Authorized ABB Distributor (Installation Products)
ABB - Installation Products 775CPSP - 35kV, 900Amp, Deadbreak, Connecting Plug, use 600ATM assembly tool. Factory assembled Stud, which is not field removable.

ABB Installation Products 775CPSP 35kV, 900Amp, Deadbreak, Connecting Plug, use 600ATM assembly tool. Factory assembled…

UPC: 783786387922


Documents & Media
Installation InstructionsSpecification SheetManufacturer Product Website

Contact for Pricing

Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.

Overview

The ABB 775CPSP (SKU 775CPSP) is a 35kV, 900 Amp Deadbreak Connecting Plug designed for de-energized connections in medium-voltage power distribution systems. This model features a factory-assembled, non-field-removable stud, ensuring reliable and permanent interface for connecting two or more Elastimold® 775LR/776LR 900 Amp connectors. Engineered to meet ANSI/IEEE Standard 386, the 775CPSP offers robust performance with a 21.1kV maximum phase-to-ground operating voltage and 36.6kV maximum phase-to-phase voltage. It boasts a 150kV BIL impulse withstand rating (1.2 x 50 microsecond wave) and a 50kV AC one-minute withstand. The connector provides continuous 900 Amp current handling and can withstand 25kA symmetrical momentary current for 10 cycles. Its construction utilizes 100% peroxide-cured EPDM insulation and conductive materials, ensuring excellent dielectric integrity and corona extinction at 26kV AC with 3pC sensitivity. Installation requires the 600ATM Hex Tool for precise torque control, guaranteeing joint integrity. This deadbreak plug is ideal for industrial facilities, substations, and utility power grids requiring safe circuit isolation and load-break connections. Each kit includes the connecting plug, lubricant tube (82-08), and installation instructions (IS-0230 and IS-0915).
  • 35kV, 900 Amp Deadbreak rated connecting plug
  • Factory-assembled stud (non-field removable)
  • 100% peroxide-cured EPDM insulation and conductive materials
  • Meets ANSI/IEEE Standard 386
  • Requires 600ATM Hex Tool for installation

Specifications

Application
35 kV, 900 Amps
Material
Copper
Temperature Rating, Maximum
149 F
Temperature Rating, Maximum
65 C
Temperature Rating, Minimum
-40 F
Temperature Rating, Minimum
-40 C
Type
Connecting Plug
Package Dimensions (L x W x H)
0.01 IN x 0.01 IN x 0.01 IN
Package Dimensions (L x W x H)
0.0254 cm x 0.0254 cm x 0.0254 cm
Package Weight (Imperial)
1.0000 L
Package Weight (Metric)
0.4540 kg
900 Amp, 35kV, 600 Series Elbow with Test Point Housing only, with Stud.

776BLR

900 Amp, 35kV, 600 Series Elbow with Test Point Housing only, with Stud.
900 Amp, 15/25kV, Deadbreak, Vault Stretcher Threaded Stud. 2.779 inch long x 5/8 inch Diameter. 5/6-11 UNC Thread on Both Ends. Tin Plated Copper.

675VSA

900 Amp, 15/25kV, Deadbreak, Vault Stretcher Threaded Stud. 2.779 inch long x 5/8 inch Diameter. 5/6-11 UNC Thread on Both Ends. Tin Plated Copper.
200 Amp, 15/25kV, DeadBreak Elbow, Bushing Insert, Bails are required, but not included, order separately.

K1501-A1(1)-H

200 Amp, 15/25kV, DeadBreak Elbow, Bushing Insert, Bails are required, but not included, order separately.
35kV 600 Series Deadbreak 4-Point Junction, with adjustable bracket. Consists of Rubber Junction with Stainless Steel Mounting Plate, Back Plate and Adustable Mounting Bracket.

