
ABB Installation Products K656CY-H0270 15-25kV 600 Series Deadbreak Separable Wye Joint Package (3-Way) with Test Point, Cable…
UPC: 783786329731
Contact for Pricing
Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.
Overview
- 15-25kV voltage rating
- 600 Series Deadbreak Separable Wye Joint (3-Way)
- Includes test point for diagnostics
- Accommodates cable insulation diameter 0.850" - 1.050"
- Aluminum compression lug for conductor connection
Specifications
Amperage Rating | 600 A |
Application | Compact Design is suitable for small vaults and manholes |
Color | Black |
Conductor Range | 4/0 STR/COMPR AWG , 250 kcmil |
Connection | Compression |
Connection Type | Deadbreak Separable Wye Joint |
Current Rating | 600 A |
Environmental Conditions | All Weather Conditions |
Insulation | True |
Length | 37.27 in |
Length | 946.658 mm |
Material | Aluminum |
Material | Housing - EPDM-Rubber |
Poles | 3-Way |
Series | 600 Series |
Size | Cable Insulation Diameter 0.850 inch to 1.050 inch |
Special Features | Fully Shielded, Fully Submersible, 100 Percent Peroxide Cured EPDM Molded Rubber |
Standard | ANSI/IEEE Standard 386 |
Temperature Rating, Maximum | 149 F |
Temperature Rating, Maximum | 65 C |
Temperature Rating, Minimum | -40 F |
Temperature Rating, Minimum | -40 C |
Type | Deadbreak Separable Wye Joint |
Voltage Rating | 15 to 25 kV |
Voltage Rating | 15-25 kV |
Width | 8.12 in |
Width | 206.248 mm |
Package Dimensions (L x W x H) | 0.01 IN x 0.01 IN x 0.01 IN |
Package Dimensions (L x W x H) | 0.0254 cm x 0.0254 cm x 0.0254 cm |
Package Weight (Imperial) | 26.0000 L |
Package Weight (Metric) | 11.7940 kg |

K151SP-C0270
15/25kV 200 Amp, Deadbreak Straight Plug, Bails are required, but not included, order separately. Cable Insulation Diameter 0.805 inch to 1.060 inch. Aluminum Compression Lug. Conductor Size AWG Compressed Stranded 4/0 /Solid 250 /mmSquared 126.67.
K656I-K0330
15-25kV 600 Series Deadbreak Separable Straight Joint Package (2-Way) with Test Point. Aluminum Compression Lug. Cable Insulation Diameter 1.090 inch to 1.310 inch. Conductor Size AWG or kcmil, Compressed Stranded 500 /Compacted Solid 600 /mmSquared Compact 250/300.
K655YSR-K0280
600 Amp, 15-25kV, 600 Series Deadbreak Straight Receptacle. Cable Insulation Diameter 1.090 inch to 1.310 inch. Aluminum Compression Lug. Conductor Size AWG or kcmil, Compressed Stranded 250 /Compacted Solid 300.
K656I-P0410-P0410
15-25kV 600 Series Deadbreak Separable Straight Joint Package (2-Way) with Test Point. 2 X (Aluminum Compression Lug. Cable Insulation Diameter 1.725 inch to 1.935 inch. Conductor Size AWG or kcmil, Compressed Stranded 1000. )
K656CY-G0240
15-25kV 600 Series Deadbreak Separable Wye Joint Package (3-Way) with Test Point, Cable Insulation Diameter 0.760 inch to 0.950 inch. Aluminum Compression Lug. Conductor Size AWG or kcmil, Compressed Stranded 1/0 /Compacted Solid 2/0.
K656I-K0270
15-25kV 600 Series Deadbreak Separable Straight Joint Package (2-Way) with Test Point. Aluminum Compression Lug. Cable Insulation Diameter 1.090 inch to 1.310 inch. Conductor Size AWG or kcmil, Compressed Stranded 4/0 /Compacted Solid 250 /mmSquared Compact 125.
K656CY-L0330
15-25kV 600 Series Deadbreak Separable Wye Joint Package (3-Way) with Test Point, Cable Insulation Diameter 1.180 inch to 1.465 inch. Aluminum Compression Lug. Conductor Size AWG or kcmil, Compressed Stranded 500 /Compacted Solid 600 /mmSquared Compact 250/300.Frequently Asked Questions
What is the K656CY-HP product?
The K656CY-HP is a 15/25kV 600A Deadbreak Separable Wye Joint with a test point. It is a modular kit used to join cables in a disconnectable 3-way joint.
What standards does the K656CY-HP meet?
The K656CY-HP meets ANSI/IEEE Standard 386, Latest Revision.
Does the K656CY-HP include a test point?
