ABB Installation Products K675ETPSP 900 Amp, 25kV, Test and Ground Connector Kit, Elbow Tap Plug, with Factory Assembled Stud.
UPC: 783786622153
Contact for Pricing
Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.
Overview
- 25kV phase-to-phase, 15.2kV phase-to-ground rated for medium-voltage applications
- 900 Amp continuous current with 200 Amp loadbreak interface
- Meets ANSI/IEEE Standard 386 with 125kV BIL impulse withstand rating
- Includes seating indicator for visual installation confirmation and vents to prevent partial vacuum
- Factory-assembled stud for simplified installation; compatible with multiple Elastimold connectors
Specifications
Application | 25 kV, 900 Amps |
Material | Copper |
Temperature Rating, Maximum | 149 F |
Temperature Rating, Maximum | 65 C |
Temperature Rating, Minimum | -40 F |
Temperature Rating, Minimum | -40 C |
Type | Test / Ground Connector Kit |
Package Dimensions (L x W x H) | 0.01 IN x 0.01 IN x 0.01 IN |
Package Dimensions (L x W x H) | 0.0254 cm x 0.0254 cm x 0.0254 cm |
Package Weight (Imperial) | 0.0010 L |
Package Weight (Metric) | 0.0010 kg |
K675S1-CS2114
25 kV, 900 Amps, Short Shank Bushing with Stud, Apparatus Bushing, Tin Plated Copper Contact, Includes Instruction Sheet. CS2114 - for any customer
K656DRSP
600 Amp, 15/25kV, 600 Series Deadbreak Insulated Cap with Test Point (with Stud). Factory Assembled Stud which is not field removable.
Frequently Asked Questions
What products are compatible with the K675ETP?
The K675ETP mates with products such as K675BLR, K675BE, 273DR, 273DRG, 273ESA-XX, 275LR, 275LRJS, 273ELR, 273RLR, 273DLR, 273DELR, and 370GLR.
What is included in the K675ETP kit?
Each kit contains one Elbow Tap Plug K675ETP, one protective shipping cap 2701-41, two lubricants 82-08, and one Installation Instruction IS-0773.
What is the impulse withstand (BIL) rating?
The K675ETP has a 125kV BIL impulse withstand rating. This is based on a 1.2 x 50 microsecond wave.
What is the continuous current rating for the deadbreak interface?
The deadbreak interface is rated for 900 Amps continuous. It also has a 25kA Sym 10 Cycle Momentary rating.
What is the continuous current rating for the loadbreak interface?
The loadbreak interface is rated for 200 Amps continuous and loadbreak operation. It also has a 10kA Sym 10 Cycle Momentary & Fault Close rating.
What ANSI/IEEE standard does the K675ETP meet?
The K675ETP meets ANSI/IEEE Standard 386, Latest Revision. This ensures compliance with industry standards.
What is the maximum operating voltage for the K675ETP?
The maximum phase-to-ground operating voltage for the 25kV voltage class is 15.2kV. The maximum phase-to-phase voltage is 26.3kV.
What assembly tool is required for installation?
The K675ETP is installed using the 600ATM assembly tool. This tool is necessary for proper installation.
What is the primary function of the K675ETP?
The K675ETP elbow tap plug allows a 200 Amp tap from a mating 900 Amp connector. It is a 25kV Loadbreak Elbow Tap Plug.
What products are compatible with the K675ETP?
The K675ETP mates with products such as K675BLR, K675BE, 273DR, 273DRG, 273ESA-XX, 275LR, 275LRJS, 273ELR, 273RLR, 273DLR, 273DELR, and 370GLR.
How to Install the K650/675 ETP Elbow Tap Plug
This guide provides step-by-step instructions for the safe and proper installation of the K650/675 ETP Elbow Tap Plug, designed for 25kV systems to provide a 200 ampere loadbreak tap. Ensure all safety warnings are observed.
Estimated time: 1h 30m
Tools needed:
Torque wrench, Wire strippers, Screwdriver
Supplies needed:
Tap Plug, Lubricant (supplied or ELASTIMOLD approved), Double-ended stud (if applicable), #14AWG copper wire (or equivalent), Appropriate grounding connector, Waterproofing material, DR(G), ESA, GLR, or LR (appropriate voltage class)
- Prepare Cable and Install Elbow Connector
DANGER: All apparatus must be de-energized during installation. Prepare the cable using a spade contact and install the elbow connector as described in the (K)650LR or 750LR installation instructions. Before making the first crimp on the spade contact, align it on the cable so that the spade lies flat on the apparatus bushing contact.
- Prepare Tap Plug and Connector Interfaces
Remove the protective caps from the elbow connector and the tap plug. Finger tighten the double-ended stud (if applicable) into the tap plug. Clean and then lubricate the entire mating connector interface, elbow connector interfaces, and the tap plug with the supplied lubricant or an ELASTIMOLD approved lubricant.
- Assemble Elbow and Tap Plug to Mating Connector
Assemble the elbow connector onto the mating connector. Assemble the tap plug into the elbow connector. Insert the drive adapter into the tap plug. Turn the drive adapter in a clockwise direction while simultaneously pushing the elbow and tap plug toward the mating connector. Continue to rotate the drive adapter clockwise with an appropriate torque wrench to a torque of 50-60 ft-lbs. Remove the drive adapter from the tap plug.
