Authorized ABB Distributor (Installation Products)
ABB - Installation Products K675T1 - 900 Amp, Copper, Long Shank Bushing without Stud
More images

ABB Installation Products K675T1 900 Amp, Copper, Long Shank Bushing without Stud

UPC: 783786644445


Documents & Media
Installation InstructionsSpecification SheetManufacturer Product Website

Contact for Pricing

Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.

Overview

This ABB K675T1 is a 900 Amp copper bushing designed for electrical connections. It features a long shank for secure mounting and is supplied without a stud, allowing for flexible installation configurations. Manufactured by ABB Installation Products, this component is suitable for high-current applications where reliable copper conductivity is essential. It is part of ABB's range of electrical connectors and equipment lugs, designed to meet national and local electrical codes. The product is made in the USA.
  • 900 Amp current rating
  • Constructed from copper for excellent conductivity
  • Long shank design for secure installation
  • Supplied without a stud for flexible mounting options
  • Manufactured by ABB Installation Products (SKU: K675T1)

Specifications

Application
900 Amps
Material
Copper
Temperature Rating, Maximum
149 F
Temperature Rating, Maximum
65 C
Temperature Rating, Minimum
-40 F
Temperature Rating, Minimum
-40 C
Type
Long Shank Bushing
Package Dimensions (L x W x H)
0.01 IN x 0.01 IN x 0.01 IN
Package Dimensions (L x W x H)
0.0254 cm x 0.0254 cm x 0.0254 cm
Package Weight (Imperial)
8.8000 L
Package Weight (Metric)
3.9920 kg
900 Amp, 35kV, 600 Series Elbow with Test Point Housing only, with Stud.

776BLR

900 Amp, 35kV, 600 Series Elbow with Test Point Housing only, with Stud.
15kV 600 Series Loadbreak Stick-Op Bushing Adapter, Window OP CA, 600AT assembly tool required for operation and/or installation of Stick-Op.

655BEA3

15kV 600 Series Loadbreak Stick-Op Bushing Adapter, Window OP CA, 600AT assembly tool required for operation and/or installation of Stick-Op.
15/25kV, 900 Amp, Deadbreak, Short Shank Bushing for In-Oil and SF6 Applications (Pad-Mounted or Vault-Type or Submersible Transformers or Switchgear). One Factory installed 5/8-11 UNC-2A Stud included, other Stud must be Purchased Separately. Overall Length 8.12 inch, Diameter 4.50 inch. Molded Epoxy with Stainless Steel Flange.

K675S1

15/25kV, 900 Amp, Deadbreak, Short Shank Bushing for In-Oil and SF6 Applications (Pad-Mounted or Vault-Type or Submersible Transformers or Switchgear). One Factory installed 5/8-11 UNC-2A Stud included, other Stud must be Purchased Separately. Overall Length 8.12 inch, Diameter 4.50 inch. Molded Epoxy with Stainless Steel Flange.
15/25KV, Molded Epoxy Flange for gasketed clamp mounting only, with Replaceable Well Stud, Bushing Well

K1601PCC-R

15/25KV, Molded Epoxy Flange for gasketed clamp mounting only, with Replaceable Well Stud, Bushing Well
15/25kV, 600 Amp, Deadbreak Bushing for In-Air Applications (Pad-Mounted or Vault-Type or Submersible Transformers or Switchgear). One Factory installed 5/8-11 UNC-2A Stud included, other Stud must be Purchased Separately. Overall Length 13.75 inch, Diameter 4.50 inch. Molded Epoxy with Stainless Steel Flange. Includes Boot and Collar.

K650TBC

15/25kV, 600 Amp, Deadbreak Bushing for In-Air Applications (Pad-Mounted or Vault-Type or Submersible Transformers or Switchgear). One Factory installed 5/8-11 UNC-2A Stud included, other Stud must be Purchased Separately. Overall Length 13.75 inch, Diameter 4.50 inch. Molded Epoxy with Stainless Steel Flange. Includes Boot and Collar.
15/25kv, Short Shank Well without Bail Tabs and with Replaceable Well Stud (2-3/4 inch Bushing Shank Length)

K1601-PC-S2R

15/25kv, Short Shank Well without Bail Tabs and with Replaceable Well Stud (2-3/4 inch Bushing Shank Length)
15/25kv, Short Shank Well without Bail Tabs and Non-Replaceable Well Stud (2-3/4 inch Bushing Shank Length), side mount

K1601-PC-S2

15/25kv, Short Shank Well without Bail Tabs and Non-Replaceable Well Stud (2-3/4 inch Bushing Shank Length), side mount
Boot and Collars for K600T1, designed for In-Air Applications of 15 or 25 kV, 600/900 Amp Apparatus Bushings.

