Authorized ABB Distributor (Installation Products)
ABB - Installation Products 775J4-U - 900 Amp, 35kV, Deadbreak, 4-Point Junction, Rubber Junction with Stainless Steel Mounting Plate, Back Plane and Adjustable Mounting Bracket.

ABB Installation Products 775J4-U 900 Amp, 35kV, Deadbreak, 4-Point Junction, Rubber Junction with Stainless Steel…

UPC: 783786030491


Documents & Media
Installation InstructionsSpecification SheetManufacturer Product Website

Contact for Pricing

Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.

Overview

The ABB 775J4-U is a 35kV, 900 Amp deadbreak 4-way junction designed for medium-voltage power distribution in demanding electrical infrastructure. This fully shielded, fully submersible molded rubber housing unit meets ANSI/IEEE Standard 386 and provides a secure interface for sectionalizing, looping, tapping, and equipment bypass in subsurface, vault, or padmount applications. The junction features a 100% peroxide-cured EPDM construction with insulation and conductive materials, ensuring long-term reliability and environmental resistance. It is engineered to mate with Elastimold® Elbow connectors (775 series), Bushing Extenders (775BE), and Bushing Adapters (775BEA2), offering compatibility with existing Elastimold® product lines. The 775J4-U includes a stainless steel mounting bracket and back plate for secure installation on flat surfaces, with an adjustable mounting bracket for versatility. Key electrical ratings include 21.1kV phase-to-ground operating voltage, 36.6kV maximum phase-to-phase voltage, 150kV BIL impulse withstand, 50kV AC one-minute withstand, 103kV DC 15-minute withstand, and 26kV AC corona extinction at 3pC sensitivity. The unit supports 900A continuous current and 25kA symmetrical momentary current for 10 cycles. Each kit includes the basic molded junction, mounting hardware, lubricant tubes, installation instructions, and protective caps for safe handling and deployment. Ideal for utility power networks, industrial facilities, and substations requiring dependable medium-voltage power management.
  • 35kV, 900 Amp deadbreak 4-way junction for medium-voltage power distribution
  • Fully shielded, fully submersible molded rubber housing with 100% peroxide-cured EPDM construction
  • Meets ANSI/IEEE Standard 386 with 21.1kV phase-to-ground and 36.6kV phase-to-phase operating voltage
  • Compatible with Elastimold® Elbow connectors, Bushing Extenders, and Bushing Adapters
  • Includes stainless steel mounting bracket and back plate for secure installation

Specifications

Application
Designed for subsurface, vault or padmount applications and can be used for sectionalizing, looping, tapping, and equipment bypass
Connection
Push-In
Connection Type
Deadbreak
Current Rating
900 A
Material
Rubber, Stainless Steel
Material
EPDM-Rubber Housing
Mounting Type
Stainless Steel Mounting Plate, Back Plane, Adjustable Mounting Bracket
Poles
4
Series
775J4
Size
23 inch Long, 6.75 inch Wide, 6.85 inch High
Special Features
Rubber Junction with Stainless Steel Mounting Plate, Back Plane and Adjustable Mounting Bracket
Standard
ANSI/IEEE Standard 386
Temperature Rating, Maximum
149 F
Temperature Rating, Maximum
65 C
Temperature Rating, Minimum
-40 F
Temperature Rating, Minimum
-40 C
Type
Deadbreak 4-Way Junction
Voltage Rating
35000 V
Package Dimensions (L x W x H)
0.01 IN x 0.01 IN x 0.01 IN
Package Dimensions (L x W x H)
0.0254 cm x 0.0254 cm x 0.0254 cm
Package Weight (Imperial)
1.0000 L
Package Weight (Metric)
0.4540 kg
6 Point Junction, with one 600 Amp Bushing Interfaces, four 200 Amp Bushing Well Interface and one 600 Amp Bushing Interface, 25kV, No Tilt Mounting.

