ABB Installation Products 655BEA3 15kV 600 Series Loadbreak Stick-Op Bushing Adapter, Window OP CA, 600AT assembly tool…
UPC: 783786374205
Contact for Pricing
Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.
Overview
- 15kV rated for medium-voltage applications
- Loadbreak functionality with window-operated mechanism
- Compatible with 600AT assembly tool for operation/installation
- Part of ABB Installation Products line
- Designed for safe electrical switching and maintenance
Specifications
Application | Mates with a 600 Amp bushing interface and provides a 200 Amp loadbreak tap. An access hole thru the bore of the reducing tap plug allows use of a 600AT operating tool to bolt and secure the component to a mating 600 Amp bushing apparatus |
Material | EPDM-Rubber |
Size | 3.10 inch (78.7 mm) Diameter |
Special Features | 15Kv Tap, 200 Amp Loadbreak RatedIncludes hex-broach for torque installation. Peroxide-cured insulation and jacket. All copper current path. Constructed of EPDM molded rubber. Converts a 650 series Bushing Interface to a 200 Amp Loadbreak Interface |
Standard | ANSI/IEEE Standard 386 |
Type | Bushing Adapter |
Package Dimensions (L x W x H) | 0.01 IN x 0.01 IN x 0.01 IN |
Package Dimensions (L x W x H) | 0.0254 cm x 0.0254 cm x 0.0254 cm |
Package Weight (Imperial) | 4.3300 L |
Package Weight (Metric) | 1.9640 kg |
K675TBC
15/25kV, 900 Amp, Deadbreak Bushing for In-Air Applications (Pad-Mounted or Vault-Type or Submersible Transformers or Switchgear). One Factory installed 5/8-11 UNC-2A Stud included, other Stud must be Purchased Separately. Overall Length 13.75 inch, Diameter 4.50 inch. Molded Epoxy with Stainless Steel Flange. Boot and Collar.
K1601PCC-R
15/25KV, Molded Epoxy Flange for gasketed clamp mounting only, with Replaceable Well Stud, Bushing WellK650TBC
15/25kV, 600 Amp, Deadbreak Bushing for In-Air Applications (Pad-Mounted or Vault-Type or Submersible Transformers or Switchgear). One Factory installed 5/8-11 UNC-2A Stud included, other Stud must be Purchased Separately. Overall Length 13.75 inch, Diameter 4.50 inch. Molded Epoxy with Stainless Steel Flange. Includes Boot and Collar.
K1601-PC-S2R
15/25kv, Short Shank Well without Bail Tabs and with Replaceable Well Stud (2-3/4 inch Bushing Shank Length)
K1601-PC-S2
15/25kv, Short Shank Well without Bail Tabs and Non-Replaceable Well Stud (2-3/4 inch Bushing Shank Length), side mountFrequently Asked Questions
What tool is required to operate the 655BEA3?
A 600AT assembly tool is required for operation and installation of the 655BEA3.
What voltage rating does the 655BEA3 support?
The 655BEA3 supports a 15kV voltage rating for medium-voltage applications.
Is the 655BEA3 compatible with loadbreak bushings?
Yes, the 655BEA3 is designed for use with loadbreak bushings in medium-voltage systems.
What is the Window OP CA feature?
The Window OP CA feature allows for window-operated loadbreak operations using the 600AT assembly tool.
How to Install the LINK-C Deadbreak Cam Link Operable Connector System
This guide provides step-by-step instructions for the safe installation and initial setup of the LINK-C 600 amp deadbreak cam link operable connector system, including mounting and wiring procedures. Ensure all apparatus are de-energized before beginning.
