Authorized ABB Distributor (Installation Products)
ABB - Installation Products K655BLR-H0240 - 15/25kV 600 Series Deadbreak Elbow without Test Point (with Stud), Cable Insulation Diameter 0.850 inch to 1.050 inch. Aluminum Compression Lug. Conductor Size AWG or kcmil, Compressed Stranded 1/0 /Compacted Solid 2/0.

ABB Installation Products K655BLR-H0240 15/25kV 600 Series Deadbreak Elbow without Test Point (with Stud), Cable Insulation…

UPC: 783786780204


Documents & Media
Installation InstructionsSpecification SheetManufacturer Product Website

Contact for Pricing

Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.

Overview

The ABB K655BLR-H0240 is a 15/25kV 600 Series Deadbreak Elbow connector engineered for medium-voltage power distribution systems. This deadbreak elbow is designed for fully shielded, dead-front submersible cable connections to high-voltage apparatus, ensuring safe and reliable electrical terminations in demanding industrial environments. The K655BLR-H0240 accommodates cable insulation diameters from 0.850 inches to 1.050 inches, making it compatible with a range of cable sizes. It features an aluminum compression lug for durable, low-resistance terminations and is specified for conductor sizes AWG or kcmil, including compressed stranded 1/0 or compacted solid 2/0 conductors. The connector is constructed without a test point, simplifying installation for applications where direct testing is not required. The 600 Series designation aligns with ABB's established product line for medium-voltage power distribution, ensuring compatibility within the system. This deadbreak elbow is rated for 900 Amp continuous current and meets ANSI/IEEE Standard 386, providing a secure and reliable connection for medium-voltage applications. Typical uses include substations, industrial facilities, utility networks, and other high-voltage environments where electrical integrity and mechanical strength are critical. The product is part of ABB's Installation Products catalog and is designed for ease of installation using standard hand tools in a de-energized state.
  • 15/25kV voltage class with 900 Amp continuous current rating
  • Accommodates cable insulation diameters from 0.850" to 1.050"
  • Aluminum compression lug for durable, low-resistance terminations
  • Specified for compressed stranded 1/0 or compacted solid 2/0 conductors
  • Designed without a test point for simplified installation

Specifications

Application
400 Amps
Connection
Compression
Connection Type
Deadbreak Elbow
Current Rating
600 A
Material
Aluminum
Material
Aluminum (compression lug)
Series
600 Series
Size
0.850-1.050 inches (cable insulation diameter)
Temperature Rating, Maximum
149 F
Temperature Rating, Maximum
65 C
Temperature Rating, Minimum
-40 F
Temperature Rating, Minimum
-40 C
Type
Elbow without Test Point
Voltage Rating
15/25 kV
Package Dimensions (L x W x H)
0.01 IN x 0.01 IN x 0.01 IN
Package Dimensions (L x W x H)
0.0254 cm x 0.0254 cm x 0.0254 cm
Package Weight (Imperial)
1.0000 L
Package Weight (Metric)
0.4540 kg
600 Series Elbow with out Test Point, With Stud, Cable Insulation Diameter 1.090 inch to 1.310 inch. Aluminum Compression Lug. Conductor Size AWG Compressed Stranded 500 /Solid 600 /mmSquared 250/300.

K655BLR-K0330

600 Series Elbow with out Test Point, With Stud, Cable Insulation Diameter 1.090 inch to 1.310 inch. Aluminum Compression Lug. Conductor Size AWG Compressed Stranded 500 /Solid 600 /mmSquared 250/300.
15/25kV 600 Series Deadbreak Elbow without Test Point (with Stud), Cable Insulation Diameter 1.515 inch to 1.780 inch. Aluminum Compression Lug. Conductor Size AWG or kcmil, Compressed Stranded 1000.