J6-622226-25

6 Point Junction, with one 600 Amp Bushing Interfaces, four 200 Amp Bushing Well Interface and one 600 Amp Bushing Interface, 25kV, No Tilt Mounting.
15/25kV 200 Amp, Deadbreak Insulated Cap. Bails are required, and Stainless Steel Junction Bail is Included. Does include a Nylon Vending Rod. CS2075 - for any customer.

K150DR-CS2075

15/25kV 200 Amp, Deadbreak Insulated Cap. Bails are required, and Stainless Steel Junction Bail is Included. Does include a Nylon Vending Rod. CS2075 - for any customer.
4 Point Junction, with four 600 Amp Bushing Interfaces, 35kV, 6-1/2 inch centers. No Tilt Mounting.

J4-6666-35-SV

4 Point Junction, with four 600 Amp Bushing Interfaces, 35kV, 6-1/2 inch centers. No Tilt Mounting.
15/25/35kV 600 Series Spiking Aid Appendage - Contact has an Aluminum Tip for Use with Piercing Tool.

K650SL-CS1887

15/25/35kV 600 Series Spiking Aid Appendage - Contact has an Aluminum Tip for Use with Piercing Tool.
15/25kV 600 Series Deadbreak 4-Point Junction, Hardware package consists of Brackets and Straps only.

K650J4-6

15/25kV 600 Series Deadbreak 4-Point Junction, Hardware package consists of Brackets and Straps only.
4 Point Junction, with one 600 Amp Bushing Interface, one 200 Amp Bushing Well interface and two 600 Amp Bushing Interfaces, 25kV, 6-1/2 inch centers. Tilt Mounting Adapter. No Parking Stand.

J4-6266-25-SV-N-TMA

4 Point Junction, with one 600 Amp Bushing Interface, one 200 Amp Bushing Well interface and two 600 Amp Bushing Interfaces, 25kV, 6-1/2 inch centers. Tilt Mounting Adapter. No Parking Stand.
6 Point Junction, 25kV, two - 200 Amp Bushing Well interfaces, two - 600 Amp Bushing interfaces, two - 200 Amp Bushing Well Interfaces. Tilt Mounting Adapter.

J6-226622-25-TMA

6 Point Junction, 25kV, two - 200 Amp Bushing Well interfaces, two - 600 Amp Bushing interfaces, two - 200 Amp Bushing Well Interfaces. Tilt Mounting Adapter.
15/25kV 600 Series Deadbreak 3-Point Junction, Rubber Junction with stainless steel mounting plate, back plate and adjustable mounting bracket.

K650J3U

15/25kV 600 Series Deadbreak 3-Point Junction, Rubber Junction with stainless steel mounting plate, back plate and adjustable mounting bracket.

Frequently Asked Questions

What is the voltage class of the 775J4 junction?

The 775J4 Deadbreak 4-Way Junction is designed for a 35kV voltage class.

What is the continuous current rating for the 775J4?

The 775J4 Deadbreak 4-Way Junction has a continuous current rating of 900 Amps.

Where can the ELASTIMOLD® junctions be installed?

ELASTIMOLD® junctions are designed for subsurface, vault, or padmount applications.

What is the operating voltage for the 775J4?

The operating voltage is 21.1kV Phase-to-Ground, with a maximum Phase-to-Phase voltage of 36.6kV.

What ELASTIMOLD® products are compatible with this junction?

It is designed to mate with the 775 Elbow Connector, 775BE Bushing Extender, and 775BEA2 Bushing Adapter.

How do I order the 775J4 with "U" style mounting straps?

Add "-5" at the end of the catalog number for junctions with "U" style mounting straps only.

What standard does the 775J4 junction meet?

The 775J4 junction meets ANSI/IEEE Standard 386, Latest Revision.

Where can the ELASTIMOLD® junctions be installed?

ELASTIMOLD® junctions are designed for subsurface, vault, or padmount applications.

How do I order the 775J4 with "U" style mounting straps?