Estimated time: 1h 30m
Tools needed:
Torque wrench, Socket wrench (with 1 inch socket), Hot stick, Measuring tape or ruler, Wrench or socket for hex bolts, Welding equipment (if applicable), Wire strippers, 600ATM tool, 600AMT tool
Supplies needed:
600 amp elbow, Cable, 3/8-16 x 2 inch studs, Hex nuts, Lockwashers, Stand-off plug (SOP), Spacers (optional, not supplied), ELASTIMOLD supplied lubricant, 600 amp bushing extender, Retainer contact, Epoxy standoff plug, Alignment bracket, Bushing extender clamp, Elbow clamp, Hex bolts, LINK connector, #14 AWG or #12 AWG solid copper wire, Appropriate ground connectors, Mating 200 amp product (e.g., insulated cap, loadbreak elbow, elbow surge arrester), 20MA or 21MA grounding devices (optional)
- Prepare for Installation and Ensure Safety
Before beginning, ensure all apparatus are de-energized to prevent serious injury or fatality. Inspect all package contents and components for completeness, damage, and compatibility with mating parts. Gather all required tools and maintain a clean work area throughout the procedure. This product must be installed only by competent personnel trained in high voltage electrical equipment safety practices.
- Install the 600 Amp Elbow
Install the 600 amp elbow onto the cable according to the specific installation instructions provided with the elbow. Ensure the elbow is positioned to align correctly with the stand-off plug.
- Mount the Stand-Off Plug (If Applicable)
If using a mounted stand-off plug, weld three 3/8-16 x 2 inch studs to the equipment faceplate according to customer standard practice and specified dimensions. Install three hex nuts onto the studs to support the stand-off plug, ensuring it aligns with the apparatus bushing. Place the stand-off plug over the studs, resting on the nuts or optional spacers. Secure the stand-off plug by installing a lockwasher and hex nut on each stud, then tighten to 12 foot-lbs torque. Verify that the top surfaces of the apparatus bushing and stand-off plug are in-line; adjust nuts as needed.
- Install Bushing Extender and Elbow Components
Clean and thoroughly lubricate the apparatus bushing and both interfaces of the 600 amp bushing extender using ELASTIMOLD supplied lubricant. Install the bushing extender onto the apparatus bushing. Insert the 600ATM tool into the retainer contact, engage the internal hex broach, and then insert the retainer contact into the bushing extender. Thread it into the apparatus bushing using a suitable tool on the 1 inch hex portion of the 600ATM, torquing to 50-60 ft-lbs. Similarly, clean and lubricate the epoxy standoff plug and both interfaces of the 600 amp elbow. Install the elbow onto the epoxy standoff plug, insert the 600AMT tool into the retainer contact, and thread it into the epoxy standoff plug through the compression lug, torquing to 50-60 ft-lbs.
- Install the Alignment Bracket
Remove the bushing extender clamp and elbow clamp from the alignment bracket. Position the alignment bracket on the bushing extender, measuring 2.5 inches (63.5mm) from the grounding eye. Assemble the bushing extender clamp to the alignment bracket with the supplied hardware, torquing by alternating sides until the clamp tabs are flush and tight. Next, position the elbow within the alignment bracket, ensuring the elbow cuff aligns evenly with the bushing extender cuff. Assemble the elbow clamp to the alignment bracket with the supplied hardware, torquing by alternating sides until the clamp tabs are flush and tight. Ensure the elbow clamp notch faces the cable entrance of the elbow.
- Install the LINK Connector
Clean and thoroughly lubricate both 600 ampere interfaces of the LINK with ELASTIMOLD supplied lubricant. Align the LINK so it is perpendicular to the switch faceplate when inserted into the bushing extender and elbow. Insert the LINK, ensuring both lever arms are inside the alignment bracket legs. Engage the pivot pin into the slots of the alignment bracket legs. Using a hot stick eye, push inward and move the lever arms downward to engage the roller pin and move the LINK inward. Continue moving the lever arms until they are perpendicular to the alignment bracket leg.