- Install Grounding Eye Wire
Insert one end of a length of #14AWG copper wire (or equivalent) through the grounding eye of the elbow, leaving sufficient length to allow movement of the elbow if required. Make a small loop and twist tightly, taking care not to damage the eye.
- Connect Cable Shield and Grounding Eye Wire to Ground
For concentric wire shielded cable: Twist the shield wires together and connect them and the grounding eye wire to ground using an appropriate connector. For metallic tape shielded cable: Connect the metallic shield of the cable to ground using a jumper of equivalent ampacity to the metallic shield, and connect the elbow connector grounding eye wire to ground. In both cases, leave sufficient length for movement, and for three-phase installations, tie all grounds from all three phases to a common ground point. If the cable is jacketed, install appropriate waterproofing at the jacket terminus to prevent moisture from entering.
- Install Insulated Cap or Connector
Clean and lubricate the entire tap plug interface and either a DR(G), ESA, GLR, or LR of the appropriate voltage class with the supplied lubricant or ELASTIMOLD approved lubricant. Install the DR(G), ESA, GLR, or the LR to the tap plug interface following the instructions supplied with each of these products.
- Verify Seating Indication
Complete assembly of an insulated cap or elbow is indicated by no portion of the yellow seating indicator being visible when viewed from the side. Ensure full seating for proper operation.
Frequently Asked Questions about ABB - Installation Products
How are Thomas and Betts products typically installed?
Thomas and Betts products are installed using a variety of methods tailored to specific applications, including the use of flexible cords and cable fittings, non-metallic cable glands, and armored cable fittings. Proper selection of fittings is crucial to match the cable type and installation environment, ensuring durability and preventing physical damage. Tools such as the Blackburn® Comfort Crimp® and HEX-FLEX® systems enhance installation efficiency and reliability, reducing labor time and ensuring secure connections.
What accessories are available for Thomas and Betts products?
Thomas and Betts offers a comprehensive range of accessories for their products, including various cord and cable fittings, non-metallic cable glands, service entrance cable fittings, and armored cable fittings. Their accessories are designed to enhance installation efficiency and ensure compatibility with different cable types and environmental conditions, providing reliable connections for a wide array of applications.
What environmental ratings do Thomas and Betts products have?
Thomas and Betts products feature robust environmental ratings, including NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications, as well as IEC 60529 IP66 protection. These ratings ensure that their products are designed to withstand harsh industrial environments, with capabilities to resist dust, water, and corrosion, and operate effectively in a wide temperature range.
What communication protocols do Thomas and Betts products support?
Thomas and Betts products support a wide range of industrial communication protocols, including Ethernet, DeviceNet, PROFIBUS, Modbus, CANopen, and others. This extensive compatibility ensures seamless integration and reliable communication across various industrial automation systems, catering to diverse application needs.
What are the key features of Thomas and Betts products?
Thomas and Betts products are known for their innovative designs, high performance, and compliance with industry standards such as the National Electrical Code and Underwriters' Laboratories. They offer a comprehensive range of rugged and reliable electrical fittings, including liquidtight and dust-tight connections, which enhance installation efficiency and reduce overall project costs. Their products are engineered for durability in harsh environments, ensuring long-term reliability and lower installed costs.
What are the main product lines offered by Thomas and Betts?
Thomas and Betts offers a comprehensive range of product lines including electrical connectors, cable management systems, grounding and bonding solutions, and industrial automation components. Their products are designed for durability and reliability in demanding industrial environments, ensuring optimal performance and safety across various applications.
What technical support does Thomas and Betts offer?
Thomas and Betts offers comprehensive technical support, including access to field application engineers for onsite training and installation assistance. Their technical support staff is available to address inquiries related to product specifications and installation practices, ensuring optimal performance and safety of electrical systems. Additionally, they provide a variety of training programs to enhance the knowledge and skills of users in the field.
What industries and applications are Thomas and Betts products used for?
Thomas and Betts products are utilized across various industries including electrical construction, industrial automation, telecommunications, and utilities. Their extensive range of cord and cable fittings, electrical boxes, and metal framing systems are designed for applications that require durability and reliability in harsh environments, ensuring optimal performance in both permanent and temporary installations.
What certifications and standards do Thomas and Betts products comply with?
Thomas and Betts products comply with critical international certifications including UL (Underwriters Laboratories), CSA (Canadian Standards Association), and CE (European Community). Our products are designed to meet rigorous industrial standards such as NEMA enclosure ratings and IEC 60529 IP ratings, ensuring safety and reliability across various industrial applications.
What are the main product lines offered by Ocal?
Ocal offers a comprehensive range of corrosion-resistant conduit systems, including PVC-coated conduit and fittings, conduit bodies, hazardous location fittings, and strut accessories. Their products are designed to provide superior corrosion protection, featuring a hot-dipped galvanizing process and UL listed Type 4X PVC-coated conduit bodies, ensuring durability in the most demanding environments.