Authorized ABB Distributor (Installation Products)
ABB - Installation Products 3701A3(1)-H - 200 Amp, 35kV Loadbreak Bushing Insert, Includes internal torquing feature using 200AT Assembly Tool. Includes a black vent ring.

ABB Installation Products 3701A3(1)-H 200 Amp, 35kV Loadbreak Bushing Insert, Includes internal torquing feature using 200AT…

UPC: 783786423439


Documents & Media
Installation InstructionsSpecification SheetManufacturer Product Website

Contact for Pricing

Minimum Qty: 10

Multiplier: 10

*Contact for lower quantities*

Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.

Overview

The ABB 3701A3(1)-H Loadbreak Bushing Insert is a 35kV, 200 Amp-rated component engineered for medium-voltage electrical connections in pad-mounted transformers, switchgear, and underground distribution systems. This bushing insert meets ANSI/IEEE Standard 386 and is rated for both single-phase and three-phase applications, ensuring compatibility with standard ANSI bushing wells and Elastimold universal bushing wells. Key specifications include a maximum phase-to-ground operating voltage of 21.1kV, phase-to-phase voltage of 36.6kV, and a basic impulse insulation level (BIL) of 150kV. The insert supports continuous and loadbreak currents up to 200 Amps, with a momentary and fault close rating of 10kA symmetrical for 10 cycles. Additional ratings include a 50kV AC one-minute withstand, 103kV DC 15-minute withstand, and 26kV AC corona extinction at 3pC sensitivity. Engineered for reliability, the 3701A3(1)-H features an internal torquing mechanism compatible with the ABB 200AT Assembly Tool, ensuring precise torque application during installation to prevent over-tightening or under-tightening. The included black vent ring enhances pressure relief and moisture management, critical for maintaining dielectric integrity in outdoor or harsh environments. The peroxide-cured insulation and jacket provide long-term durability, while the provision for ground wire connection ensures proper grounding. Ideal for applications requiring frequent switching or maintenance, this bushing insert integrates seamlessly with existing infrastructure, reducing downtime and operational risks. Its compact black design and compatibility with shielded cable connections make it a cost-effective solution for utilities, industrial facilities, and commercial installations where safety and efficiency are paramount.
  • 35kV, 200 Amp loadbreak rated for single-phase and three-phase applications
  • Meets ANSI/IEEE Standard 386 with 21.1kV phase-to-ground and 36.6kV phase-to-phase voltage ratings
  • 150kV BIL, 50kV AC one-minute withstand, and 103kV DC 15-minute withstand ratings
  • Internal torquing feature compatible with ABB 200AT Assembly Tool for precise installation
  • Includes black vent ring for pressure relief and moisture management in harsh environments

Specifications

Application
35 kV, 200 Amps
Temperature Rating, Maximum
149 F
Temperature Rating, Maximum
65 C
Temperature Rating, Minimum
-4 F
Temperature Rating, Minimum
-20 C
Type
Bushing Insert
Package Dimensions (L x W x H)
0.01 IN x 0.01 IN x 0.01 IN
Package Dimensions (L x W x H)
0.0254 cm x 0.0254 cm x 0.0254 cm
Package Weight (Imperial)
3.5000 L
Package Weight (Metric)
1.5880 kg
15/25kV, T-Splice 6-3/4 inch Long Bail Assembly, Made of Stainless Steel, Used for Assisting Cable to Transformer Connections. Non-Current Carrying. The 150TB2 bailing assembly kit consists of a modified hold down bail for securing Elastimold® tee splice K150T to a K150DP Deadbreak insulating plug. This assembly provides positive hold down force between the tee splice and the insulating plug.