K655BLR-N0410

15/25kV 600 Series Deadbreak Elbow without Test Point (with Stud), Cable Insulation Diameter 1.515 inch to 1.780 inch. Aluminum Compression Lug. Conductor Size AWG or kcmil, Compressed Stranded 1000.
600 Amp, 15/25kV, Insulating Plug with Cap.

K650BIPVS010

600 Amp, 15/25kV, Insulating Plug with Cap.
15/25/35kv, Cold-Shrinkable Seal kit, Size range .80 inch to 1.5 inch jacket diameters, maximum installed diameter is approximately 2 inches. 60 inch long braid

200ECS-G3-60

15/25/35kv, Cold-Shrinkable Seal kit, Size range .80 inch to 1.5 inch jacket diameters, maximum installed diameter is approximately 2 inches. 60 inch long braid
15/25kV 600 Series Deadbreak Insulated Plug (with Cap). Material Epoxy, Length 4.5 inch, Widest Diameter 3 inch. - Pack of 15

K650BIP-15PACK

15/25kV 600 Series Deadbreak Insulated Plug (with Cap). Material Epoxy, Length 4.5 inch, Widest Diameter 3 inch. - Pack of 15
Protective Cap, Red Polyethylene, Outside Diameter 3 inch x 1 inch Inside Length

600-06-6

Protective Cap, Red Polyethylene, Outside Diameter 3 inch x 1 inch Inside Length
15/25/35kv, Cold-Shrinkable Seal kit, Size range 1.28 inch to 2.30 inch jacket diameters, maximum installed diameter is approximately 2.75 inches. 60 inch long Braid

600ECS-G3-60

15/25/35kv, Cold-Shrinkable Seal kit, Size range 1.28 inch to 2.30 inch jacket diameters, maximum installed diameter is approximately 2.75 inches. 60 inch long Braid
15/25kv, 200 Amp Bushing Clamp and Gasket Kit with 3-Holes. For use on Bushing Well without Bail Tabs only.

K1601PC-S2-CK3H

15/25kv, 200 Amp Bushing Clamp and Gasket Kit with 3-Holes. For use on Bushing Well without Bail Tabs only.

Frequently Asked Questions

What is the voltage rating of the K655BLR-H0240 deadbreak elbow?

The ABB K655BLR-H0240 deadbreak elbow has a voltage rating of 15/25kV.

What cable insulation diameters does this deadbreak elbow accommodate?

This deadbreak elbow is designed to fit cable insulation diameters ranging from 0.850 inches to 1.050 inches.

What type of lug is used on the K655BLR-H0240?

The K655BLR-H0240 features an aluminum compression lug for termination.

What conductor sizes are compatible with this deadbreak elbow?

It is compatible with conductor sizes AWG or kcmil, specifically 1/0 compressed stranded or 2/0 compacted solid.

Does the K655BLR-H0240 have a test point?

No, the K655BLR-H0240 is a deadbreak elbow without a test point.

How to Install 655/675LR and K655/K675LR Deadbreak Elbow Connectors

This guide provides step-by-step instructions for the safe installation and wiring of 600-ampere or 900-ampere deadbreak elbow connectors on 15kV and 25kV class systems. It covers cable preparation, connector assembly, and grounding procedures.

Estimated time: 1h 30m

Tools needed:

Wire brush, Crimping tool, Hotstick, Suitable sensing device for capacitive test points, Wire strippers, Torque wrench

Supplies needed:

Elbow Connector (655/675LR or K655/K675LR), Cable Adapter, Compression Lug, Insulating Plug (if required), Lubricant, Threaded Stud (from Stud Prepack), Wire (at least No. 14 AWG Copper for grounding), Suitable grounding connector, HV insulated cap(s) or connector(s) (to replace shipping covers), Waterproofing material (for cable jacket)

  1. Prepare the Cable for Installation

    DANGER: All apparatus must be de-energized during installation or removal of parts. Assemble the cable in its final position with enough slack to allow for elbow removal. For concentric neutral cable, unwind the concentric neutral wires. Cut the cable 1-3/4” (45mm) from the centerline of the mating product.