Yes, the K656CY-HP includes an integral capacitive test point.
What are the components included in the kit?
Each kit contains one 3-Way Bus Bar (K656CY-BUS), two lubricants (82-08), one Installation Instruction (IS-0388), and three Straight receptacles (K655YSR).
What are the key features of this wye joint?
Key features include a compact design, fully shielded and submersible 100% peroxide cured EPDM molded rubber, reusable components, and an integral capacitive test point.
What are the fault close capabilities?
The product has a 25kA Symmetrical (Sym) rating for 10 Cycles Momentary & Fault Close for both 15kV and 25kV classes.
What is the continuous current rating?
The continuous current rating for both 15kV and 25kV voltage classes is 600 Amp.
What are the voltage ratings for the 25kV class?
For the 25kV class, the maximum phase-to-ground operating voltage is 16.2kV and maximum phase-to-phase is 28kV. It has a 140kV BIL impulse withstand.
What are the voltage ratings for the 15kV class?
For the 15kV class, the maximum phase-to-ground operating voltage is 8.3kV and maximum phase-to-phase is 14.4kV. It has a 95kV BIL impulse withstand.
How can I order the basic wye joint housing?
To order the basic wye joint housing only, specify K656CY-HP.
How to Install K656/K676 Series Deadbreak Receptacles
This guide provides step-by-step instructions for installing K656/K676 series deadbreak receptacles, designed to splice and tap solid dielectric cables rated for 600A at 15kV and 25kV.
Estimated time: 1h
Tools needed:
Cable stripping tool, Hex wrench, Torque wrench with 15/16 inch socket, Wire brush (for aluminum cable), 650ATY Assembly tool OR 600RRT Assembly tool, Rag, Approved safety solvent
Supplies needed:
K656/K676 Series Receptacle housings, Cable adapters, I, Wye, or H Center sections, Aluminum holding collars, ELASTIMOLD approved lubricant, Hex-head bolts, Crimp connectors, Belleville washers, Flat washers, Nylon venting rod, Electrical tape (for markers), Conductive copper strip (if using flat metallic tape shielded cable), No. 14 AWG copper wire (or equivalent, for grounding), ECS grounding device (optional)
- Prepare for Installation and Initial Cable Setup
DANGER: All apparatus must be de-energized during installation or removal of parts. Inspect all parts for damage, rating, and compatibility with mating parts. Wipe the outer jacket of the cable clean for a distance of 38 inches and cut the cable end squarely. If using an ECS grounding device, slide the ECS tube onto the cable a distance of 38 inches. Slide the receptacle housing onto the cable a distance of 30 inches.
- Perform Detailed Cable Preparation
Refer to the 'SPECIAL CABLE PREPARATION SUPPLEMENT' (Part A for Jacketed Concentric Neutral Cable or Part B for Flat Metallic Tape Shielded Cable with Semi-con Shield) included with these instructions. Follow the specific procedure for your cable type to prepare the cable, including jacket removal, semi-con shield removal, insulation beveling, cleaning, lubrication, and cable adapter installation.
- Prepare Conductor and Crimp Connector
Remove the protruding cable insulation, cutting it even with the end of the cable adapter. Ensure the exposed conductor measures 4 3/4 to 5 inches. Assemble the aluminum retaining ring over the conductor and snug it firmly against the cable adapter. Tighten the socket head screw hand tight with the hex wrench. Confirm the exposed conductor measures 4 3/8 to 4 3/4 inches. Remove the protective cap from the crimp connector. If using aluminum cable, wire brush the conductor and immediately insert it into the crimp connector. Ensure the conductor is fully inserted. Confirm the distance from the end of the connector to the holding collar is 6 3/4 to 7 inches maximum. If over 7 inches, recheck previous work. Repeat these steps for all remaining cables to be joined.
- Crimp Connectors and Assemble Washers/Bolts
Before crimping, confirm components are positioned correctly and bolt holes in the crimp connectors align with the mating part. Crimp the connectors according to their specific instructions, rotating each crimp 90 or 180 degrees. After crimping, measure the distance from the end of the connector to the holding collar. If over 7 inches, redo previous work. Assemble the washers and bolt in the order: flat washer against spade contact, Belleville washer (concave side down), hex-head bolt. Hand tighten. Do not move or reposition any part of the assembly after bolts are tightened.
- Torque Bolts and Lubricate Assembly
Using a torque wrench with a 15/16 inch socket, tighten all bolts to 50 to 60 ft. lbs. Apply the supplied ELASTIMOLD approved lubricant generously to the outside of the cable adapter, the area of the splice section, and the inside mating surface of the receptacle housing.