Add "-5" at the end of the catalog number for junctions with "U" style mounting straps only.

What is the operating voltage for the 775J4?

The operating voltage is 21.1kV Phase-to-Ground, with a maximum Phase-to-Phase voltage of 36.6kV.

How to Install the Elastimold LINK-C Deadbreak Cam Link Operable Connector System

This guide provides step-by-step instructions for installing the Elastimold LINK-C 600 amp deadbreak cam link operable connector system. It covers mounting, wiring, and grounding procedures. All apparatus must be de-energized during installation or removal of parts. This product should only be installed by competent personnel trained in good safety practices involving high voltage electrical equipment. Failure to follow instructions will result in damage and serious injury.

Estimated time: 2h

Tools needed:

1-inch hex tool, Torque wrench, Hot stick, 600ATM (Operating Tool), Wire strippers

Supplies needed:

ELASTIMOLD supplied lubricant, #14 AWG or #12 AWG solid copper wire, Appropriate grounding connector, Hardware supplied with alignment bracket (hex bolts, lock washers), Mating 200 amp product, HV insulated cap(s) or connector(s)

  1. Install the 600 Amp Elbow

    Install the 600 amp elbow onto the cable according to the installation instructions supplied with the elbow. Ensure the elbow is positioned to align correctly with the bushing extender or standoff plug during subsequent steps.

  2. Prepare and Install the Bushing Extender

    Clean and thoroughly lubricate the apparatus bushing and both interfaces of the 600 amp bushing extender with ELASTIMOLD supplied lubricant. Install the bushing extender onto the apparatus bushing. Insert the 600ATM into the retainer contact, engage its internal hex broach, and then insert the retainer contact into the bushing extender. Thread it into the apparatus bushing using a 1-inch hex tool, torquing to 50-60 ft-lbs.

  3. Prepare and Install the 600 Amp Elbow onto the Standoff Plug

    Clean and thoroughly lubricate the epoxy standoff plug and both interfaces of the 600 amp elbow with ELASTIMOLD supplied lubricant. Install the elbow onto the epoxy standoff plug. Insert the 600AMT into the retainer contact, engage its internal hex broach, and then insert the retainer contact into the 600 amp elbow through the hole in the compression lug. Thread it into the epoxy standoff plug using a 1-inch hex tool, torquing to 50-60 ft-lbs.

  4. Install the Alignment Bracket

    Remove the bushing extender clamp and elbow clamp from the alignment bracket. Position the alignment bracket on the bushing extender to a dimension of 2.5 inches (63.5mm) from the grounding eye. Assemble the bushing extender clamp to the alignment bracket with the supplied hardware, torquing by alternating sides until the clamp tabs are flush with each other and tight on both sides.

  5. Secure the Elbow to the Alignment Bracket

    Position the elbow in the alignment bracket such that the elbow cuff is lined up evenly with the bushing extender cuff. Assemble the elbow clamp to the alignment bracket with the supplied hardware, torquing by alternating sides until the clamp tabs are flush with each other and tight on both sides. Ensure the elbow clamp notch faces the cable entrance of the elbow.

  6. Install the LINK-C Connector

    Clean and thoroughly lubricate both 600 ampere interfaces of the LINK-C with ELASTIMOLD supplied lubricant. Align the LINK-C such that when inserted into the bushing extender and elbow, it is perpendicular to the switch faceplate. Insert the LINK-C into the bushing extender and elbow, making sure both lever arms are on the inside of the alignment bracket legs. Engage the pivot pin into the slots in the alignment bracket legs. While pushing inward, move the lever arms downward by use of a hot stick eye, thus engaging the roller pin and moving the LINK-C inward. Continue moving lever arms until perpendicular to the alignment bracket leg.