  2. Clean Cable Outer Surface

    Clean the outer surface of the cable a distance of 24” (610mm) or up to the bent back concentric neutral wires.

  3. Prepare Cable End

    Remove the outer jacket (where applicable) and prepare the cable as shown in the documentation for your specific cable type (e.g., non-jacketed concentric neutral, jacketed shield wires, flat metallic tape shield, fabric tape shield, or longitudinally corrugated shield) to the specified dimensions (9-3/4”, 10-3/4”, 12-3/4” for insulation, semi-con shield, and tape marker respectively).

  4. Bevel and Lubricate Cable Insulation

    Bevel the end of the cable insulation at a 45-degree angle, approximately 1/4” (6mm) back. Thoroughly clean and then lubricate the cable insulation, always working toward the semi-con shield.

  5. Install Cable Adapter

    Install the cable adapter, small end first, until it is flush with the edge of the tape marker.

  6. Expose Conductor

    Remove the protruding cable insulation by cutting it even with the end of the cable adapter. Do not cut or nick the cable adapter or the conductor. Verify the length of the exposed conductor is between 4-1/4” and 4-9/16” (108mm-116mm). If not, redo the assembly.

  7. Crimp Compression Lug

    For copper conductors, fully insert the conductor into the compression lug. For aluminum conductors, wire brush the conductor and immediately fully insert it. Measure the “Check Dimension” before crimping (it should be less than 6-3/8”). Crimp the compression lug following its supplied instructions. Wipe all excess inhibitor from the lug and cable adapter surface. Verify the distance from the end of the compression lug to the cable adapter after crimping is between 6-3/8” to 7-1/8” (162mm-181mm). If not, redo the assembly.

  8. Install Elbow onto Cable Adapter

    Lubricate the cable adapter and the inside of the elbow cable entrance. Install the elbow onto the cable adapter until it cannot advance further. Ensure the cable adapter is still flush with the tape marker; reposition if necessary. Remove the tape marker.

  9. Prepare Mating Products

    DANGER: DO NOT CONNECT OR DISCONNECT MATING PRODUCTS WHILE ENERGIZED. DO NOT ENERGIZE WHILE DISCONNECTED. Remove any protective caps from the elbow and the mating part. Hand tighten the threaded stud supplied with the elbow into the mating part, if the mating part is not already equipped with a stud. Clean and lubricate both the elbow and the mating part with the supplied lubricant, keeping surfaces clean.

  10. Connect Elbow to Mating Part

    Push the elbow onto the mating part, lining up the hole in the compression lug with the stud on the mating part.

  11. Connect Opposite Mating Part (if applicable)

    Clean and lubricate the mating part for the opposite end of the elbow. Insert this mating part into the elbow, engage the threads, and hand tighten. Torque the mating part according to the instructions supplied with that specific mating part.

  12. Install Insulating Plug (if used)

    If an insulating plug is used as a mating part, clean and lubricate the inner surface of the voltage detection cap and place it on the elbow. Push down hard until the cap snaps into place.

  13. Ground the Cable Shield

    Insert one end of a wire with ampacity at least equivalent to No. 14 AWG Copper through the grounding eye and twist to make a small loop, ensuring not to damage the eye. Connect this wire to ground using a suitable connector. The shield of the cable must be grounded according to the instructions supplied with the grounding device, or through an alternate method if no grounding device is used. It is also recommended that the jacket of the cable be waterproofed at this point to prevent moisture from entering the cable.

  14. Torque All Components

    CAUTION: When constructing 600-amp L-Kits, be sure to tighten each component to the specified torque per its instructions.