- Slide Receptacle Housing and Insert Venting Rod
Slide the receptacle housing over the cable adapter and up to the edge of the interface. Insert the nylon venting rod (supplied).
- Complete Receptacle Housing Installation
If using the 650ATY Assembly Tool: Attach the tool, ensuring the “U” shaped yoke is over the splice section and the “C” shaped yoke is over the receptacle housing. Slowly raise the handle to slide the receptacle housing over the splice section. Remove the venting rod. If using the 600RRT Assembly Tool: Attach the tool. Slide the receptacle housing over the interface by turning the hex nut on either side of the tool. Remove the venting rod. WARNING: DO NOT place hand on threaded rod or guide shaft with the assembly tool in place. Repeat these steps for any remaining cables.
- Perform Final Checks and Grounding
Check all cable adapters to ensure they are located properly and remove all vinyl tape markers. Complete the installation of the ECS grounding device according to its instructions (if used). Connect a short length of No. 14 AWG copper wire (or equivalent) to the grounding eyes of the housings. Make a small loop and twist tightly, taking care not to damage the eye. Connect this wire to ground.
Frequently Asked Questions about ABB - Installation Products
How are Thomas and Betts products typically installed?
Thomas and Betts products are installed using a variety of methods tailored to specific applications, including the use of flexible cords and cable fittings, non-metallic cable glands, and armored cable fittings. Proper selection of fittings is crucial to match the cable type and installation environment, ensuring durability and preventing physical damage. Tools such as the Blackburn® Comfort Crimp® and HEX-FLEX® systems enhance installation efficiency and reliability, reducing labor time and ensuring secure connections.
What accessories are available for Thomas and Betts products?
Thomas and Betts offers a comprehensive range of accessories for their products, including various cord and cable fittings, non-metallic cable glands, service entrance cable fittings, and armored cable fittings. Their accessories are designed to enhance installation efficiency and ensure compatibility with different cable types and environmental conditions, providing reliable connections for a wide array of applications.
What environmental ratings do Thomas and Betts products have?
Thomas and Betts products feature robust environmental ratings, including NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications, as well as IEC 60529 IP66 protection. These ratings ensure that their products are designed to withstand harsh industrial environments, with capabilities to resist dust, water, and corrosion, and operate effectively in a wide temperature range.
What communication protocols do Thomas and Betts products support?
Thomas and Betts products support a wide range of industrial communication protocols, including Ethernet, DeviceNet, PROFIBUS, Modbus, CANopen, and others. This extensive compatibility ensures seamless integration and reliable communication across various industrial automation systems, catering to diverse application needs.
What are the key features of Thomas and Betts products?
Thomas and Betts products are known for their innovative designs, high performance, and compliance with industry standards such as the National Electrical Code and Underwriters' Laboratories. They offer a comprehensive range of rugged and reliable electrical fittings, including liquidtight and dust-tight connections, which enhance installation efficiency and reduce overall project costs. Their products are engineered for durability in harsh environments, ensuring long-term reliability and lower installed costs.
What are the main product lines offered by Thomas and Betts?
Thomas and Betts offers a comprehensive range of product lines including electrical connectors, cable management systems, grounding and bonding solutions, and industrial automation components. Their products are designed for durability and reliability in demanding industrial environments, ensuring optimal performance and safety across various applications.
What technical support does Thomas and Betts offer?
Thomas and Betts offers comprehensive technical support, including access to field application engineers for onsite training and installation assistance. Their technical support staff is available to address inquiries related to product specifications and installation practices, ensuring optimal performance and safety of electrical systems. Additionally, they provide a variety of training programs to enhance the knowledge and skills of users in the field.
What industries and applications are Thomas and Betts products used for?
Thomas and Betts products are utilized across various industries including electrical construction, industrial automation, telecommunications, and utilities. Their extensive range of cord and cable fittings, electrical boxes, and metal framing systems are designed for applications that require durability and reliability in harsh environments, ensuring optimal performance in both permanent and temporary installations.
What certifications and standards do Thomas and Betts products comply with?
Thomas and Betts products comply with critical international certifications including UL (Underwriters Laboratories), CSA (Canadian Standards Association), and CE (European Community). Our products are designed to meet rigorous industrial standards such as NEMA enclosure ratings and IEC 60529 IP ratings, ensuring safety and reliability across various industrial applications.
What are the main product lines offered by Ocal?
Ocal offers a comprehensive range of corrosion-resistant conduit systems, including PVC-coated conduit and fittings, conduit bodies, hazardous location fittings, and strut accessories. Their products are designed to provide superior corrosion protection, featuring a hot-dipped galvanizing process and UL listed Type 4X PVC-coated conduit bodies, ensuring durability in the most demanding environments.