600-BC

Boot and Collars for K600T1, designed for In-Air Applications of 15 or 25 kV, 600/900 Amp Apparatus Bushings.

Frequently Asked Questions

What are the typical applications for the K675T1 bushing?

The K675T1 bushing is typically used in pad-mounted, vault-type, and submersible transformers, as well as switchgear. It is designed for direct mounting in electrical apparatus on 600-Amp systems up to 25kV.

What is the impulse withstand rating for the bushing?

The bushing has a 125kV BIL impulse withstand rating (1.2 x 50 microsecond wave).

Can the K675T1 be used for 900 Amp applications?

Yes, the K675T1 can be used for 900 Amp applications, but the entire arrangement, including cable, lug, and bushing, must be all copper only.

Does the K675T1 bushing meet industry standards?

Yes, the K675T1 bushing meets ANSI/IEEE Standard 386, Latest Revision, and its interface meets ANSI/IEEE 386 dimensional criteria.

What is the corona extinction voltage for the bushing?

The corona extinction voltage for the bushing is 19kV AC at 3pC sensitivity.

What is the AC one-minute withstand voltage?

The AC one-minute withstand voltage rating for the bushing is 40kV.

What is the continuous current rating for the K675T1?

The K675T1 bushing has a continuous current rating of 600 Amps.

What is the voltage class of the K675T1 bushing?

The K675T1 bushing has a 25kV Voltage Class and meets ANSI/IEEE Standard 386.

What type of connection does the K675T1 model use?

The K675T1 model specifically uses an all copper threaded connection to the apparatus.

What material is the K675T1 bushing made from?

The K675T1 bushing is molded of epoxy and features a stainless steel flange. It also has a conductive rubber shield at the mating surface.

How to Weld ELASTIMOLD Apparatus Bushings and Bushing Wells

This guide provides recommended procedures and critical requirements for welding ELASTIMOLD apparatus bushings and bushing wells, focusing on minimizing heat to preserve epoxy integrity and ensuring proper installation for safe operation.

Estimated time: 1h 30m

Tools needed:

Inert-gas, tungsten-arc welding (TIG) equipment, Short-arc welding (MIG) equipment, Thermocouple detectors

Supplies needed:

No. 308 bare stainless steel wire, Copper heat sinks, Thermally conductive paste, HV insulated caps or connectors, Oil

  1. Prepare Apparatus and Work Area

    De-energize all apparatus before beginning any work. Inspect all parts for damage, correct rating, and compatibility with mating components. Verify that the package contents are complete and undamaged, and ensure proper fit of components with cables and mating products. If the product is supplied with protective shipping covers, remove them and replace with appropriate HV insulated caps or connectors before submerging or energizing the circuit. Confirm the clearance between the epoxy shank and the mounting hole is 3/16” ± 1/16”, and verify the enclosure cover thickness does not exceed 1/4”. Ensure all surfaces (tank, bushing, bushing well) are thoroughly clean and free of contaminants like paint or grease. Minimize air currents in the welding area to prevent disturbance of the gas atmosphere.

  2. Set Up Heat Sinks

    Obtain copper heat sinks, ensuring the bottom heat sink is of a larger diameter than the top to absorb more heat and prevent it from flowing into the tank. Apply thermally conductive paste to the faces of the heat sinks that will be in contact with the flange and cover. Position the heat sinks to effectively minimize heat flow to the epoxy. Provide adequate venting for the heat sinks. Do not thread heat sinks to the bushing or bushing well stud, as expansion due to heat may affect the integrity of these parts.

  3. Perform Welding

    Use either Inert-gas, tungsten-arc welding (TIG) or Short-arc welding (metal inert-gas, MIG) processes, as both are fast and create minimum heat. Utilize No. 308 bare stainless steel wire for welding. Maintain minimum heat during welding; the visible heat line should not exceed 1/8” from the weld or 3/16” from the O.D. of the flange. Monitor temperatures at critical points using thermocouple detectors to ensure they do not exceed 225°F.