  15. Perform Voltage Test

    Remove the test point cap with a hotstick, peeling off at an angle rather than pulling directly. WARNING: The voltage test point is a capacitance device; it is not directly connected to the conductor. Do not use conventional voltage measuring equipment. Use a suitable sensing device made for use with separable connectors manufactured with capacitive test points to determine if the cable is energized. Treat the elbow as energized until the “no voltage” test point indication is confirmed by other means to prevent serious or fatal injury. After voltage detection, clean and lubricate the inside surface of the cap with silicone lubricant and replace it on the test point.

Frequently Asked Questions about ABB - Installation Products

How are Thomas and Betts products typically installed?

Thomas and Betts products are installed using a variety of methods tailored to specific applications, including the use of flexible cords and cable fittings, non-metallic cable glands, and armored cable fittings. Proper selection of fittings is crucial to match the cable type and installation environment, ensuring durability and preventing physical damage. Tools such as the Blackburn® Comfort Crimp® and HEX-FLEX® systems enhance installation efficiency and reliability, reducing labor time and ensuring secure connections.

What accessories are available for Thomas and Betts products?

Thomas and Betts offers a comprehensive range of accessories for their products, including various cord and cable fittings, non-metallic cable glands, service entrance cable fittings, and armored cable fittings. Their accessories are designed to enhance installation efficiency and ensure compatibility with different cable types and environmental conditions, providing reliable connections for a wide array of applications.

What environmental ratings do Thomas and Betts products have?

Thomas and Betts products feature robust environmental ratings, including NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications, as well as IEC 60529 IP66 protection. These ratings ensure that their products are designed to withstand harsh industrial environments, with capabilities to resist dust, water, and corrosion, and operate effectively in a wide temperature range.

What communication protocols do Thomas and Betts products support?

Thomas and Betts products support a wide range of industrial communication protocols, including Ethernet, DeviceNet, PROFIBUS, Modbus, CANopen, and others. This extensive compatibility ensures seamless integration and reliable communication across various industrial automation systems, catering to diverse application needs.

What are the key features of Thomas and Betts products?

Thomas and Betts products are known for their innovative designs, high performance, and compliance with industry standards such as the National Electrical Code and Underwriters' Laboratories. They offer a comprehensive range of rugged and reliable electrical fittings, including liquidtight and dust-tight connections, which enhance installation efficiency and reduce overall project costs. Their products are engineered for durability in harsh environments, ensuring long-term reliability and lower installed costs.

What are the main product lines offered by Thomas and Betts?

Thomas and Betts offers a comprehensive range of product lines including electrical connectors, cable management systems, grounding and bonding solutions, and industrial automation components. Their products are designed for durability and reliability in demanding industrial environments, ensuring optimal performance and safety across various applications.

What technical support does Thomas and Betts offer?

Thomas and Betts offers comprehensive technical support, including access to field application engineers for onsite training and installation assistance. Their technical support staff is available to address inquiries related to product specifications and installation practices, ensuring optimal performance and safety of electrical systems. Additionally, they provide a variety of training programs to enhance the knowledge and skills of users in the field.

What industries and applications are Thomas and Betts products used for?

Thomas and Betts products are utilized across various industries including electrical construction, industrial automation, telecommunications, and utilities. Their extensive range of cord and cable fittings, electrical boxes, and metal framing systems are designed for applications that require durability and reliability in harsh environments, ensuring optimal performance in both permanent and temporary installations.

What certifications and standards do Thomas and Betts products comply with?

Thomas and Betts products comply with critical international certifications including UL (Underwriters Laboratories), CSA (Canadian Standards Association), and CE (European Community). Our products are designed to meet rigorous industrial standards such as NEMA enclosure ratings and IEC 60529 IP ratings, ensuring safety and reliability across various industrial applications.

What are the main product lines offered by Ocal?

Ocal offers a comprehensive range of corrosion-resistant conduit systems, including PVC-coated conduit and fittings, conduit bodies, hazardous location fittings, and strut accessories. Their products are designed to provide superior corrosion protection, featuring a hot-dipped galvanizing process and UL listed Type 4X PVC-coated conduit bodies, ensuring durability in the most demanding environments.