  7. Ground the System and Install Mating Products

    Ground the elbow by feeding a #14 AWG or #12 AWG solid copper wire through the grounding eye on the elbow, twisting it tight, and connecting it to ground. Clean and lubricate the 200 amp interface on the LINK-C. Ground, then install the desired mating product on the 200 amp interface per its installation instructions. Ground the cable: if concentric neutral cable is used, twist the concentric neutral wires together and connect to ground; if 20MA or 21MA grounding devices are used, connect the ground lead to ground. For three-phase installations, tie all grounds from all three phases to a common ground point.

Frequently Asked Questions about ABB - Installation Products

How are Thomas and Betts products typically installed?

Thomas and Betts products are installed using a variety of methods tailored to specific applications, including the use of flexible cords and cable fittings, non-metallic cable glands, and armored cable fittings. Proper selection of fittings is crucial to match the cable type and installation environment, ensuring durability and preventing physical damage. Tools such as the Blackburn® Comfort Crimp® and HEX-FLEX® systems enhance installation efficiency and reliability, reducing labor time and ensuring secure connections.

What accessories are available for Thomas and Betts products?

Thomas and Betts offers a comprehensive range of accessories for their products, including various cord and cable fittings, non-metallic cable glands, service entrance cable fittings, and armored cable fittings. Their accessories are designed to enhance installation efficiency and ensure compatibility with different cable types and environmental conditions, providing reliable connections for a wide array of applications.

What environmental ratings do Thomas and Betts products have?

Thomas and Betts products feature robust environmental ratings, including NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications, as well as IEC 60529 IP66 protection. These ratings ensure that their products are designed to withstand harsh industrial environments, with capabilities to resist dust, water, and corrosion, and operate effectively in a wide temperature range.

What communication protocols do Thomas and Betts products support?

Thomas and Betts products support a wide range of industrial communication protocols, including Ethernet, DeviceNet, PROFIBUS, Modbus, CANopen, and others. This extensive compatibility ensures seamless integration and reliable communication across various industrial automation systems, catering to diverse application needs.

What are the key features of Thomas and Betts products?

Thomas and Betts products are known for their innovative designs, high performance, and compliance with industry standards such as the National Electrical Code and Underwriters' Laboratories. They offer a comprehensive range of rugged and reliable electrical fittings, including liquidtight and dust-tight connections, which enhance installation efficiency and reduce overall project costs. Their products are engineered for durability in harsh environments, ensuring long-term reliability and lower installed costs.

What are the main product lines offered by Thomas and Betts?

Thomas and Betts offers a comprehensive range of product lines including electrical connectors, cable management systems, grounding and bonding solutions, and industrial automation components. Their products are designed for durability and reliability in demanding industrial environments, ensuring optimal performance and safety across various applications.

What technical support does Thomas and Betts offer?

Thomas and Betts offers comprehensive technical support, including access to field application engineers for onsite training and installation assistance. Their technical support staff is available to address inquiries related to product specifications and installation practices, ensuring optimal performance and safety of electrical systems. Additionally, they provide a variety of training programs to enhance the knowledge and skills of users in the field.

What industries and applications are Thomas and Betts products used for?

Thomas and Betts products are utilized across various industries including electrical construction, industrial automation, telecommunications, and utilities. Their extensive range of cord and cable fittings, electrical boxes, and metal framing systems are designed for applications that require durability and reliability in harsh environments, ensuring optimal performance in both permanent and temporary installations.

What certifications and standards do Thomas and Betts products comply with?

Thomas and Betts products comply with critical international certifications including UL (Underwriters Laboratories), CSA (Canadian Standards Association), and CE (European Community). Our products are designed to meet rigorous industrial standards such as NEMA enclosure ratings and IEC 60529 IP ratings, ensuring safety and reliability across various industrial applications.

What are the main product lines offered by Ocal?

Ocal offers a comprehensive range of corrosion-resistant conduit systems, including PVC-coated conduit and fittings, conduit bodies, hazardous location fittings, and strut accessories. Their products are designed to provide superior corrosion protection, featuring a hot-dipped galvanizing process and UL listed Type 4X PVC-coated conduit bodies, ensuring durability in the most demanding environments.