  4. Post-Welding Cooling and Handling

    Carefully handle the heated stud and flange immediately after welding to minimize any applied forces. If using non-water cooled heat sinks, remove them promptly after welding to prevent heat from flowing back into the bushing. Air cool the bushing after removing the heat sinks.

  5. Finalize Installation and Operational Checks

    Ensure no torque is applied to the epoxy when making any bus bar connections. Verify that the oil level covering the immersed stud connection is greater than 2 inches. If the equipment requires thermal baking for surface finishes, ensure the bake sequence does not exceed 130°F or 8 hours. During this cure process, the bushing metallic contacts should not be mechanically loaded internally or externally to prevent epoxy distortion. Note that ELASTIMOLD bushings are not designed for use in air, except for the 600T1 with boots and collars.

Frequently Asked Questions about ABB - Installation Products

How are Thomas and Betts products typically installed?

Thomas and Betts products are installed using a variety of methods tailored to specific applications, including the use of flexible cords and cable fittings, non-metallic cable glands, and armored cable fittings. Proper selection of fittings is crucial to match the cable type and installation environment, ensuring durability and preventing physical damage. Tools such as the Blackburn® Comfort Crimp® and HEX-FLEX® systems enhance installation efficiency and reliability, reducing labor time and ensuring secure connections.

What accessories are available for Thomas and Betts products?

Thomas and Betts offers a comprehensive range of accessories for their products, including various cord and cable fittings, non-metallic cable glands, service entrance cable fittings, and armored cable fittings. Their accessories are designed to enhance installation efficiency and ensure compatibility with different cable types and environmental conditions, providing reliable connections for a wide array of applications.

What environmental ratings do Thomas and Betts products have?

Thomas and Betts products feature robust environmental ratings, including NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications, as well as IEC 60529 IP66 protection. These ratings ensure that their products are designed to withstand harsh industrial environments, with capabilities to resist dust, water, and corrosion, and operate effectively in a wide temperature range.

What communication protocols do Thomas and Betts products support?

Thomas and Betts products support a wide range of industrial communication protocols, including Ethernet, DeviceNet, PROFIBUS, Modbus, CANopen, and others. This extensive compatibility ensures seamless integration and reliable communication across various industrial automation systems, catering to diverse application needs.

What are the key features of Thomas and Betts products?

Thomas and Betts products are known for their innovative designs, high performance, and compliance with industry standards such as the National Electrical Code and Underwriters' Laboratories. They offer a comprehensive range of rugged and reliable electrical fittings, including liquidtight and dust-tight connections, which enhance installation efficiency and reduce overall project costs. Their products are engineered for durability in harsh environments, ensuring long-term reliability and lower installed costs.

What are the main product lines offered by Thomas and Betts?

Thomas and Betts offers a comprehensive range of product lines including electrical connectors, cable management systems, grounding and bonding solutions, and industrial automation components. Their products are designed for durability and reliability in demanding industrial environments, ensuring optimal performance and safety across various applications.

What technical support does Thomas and Betts offer?

Thomas and Betts offers comprehensive technical support, including access to field application engineers for onsite training and installation assistance. Their technical support staff is available to address inquiries related to product specifications and installation practices, ensuring optimal performance and safety of electrical systems. Additionally, they provide a variety of training programs to enhance the knowledge and skills of users in the field.

What industries and applications are Thomas and Betts products used for?

Thomas and Betts products are utilized across various industries including electrical construction, industrial automation, telecommunications, and utilities. Their extensive range of cord and cable fittings, electrical boxes, and metal framing systems are designed for applications that require durability and reliability in harsh environments, ensuring optimal performance in both permanent and temporary installations.

What certifications and standards do Thomas and Betts products comply with?

Thomas and Betts products comply with critical international certifications including UL (Underwriters Laboratories), CSA (Canadian Standards Association), and CE (European Community). Our products are designed to meet rigorous industrial standards such as NEMA enclosure ratings and IEC 60529 IP ratings, ensuring safety and reliability across various industrial applications.

What are the main product lines offered by Ocal?

Ocal offers a comprehensive range of corrosion-resistant conduit systems, including PVC-coated conduit and fittings, conduit bodies, hazardous location fittings, and strut accessories. Their products are designed to provide superior corrosion protection, featuring a hot-dipped galvanizing process and UL listed Type 4X PVC-coated conduit bodies, ensuring durability in the most demanding environments.