Authorized ABB Distributor (Installation Products)
ABB - Installation Products 776BGADDRK - 35 kv, 600 Amp, Deadbreak, Grounding Ball Device Kit. includes Insulated Cap with Test Point, Grounding Device with 1 inch (25.4mm) Ball
More images

ABB Installation Products 776BGADDRK 35 kv, 600 Amp, Deadbreak, Grounding Ball Device Kit. includes Insulated Cap with Test…

UPC: 075114309561


Documents & Media
BrochureInstallation InstructionsSpecification SheetManufacturer Product Website

Contact for Pricing

Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.

Overview

The ABB 776BGADDRK 35kV 600A Deadbreak Grounding Ball Device Kit provides a permanent, direct grounding solution for medium-voltage electrical systems up to 35kV. This kit includes a 600 Series Grounding Device with a 1 inch (25.4mm) ball terminal and a 600 Series Insulated Cap with capacitive test point for safe voltage verification before grounding operations. The deadbreak design enables connection and disconnection under load without service interruption, minimizing downtime during maintenance or fault conditions. Key specifications include a continuous current rating of 600A and a momentary rating of 25kA for 10 cycles, ensuring robust performance in high-current applications. The device meets ANSI/IEEE Standard 386-2006, with a maximum phase-to-ground operating voltage of 21.1kV and phase-to-phase voltage of 36.6kV. It provides a dielectric strength of 150kV BIL (impulse withstand), 50kV AC for one minute, and 103kV DC for 15 minutes, along with a corona extinction level of 26.0kV AC at 3pC sensitivity. The grounding device connects to the back interface of 600A series elbow connectors (T-body) to provide a direct ground connection. The insulated cap with capacitive test point ensures safe voltage verification, while the grounding cable attaches to the system ground once the circuit is de-energized. This kit is ideal for use in switchgear, transformers, and cable terminations where temporary or permanent grounding is required for worker safety and equipment protection. Each kit includes the grounding device, insulated cap, instruction sheet, and silicone lubricant for installation and maintenance.
  • 35kV voltage class with 21.1kV max phase-to-ground and 36.6kV max phase-to-phase operating voltage
  • 600A continuous current rating with 25kA momentary rating for 10 cycles
  • Deadbreak design allows connection/disconnection under load without service interruption
  • Includes 600 Series Grounding Device with 1in (25.4mm) ball terminal and insulated cap with capacitive test point
  • Meets ANSI/IEEE Standard 386-2006 with 150kV BIL impulse withstand and 50kV AC/103kV DC dielectric strength

Specifications

Amperage Rating
600 A
Application
35 kV, 600 Amps
Conductor Material
Copper , EPDM Rubber
Connection
Push-In
Current Rating
600 A
Insulation
EPDM Rubber
Size
1 inch (25.4mm)
Special Features
1 inch (25.4mm) Ball
Standard
ANSI/IEEE Standard 386
Type
Grounding Device Ball Kit
Voltage Rating
35 kV
Package Dimensions (L x W x H)
0.01 IN x 0.01 IN x 0.01 IN
Package Dimensions (L x W x H)
0.0254 cm x 0.0254 cm x 0.0254 cm
Package Weight (Imperial)
1.0000 L
Package Weight (Metric)
0.4540 kg
35 kv, 600 Amp, DeadBreak, Ball Grounding Device, Ground Clamp Connection has 1 inch (25.4mm) Diameter Ball. Length 11.56 inch, Diameter 3 inch.

771BGAD

35 kv, 600 Amp, DeadBreak, Ball Grounding Device, Ground Clamp Connection has 1 inch (25.4mm) Diameter Ball. Length 11.56 inch, Diameter 3 inch.
Intersystem grounding and bonding bridge for wall mount applications. Accomodates #6 to #2 Ground Electrode Conductors and #14 to #4 bonding conductors (4 each). Includes snap in place plastic cover.

IGB-WM

Intersystem grounding and bonding bridge for wall mount applications. Accomodates #6 to #2 Ground Electrode Conductors and #14 to #4 bonding conductors (4 each). Includes snap in place plastic cover.
Compression Lugs 1.00 Hole-to-Hole C/C, Fits #4/0 Cable, Purple, Copper

DGCL402

Compression Lugs 1.00 Hole-to-Hole C/C, Fits #4/0 Cable, Purple, Copper
1/4" x 2" x 12" Grounding Busbar.

GB2D0008TPI-1

1/4" x 2" x 12" Grounding Busbar.
35 kv, 600 Amp, Deadbreak, Grounding Device Kit. includes Grounding Device with standard C-Clamp ground connection, Insulated Cap with Test Point

776GADDRK

35 kv, 600 Amp, Deadbreak, Grounding Device Kit. includes Grounding Device with standard C-Clamp ground connection, Insulated Cap with Test Point
Copper Heavy-Duty Two-Hole NEMA Lug, Wire Size 3/0, 1/2 Inch Bolt Hole, Tin Plated

HDL 3/0 NTN

Copper Heavy-Duty Two-Hole NEMA Lug, Wire Size 3/0, 1/2 Inch Bolt Hole, Tin Plated
15/25kV, 600 Amps, Insulating Cap for Grounding Device with 1 inch (25.4mm) Ball. Mates with K671BGAD Grounding Accessory Device. Length Counting Bail 10 inch, Widest Diameter 3.46 inch.