750J4-U

35kV 600 Series Deadbreak 4-Point Junction, with adjustable bracket. Consists of Rubber Junction with Stainless Steel Mounting Plate, Back Plate and Adustable Mounting Bracket.
35kV 600 Series Deadbreak 2-Point Junction, includes Rubber Junction, Stainless Steel U-Straps and Back Plate, No Bracket

750-J2-5

35kV 600 Series Deadbreak 2-Point Junction, includes Rubber Junction, Stainless Steel U-Straps and Back Plate, No Bracket
35kV 600 Series Deadbreak 4-Point Junction, includes Rubber Junction, Stainless Steel U-Straps and Back Plate, No Bracket

750J4-5

35kV 600 Series Deadbreak 4-Point Junction, includes Rubber Junction, Stainless Steel U-Straps and Back Plate, No Bracket
200 Amp, 35kV Loadbreak Bushing Insert, Includes internal torquing feature using 200AT Assembly Tool. Includes a black vent ring.

3701A3(1)-H

200 Amp, 35kV Loadbreak Bushing Insert, Includes internal torquing feature using 200AT Assembly Tool. Includes a black vent ring.
15/25kv, Long Shank Well with Bail Tabs and With Replaceable Well Stud (9-1/4 inch Bushing Shank Length), H option

K1601-PC-T1R-H

15/25kv, Long Shank Well with Bail Tabs and With Replaceable Well Stud (9-1/4 inch Bushing Shank Length), H option

Frequently Asked Questions

What is the 775CP connecting plug used for?

The 775CP connecting plug is an insulated bus used to attach and connect two or more Elastimold® 775LR/776LR 900 Amp connectors.

What tool is required for 775CP installation?

The 775CP connecting plug requires a 600ATM Hex Tool for installation.

What is the maximum operating voltage for 775CP?

The maximum phase-to-ground operating voltage for the 775CP is 21.1kV.

What is the continuous current rating of the 775CP?

The 775CP connecting plug has a 900 Amp continuous current rating.

How to order 775CP with a factory-assembled stud?

To order the 775CP with a factory-assembled stud, add "SP" to the part number.

Can the 775CP be connected while energized?

The 775CP allows for de-energized connection of two 900 Amp connectors.

How to order 775CP with a loose stud?

To order the 775CP with a loose stud, add the suffix "S" to the part number.

What is included in the 775CP kit?

Each kit contains one 775CP connecting plug, one tube of 82-08 lubricant, and installation instructions IS-0230 and IS-0915.

What is the continuous current rating of the 775CP?

The 775CP connecting plug has a 900 Amp continuous current rating.

What tool is required for 775CP installation?

The 775CP connecting plug requires a 600ATM Hex Tool for installation.

How to Install the 600/900 Series Deadbreak Connecting Plug

This guide provides step-by-step instructions for the safe installation and connection of the 600/900 series deadbreak connecting plug, an accessory for power distribution systems, by mating it with compatible devices.

Estimated time: 20m

Tools needed:

3/8 inch hex bit socket, Torque wrench

Supplies needed:

Connecting Plug, Lubricant (DO NOT SUBSTITUTE), No. 14 AWG (2.5mm) copper wire or equivalent

  1. De-energize and Inspect Apparatus

    Ensure all apparatus is de-energized during installation or removal of parts. Do not touch or move energized products. Inspect all parts for damage, correct rating, and compatibility with mating parts before proceeding. Failure to follow these instructions will result in serious or fatal injury.

  2. Install Stud into Mating Plug Device

    If the mating plug device is not equipped with a stud, hand tighten the stud into the mating plug device. Thread the stud until the start of the flats are below the contact surface.

  3. Clean and Lubricate Connecting Plug and Mating Part

    Clean both the connecting plug and its mating part as indicated in the diagram. Lubricate both parts and the stud with the supplied lubricant. DO NOT SUBSTITUTE other lubricants, as they may be harmful to the products. Ensure all surfaces remain clean.

  4. Connect and Torque the Connecting Plug

    Push the connecting plug into the elbow, bushing extender, vault stretcher, or elbow end module. Engage the threads, holding the contact of the connecting plug against the contact surface of the mating part. Use a 600ATM or a 3/8 inch hex bit socket and a torque wrench to tighten, exerting 50 to 60 foot-pounds (68 to 81 newton-meters) of torque.