- Ground the System and Install Mating Products
Ground the elbow by feeding a #14 AWG or #12 AWG solid copper wire through its grounding eye, twisting it tight, and connecting it to ground. Clean and lubricate the 200 amp interface on the LINK. Ground and then install the desired mating product (e.g., insulated cap, loadbreak elbow, or surge arrester) onto the 200 amp interface according to its specific installation instructions. Finally, ensure the cable is properly grounded: for concentric neutral cable, twist the neutral wires together and connect to ground; for 20MA or 21MA devices, connect their ground lead to ground. For three-phase installations, tie all grounds from all three phases to a common ground point.
Frequently Asked Questions about ABB - Installation Products
How are Thomas and Betts products typically installed?
Thomas and Betts products are installed using a variety of methods tailored to specific applications, including the use of flexible cords and cable fittings, non-metallic cable glands, and armored cable fittings. Proper selection of fittings is crucial to match the cable type and installation environment, ensuring durability and preventing physical damage. Tools such as the Blackburn® Comfort Crimp® and HEX-FLEX® systems enhance installation efficiency and reliability, reducing labor time and ensuring secure connections.
What accessories are available for Thomas and Betts products?
Thomas and Betts offers a comprehensive range of accessories for their products, including various cord and cable fittings, non-metallic cable glands, service entrance cable fittings, and armored cable fittings. Their accessories are designed to enhance installation efficiency and ensure compatibility with different cable types and environmental conditions, providing reliable connections for a wide array of applications.
What environmental ratings do Thomas and Betts products have?
Thomas and Betts products feature robust environmental ratings, including NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications, as well as IEC 60529 IP66 protection. These ratings ensure that their products are designed to withstand harsh industrial environments, with capabilities to resist dust, water, and corrosion, and operate effectively in a wide temperature range.
What communication protocols do Thomas and Betts products support?
Thomas and Betts products support a wide range of industrial communication protocols, including Ethernet, DeviceNet, PROFIBUS, Modbus, CANopen, and others. This extensive compatibility ensures seamless integration and reliable communication across various industrial automation systems, catering to diverse application needs.
What are the key features of Thomas and Betts products?
Thomas and Betts products are known for their innovative designs, high performance, and compliance with industry standards such as the National Electrical Code and Underwriters' Laboratories. They offer a comprehensive range of rugged and reliable electrical fittings, including liquidtight and dust-tight connections, which enhance installation efficiency and reduce overall project costs. Their products are engineered for durability in harsh environments, ensuring long-term reliability and lower installed costs.
What are the main product lines offered by Thomas and Betts?
Thomas and Betts offers a comprehensive range of product lines including electrical connectors, cable management systems, grounding and bonding solutions, and industrial automation components. Their products are designed for durability and reliability in demanding industrial environments, ensuring optimal performance and safety across various applications.
What technical support does Thomas and Betts offer?
Thomas and Betts offers comprehensive technical support, including access to field application engineers for onsite training and installation assistance. Their technical support staff is available to address inquiries related to product specifications and installation practices, ensuring optimal performance and safety of electrical systems. Additionally, they provide a variety of training programs to enhance the knowledge and skills of users in the field.
What industries and applications are Thomas and Betts products used for?
Thomas and Betts products are utilized across various industries including electrical construction, industrial automation, telecommunications, and utilities. Their extensive range of cord and cable fittings, electrical boxes, and metal framing systems are designed for applications that require durability and reliability in harsh environments, ensuring optimal performance in both permanent and temporary installations.
What certifications and standards do Thomas and Betts products comply with?
Thomas and Betts products comply with critical international certifications including UL (Underwriters Laboratories), CSA (Canadian Standards Association), and CE (European Community). Our products are designed to meet rigorous industrial standards such as NEMA enclosure ratings and IEC 60529 IP ratings, ensuring safety and reliability across various industrial applications.
What are the main product lines offered by Ocal?
Ocal offers a comprehensive range of corrosion-resistant conduit systems, including PVC-coated conduit and fittings, conduit bodies, hazardous location fittings, and strut accessories. Their products are designed to provide superior corrosion protection, featuring a hot-dipped galvanizing process and UL listed Type 4X PVC-coated conduit bodies, ensuring durability in the most demanding environments.