K676BGADDR

15/25kV, 600 Amps, Insulating Cap for Grounding Device with 1 inch (25.4mm) Ball. Mates with K671BGAD Grounding Accessory Device. Length Counting Bail 10 inch, Widest Diameter 3.46 inch.
15/25kV, 600 Amp Series Grounding Device with 1 inch diameter Ball - Hot Line Clamp Grounding Bus. Conforms to IEEE Standard 386. Mates with K676BGADDR insulated Receptacle. Use 1 inch Hex for Assembly.

K671BGAD

15/25kV, 600 Amp Series Grounding Device with 1 inch diameter Ball - Hot Line Clamp Grounding Bus. Conforms to IEEE Standard 386. Mates with K676BGADDR insulated Receptacle. Use 1 inch Hex for Assembly.

Frequently Asked Questions

What material is the GAD constructed from?

The Elastimold GAD features full copper construction, which is ideal for 600 A and 900 A applications.

Is the GAD hot-stick workable?

Yes, the Elastimold grounding-aid device and its associated insulating cap with integral capacitive test point are designed to be hot-stick workable.

What types of ground clamps are compatible with the GAD?

The GAD is available for C and ball-stud grounding clamp types. Series GAD and GADDR are for C-clamp, while BGAD and BGADDR are for ball-stud connections.

What system voltage classes is the GAD available for?

The Elastimold GAD is available for 15 kV, 25 kV, and 35 kV system classes.

How is the Elastimold GAD installed?

The Elastimold GAD easily installs in the rear interface of a 600 A series elbow connector (T-body). Once the circuit is de-energized, it is grounded through a grounding cable.

What is the purpose of the protective cap?

The removable protective cap includes a capacitive test point, allowing easy access to check if the system is de-energized. It is designed to be hot-stick workable.

What are the current ratings of the GAD?

The GAD provides a direct 600 A or 900 A rated ground connection. Its full copper construction is ideal for these applications.

What fault current can the GAD withstand?

The Elastimold GAD has a short circuit withstand rating of up to 25 kA. It is rated for 600 A or 900 A applications.

What is the Elastimold GAD used for?

The Elastimold grounding-aid device (GAD) is used in underground systems when available fault currents exceed 10 kA to provide a permanent, reliable ground connection.

What system voltage classes is the GAD available for?

The Elastimold GAD is available for 15 kV, 25 kV, and 35 kV system classes.

How to Install the LINK-C Deadbreak Cam Link Operable Connector System

This guide provides step-by-step instructions for installing the LINK-C 600 amp deadbreak cam link operable connector system, including mounting, lubrication, and grounding procedures.

Estimated time: 1h 30m

Tools needed:

Hot stick, Torque wrench, Suitable tool for 1-inch hex, 600ATM Operating Tool, Wire strippers

Supplies needed:

ELASTIMOLD lubricant, Mounting hardware (supplied with alignment bracket), #14 AWG or #12 AWG solid copper wire, Appropriate ground connector

  1. Prepare for Installation and Safety Check

    De-energize all apparatus before starting installation or removal of parts. Inspect all package contents for completeness and damage. Verify all components fit properly with the cable and mating products. Gather all required tools and supplies, ensuring a clean work area. Safety Warning: This product should only be installed by competent personnel trained in high voltage electrical equipment safety practices.

  2. Install 600 Amp Elbow and Bushing Extender

    Install the 600 amp elbow onto the cable according to its specific instructions, ensuring alignment with the stand-off plug or apparatus bushing. Clean and thoroughly lubricate the apparatus bushing and both interfaces of the 600 amp bushing extender with ELASTIMOLD lubricant. Install the bushing extender onto the apparatus bushing. Insert the 600ATM into the retainer contact, engage its internal hex broach, then insert the retainer contact into the bushing extender. Thread the retainer contact into the apparatus bushing using a suitable tool on the 1-inch hex portion of the 600ATM, and torque to 50-60 ft-lbs.

  3. Install Elbow onto Standoff Plug and Lubricate

    Clean and thoroughly lubricate the epoxy standoff plug and both interfaces of the 600 amp elbow with ELASTIMOLD lubricant. Install the elbow onto the epoxy standoff plug. Insert the 600AMT into the retainer contact, engage its internal hex broach, then insert the retainer contact into the 600 amp elbow through the compression lug hole. Thread the retainer contact into the epoxy standoff plug using a suitable tool on the 1-inch hex portion of the 600AMT, and torque to 50-60 ft-lbs.

  4. Install and Secure the Alignment Bracket

    Remove the bushing extender clamp and elbow clamp from the alignment bracket. Position the alignment bracket on the bushing extender 2.5 inches (63.5mm) from the grounding eye. Assemble the bushing extender clamp to the alignment bracket using the supplied hardware. Torque by alternating sides until the clamp tabs are flush and tight on both sides. Position the elbow within the alignment bracket, ensuring the elbow cuff aligns evenly with the bushing extender cuff. Assemble the elbow clamp to the alignment bracket with the supplied hardware. Torque by alternating sides until the clamp tabs are flush and tight. Ensure the elbow clamp notch faces the cable entrance of the elbow.

