories), CSA (Canadian Standards Association), and CE (European Community). Our products are designed to meet rigorous industrial standards such as NEMA enclosure ratings and IEC 60529 IP ratings, ensuring safety and reliability across various industrial applications.
What are the main product lines offered by Ocal?
Ocal offers a comprehensive range of corrosion-resistant conduit systems, including PVC-coated conduit and fittings, conduit bodies, hazardous location fittings, and strut accessories. Their products are designed to provide superior corrosion protection, featuring a hot-dipped galvanizing process and UL listed Type 4X PVC-coated conduit bodies, ensuring durability in the most demanding environments.