150-TB-2

15/25kV, T-Splice 6-3/4 inch Long Bail Assembly, Made of Stainless Steel, Used for Assisting Cable to Transformer Connections. Non-Current Carrying. The 150TB2 bailing assembly kit consists of a modified hold down bail for securing Elastimold® tee splice K150T to a K150DP Deadbreak insulating plug. This assembly provides positive hold down force between the tee splice and the insulating plug.
HMI door mounting kit with 15M cable

181B2258

HMI door mounting kit with 15M cable
Polarizing Cover / Hermaphroditic Cover, Black, Nylon, 8 Position, AMPMODU IV/V

103350-4

Polarizing Cover / Hermaphroditic Cover, Black, Nylon, 8 Position, AMPMODU IV/V
15/25kv, Long Shank Well with Bail Tabs and With Replaceable Well Stud (9-1/4 inch Bushing Shank Length), H option

K1601-PC-T1R-H

15/25kv, Long Shank Well with Bail Tabs and With Replaceable Well Stud (9-1/4 inch Bushing Shank Length), H option
900 Amp, 15kV, Loadbreak Elbow Tap Plug, Factory assembled Stud, which is not field removable. Copper.

675ETPSP

900 Amp, 15kV, Loadbreak Elbow Tap Plug, Factory assembled Stud, which is not field removable. Copper.
35 kV, 600 Series Deadbreak Insulated Parking Bushing with Stud and Universal Bracket and EyeBolt, Stand-Off Plug. Length 5.062 inch, Widest Diameter 3 inch. Epoxy.

750SOPS

35 kV, 600 Series Deadbreak Insulated Parking Bushing with Stud and Universal Bracket and EyeBolt, Stand-Off Plug. Length 5.062 inch, Widest Diameter 3 inch. Epoxy.
35kV, 900Amp, Deadbreak/Loadbreak Elbow Tap Plug, use 600ATM assembly tool. Factory assembled Stud, which is not field removable.

775ETPSP

35kV, 900Amp, Deadbreak/Loadbreak Elbow Tap Plug, use 600ATM assembly tool. Factory assembled Stud, which is not field removable.
2 Hole Spade for MTG, includes Spade contact, ground strap and rain cap. Cable Insulation Diameter 1.095 inch to 1.240 inch. Conductor Size KCMIL Stranded 500 /Solid 600.

35MTGA-HB500-3

2 Hole Spade for MTG, includes Spade contact, ground strap and rain cap. Cable Insulation Diameter 1.095 inch to 1.240 inch. Conductor Size KCMIL Stranded 500 /Solid 600.

Frequently Asked Questions

What is the voltage rating of the 3701A3(1)-H?

The device has a voltage rating of 35 kilovolts (kV).

What is the current rating of the bushing insert?

The bushing insert supports a continuous current rating of 200 Amperes (A).

Does the insert include a torquing feature?

Yes, the 3701A3(1)-H includes an internal torquing feature designed for use with the 200AT Assembly Tool.

What is the purpose of the black vent ring?

The black vent ring provides pressure relief and moisture management to maintain dielectric integrity during operation.

Is the 3701A3(1)-H compatible with standard bushing wells?

Yes, the loadbreak bushing insert is designed for compatibility with standard bushing wells in medium-voltage systems.

How to Install the 3701A3(1)-H Loadbreak Bushing Insert

Instructions for installing the 3701A3(1)-H Loadbreak Bushing Insert into apparatus bushing wells.

Estimated time: 30m

Tools needed:

Screwdriver (for grounding wire loop), Wire strippers (for grounding wire)

Supplies needed:

Lubricant (supplied), Copper wire (No. 14 AWG or equivalent), Suitable connector (for system ground), Insulated cap or grounding elbow connector (if not immediately mating)

  1. Prepare the bushing insert and apparatus

    DANGER: All apparatus must be de-energized before proceeding. Inspect the apparatus bushing well to ensure it is dry and free from contaminants. Remove the protective shipping cap from the bushing insert. Lubricate the bushing well interface area of the bushing insert with the supplied lubricant. DO NOT SUBSTITUTE lubricant.

  2. Install the bushing insert

    Place the lubricated portion of the bushing insert into the apparatus bushing well. Hand tighten the bushing insert in a clockwise direction until it bottoms.

  3. Connect the electrostatic grounding wire

    Push a length of copper wire (No. 14 AWG or equivalent) through one of the grounding tabs on the bushing insert. Make a small loop and twist it tight, taking care not to damage the grounding tab. Connect the free end of the electrostatic grounding wire to the system ground using a suitable connector. Ensure the grounding wire does not contact the bushing interface or interfere with nearby components.