  5. Install the LINK-C Connector

    Clean and thoroughly lubricate both 600 ampere interfaces of the Link with ELASTIMOLD lubricant. Align the Link so it is perpendicular to the switch faceplate when inserted into the bushing extender and elbow. Insert the Link into the bushing extender and elbow, ensuring both lever arms are positioned on the inside of the alignment bracket legs. Engage the pivot pin into the slots in the alignment bracket legs. While pushing inward, use a hot stick eye to move the lever arms downward, engaging the roller pin and moving the Link inward. Continue until the lever arms are perpendicular to the alignment bracket leg.

  6. Ground the System

    Ground the elbow: Feed a #14 AWG or #12 AWG solid copper wire through the grounding eye on the elbow, twist it tight, and connect it to ground using an appropriate connector. Clean and lubricate the 200 amp interface on the Link. Ground and then install the desired mating product onto the 200 amp interface according to its specific installation instructions. Ground the cable: If using concentric neutral cable, twist the concentric neutral wires together and connect to ground. If using 20MA or 21MA grounding devices, connect the ground lead from the device to ground. For three-phase installations, ensure all grounds from all three phases are tied to a common ground point.

Frequently Asked Questions about ABB - Installation Products

How are Thomas and Betts products typically installed?

Thomas and Betts products are installed using a variety of methods tailored to specific applications, including the use of flexible cords and cable fittings, non-metallic cable glands, and armored cable fittings. Proper selection of fittings is crucial to match the cable type and installation environment, ensuring durability and preventing physical damage. Tools such as the Blackburn® Comfort Crimp® and HEX-FLEX® systems enhance installation efficiency and reliability, reducing labor time and ensuring secure connections.

What accessories are available for Thomas and Betts products?

Thomas and Betts offers a comprehensive range of accessories for their products, including various cord and cable fittings, non-metallic cable glands, service entrance cable fittings, and armored cable fittings. Their accessories are designed to enhance installation efficiency and ensure compatibility with different cable types and environmental conditions, providing reliable connections for a wide array of applications.

What environmental ratings do Thomas and Betts products have?

Thomas and Betts products feature robust environmental ratings, including NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications, as well as IEC 60529 IP66 protection. These ratings ensure that their products are designed to withstand harsh industrial environments, with capabilities to resist dust, water, and corrosion, and operate effectively in a wide temperature range.

What communication protocols do Thomas and Betts products support?

Thomas and Betts products support a wide range of industrial communication protocols, including Ethernet, DeviceNet, PROFIBUS, Modbus, CANopen, and others. This extensive compatibility ensures seamless integration and reliable communication across various industrial automation systems, catering to diverse application needs.

What are the key features of Thomas and Betts products?

Thomas and Betts products are known for their innovative designs, high performance, and compliance with industry standards such as the National Electrical Code and Underwriters' Laboratories. They offer a comprehensive range of rugged and reliable electrical fittings, including liquidtight and dust-tight connections, which enhance installation efficiency and reduce overall project costs. Their products are engineered for durability in harsh environments, ensuring long-term reliability and lower installed costs.

What are the main product lines offered by Thomas and Betts?

Thomas and Betts offers a comprehensive range of product lines including electrical connectors, cable management systems, grounding and bonding solutions, and industrial automation components. Their products are designed for durability and reliability in demanding industrial environments, ensuring optimal performance and safety across various applications.

What technical support does Thomas and Betts offer?

Thomas and Betts offers comprehensive technical support, including access to field application engineers for onsite training and installation assistance. Their technical support staff is available to address inquiries related to product specifications and installation practices, ensuring optimal performance and safety of electrical systems. Additionally, they provide a variety of training programs to enhance the knowledge and skills of users in the field.

What industries and applications are Thomas and Betts products used for?

Thomas and Betts products are utilized across various industries including electrical construction, industrial automation, telecommunications, and utilities. Their extensive range of cord and cable fittings, electrical boxes, and metal framing systems are designed for applications that require durability and reliability in harsh environments, ensuring optimal performance in both permanent and temporary installations.

What certifications and standards do Thomas and Betts products comply with?

Thomas and Betts products comply with critical international certifications including UL (Underwriters Laboratories), CSA (Canadian Standards Association), and CE (European Community). Our products are designed to meet rigorous industrial standards such as NEMA enclosure ratings and IEC 60529 IP ratings, ensuring safety and reliability across various industrial applications.

What are the main product lines offered by Ocal?

Ocal offers a comprehensive range of corrosion-resistant conduit systems, including PVC-coated conduit and fittings, conduit bodies, hazardous location fittings, and strut accessories. Their products are designed to provide superior corrosion protection, featuring a hot-dipped galvanizing process and UL listed Type 4X PVC-coated conduit bodies, ensuring durability in the most demanding environments.