  5. Ground the Connecting Plug

    If applicable, insert one end of a No. 14 AWG (2.5mm) copper wire or equivalent through the grounding eye on the connecting plug. Twist the wire tightly, taking care not to damage the eye. Connect the other end of the wire to ground.

Frequently Asked Questions about ABB - Installation Products

How are Thomas and Betts products typically installed?

Thomas and Betts products are installed using a variety of methods tailored to specific applications, including the use of flexible cords and cable fittings, non-metallic cable glands, and armored cable fittings. Proper selection of fittings is crucial to match the cable type and installation environment, ensuring durability and preventing physical damage. Tools such as the Blackburn® Comfort Crimp® and HEX-FLEX® systems enhance installation efficiency and reliability, reducing labor time and ensuring secure connections.

What accessories are available for Thomas and Betts products?

Thomas and Betts offers a comprehensive range of accessories for their products, including various cord and cable fittings, non-metallic cable glands, service entrance cable fittings, and armored cable fittings. Their accessories are designed to enhance installation efficiency and ensure compatibility with different cable types and environmental conditions, providing reliable connections for a wide array of applications.

What environmental ratings do Thomas and Betts products have?

Thomas and Betts products feature robust environmental ratings, including NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications, as well as IEC 60529 IP66 protection. These ratings ensure that their products are designed to withstand harsh industrial environments, with capabilities to resist dust, water, and corrosion, and operate effectively in a wide temperature range.

What communication protocols do Thomas and Betts products support?

Thomas and Betts products support a wide range of industrial communication protocols, including Ethernet, DeviceNet, PROFIBUS, Modbus, CANopen, and others. This extensive compatibility ensures seamless integration and reliable communication across various industrial automation systems, catering to diverse application needs.

What are the key features of Thomas and Betts products?

Thomas and Betts products are known for their innovative designs, high performance, and compliance with industry standards such as the National Electrical Code and Underwriters' Laboratories. They offer a comprehensive range of rugged and reliable electrical fittings, including liquidtight and dust-tight connections, which enhance installation efficiency and reduce overall project costs. Their products are engineered for durability in harsh environments, ensuring long-term reliability and lower installed costs.

What are the main product lines offered by Thomas and Betts?

Thomas and Betts offers a comprehensive range of product lines including electrical connectors, cable management systems, grounding and bonding solutions, and industrial automation components. Their products are designed for durability and reliability in demanding industrial environments, ensuring optimal performance and safety across various applications.

What technical support does Thomas and Betts offer?

Thomas and Betts offers comprehensive technical support, including access to field application engineers for onsite training and installation assistance. Their technical support staff is available to address inquiries related to product specifications and installation practices, ensuring optimal performance and safety of electrical systems. Additionally, they provide a variety of training programs to enhance the knowledge and skills of users in the field.

What industries and applications are Thomas and Betts products used for?

Thomas and Betts products are utilized across various industries including electrical construction, industrial automation, telecommunications, and utilities. Their extensive range of cord and cable fittings, electrical boxes, and metal framing systems are designed for applications that require durability and reliability in harsh environments, ensuring optimal performance in both permanent and temporary installations.

What certifications and standards do Thomas and Betts products comply with?

Thomas and Betts products comply with critical international certifications including UL (Underwriters Laboratories), CSA (Canadian Standards Association), and CE (European Community). Our products are designed to meet rigorous industrial standards such as NEMA enclosure ratings and IEC 60529 IP ratings, ensuring safety and reliability across various industrial applications.

What are the main product lines offered by Ocal?

Ocal offers a comprehensive range of corrosion-resistant conduit systems, including PVC-coated conduit and fittings, conduit bodies, hazardous location fittings, and strut accessories. Their products are designed to provide superior corrosion protection, featuring a hot-dipped galvanizing process and UL listed Type 4X PVC-coated conduit bodies, ensuring durability in the most demanding environments.