  4. Complete the installation and mating

    Thoroughly wipe the bushing insert and mating product interface clean of any contaminants and lubricate with the supplied lubricant. Install the mating products to the bushing insert following their respective instructions. If the bushing insert is not to be immediately mated, replace the shipping cover. Do not energize or submerge the apparatus with the shipping cap on; it is for protection only and is not insulated or watertight.

Frequently Asked Questions about ABB - Installation Products

How are Thomas and Betts products typically installed?

Thomas and Betts products are installed using a variety of methods tailored to specific applications, including the use of flexible cords and cable fittings, non-metallic cable glands, and armored cable fittings. Proper selection of fittings is crucial to match the cable type and installation environment, ensuring durability and preventing physical damage. Tools such as the Blackburn® Comfort Crimp® and HEX-FLEX® systems enhance installation efficiency and reliability, reducing labor time and ensuring secure connections.

What accessories are available for Thomas and Betts products?

Thomas and Betts offers a comprehensive range of accessories for their products, including various cord and cable fittings, non-metallic cable glands, service entrance cable fittings, and armored cable fittings. Their accessories are designed to enhance installation efficiency and ensure compatibility with different cable types and environmental conditions, providing reliable connections for a wide array of applications.

What environmental ratings do Thomas and Betts products have?

Thomas and Betts products feature robust environmental ratings, including NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications, as well as IEC 60529 IP66 protection. These ratings ensure that their products are designed to withstand harsh industrial environments, with capabilities to resist dust, water, and corrosion, and operate effectively in a wide temperature range.

What communication protocols do Thomas and Betts products support?

Thomas and Betts products support a wide range of industrial communication protocols, including Ethernet, DeviceNet, PROFIBUS, Modbus, CANopen, and others. This extensive compatibility ensures seamless integration and reliable communication across various industrial automation systems, catering to diverse application needs.

What are the key features of Thomas and Betts products?

Thomas and Betts products are known for their innovative designs, high performance, and compliance with industry standards such as the National Electrical Code and Underwriters' Laboratories. They offer a comprehensive range of rugged and reliable electrical fittings, including liquidtight and dust-tight connections, which enhance installation efficiency and reduce overall project costs. Their products are engineered for durability in harsh environments, ensuring long-term reliability and lower installed costs.

What are the main product lines offered by Thomas and Betts?

Thomas and Betts offers a comprehensive range of product lines including electrical connectors, cable management systems, grounding and bonding solutions, and industrial automation components. Their products are designed for durability and reliability in demanding industrial environments, ensuring optimal performance and safety across various applications.

What technical support does Thomas and Betts offer?

Thomas and Betts offers comprehensive technical support, including access to field application engineers for onsite training and installation assistance. Their technical support staff is available to address inquiries related to product specifications and installation practices, ensuring optimal performance and safety of electrical systems. Additionally, they provide a variety of training programs to enhance the knowledge and skills of users in the field.

What industries and applications are Thomas and Betts products used for?

Thomas and Betts products are utilized across various industries including electrical construction, industrial automation, telecommunications, and utilities. Their extensive range of cord and cable fittings, electrical boxes, and metal framing systems are designed for applications that require durability and reliability in harsh environments, ensuring optimal performance in both permanent and temporary installations.

What certifications and standards do Thomas and Betts products comply with?

Thomas and Betts products comply with critical international certifications including UL (Underwriters Laboratories), CSA (Canadian Standards Association), and CE (European Community). Our products are designed to meet rigorous industrial standards such as NEMA enclosure ratings and IEC 60529 IP ratings, ensuring safety and reliability across various industrial applications.

What are the main product lines offered by Ocal?

Ocal offers a comprehensive range of corrosion-resistant conduit systems, including PVC-coated conduit and fittings, conduit bodies, hazardous location fittings, and strut accessories. Their products are designed to provide superior corrosion protection, featuring a hot-dipped galvanizing process and UL listed Type 4X PVC-coated conduit bodies, ensuring durability in the most demanding environments.