Authorized ABB Distributor (Installation Products)
ABB - Installation Products 58526 - Copper Two-Way Splice, Long Barrel, Wire Size 900 kcmil, Length 5.5 Inches, Tin Plated, Die Code 115, Die Color Code Yellow

ABB Installation Products 58526 Copper Two-Way Splice, Long Barrel, Wire Size 900 kcmil, Length 5.5 Inches, Tin Plated…

UPC: 786210585260

Documents & Media
Installation InstructionsSpecification SheetManufacturer Product Website

Contact for Pricing

Minimum Qty: 3

Multiplier: 3

*Contact for lower quantities*

Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.

Overview

The ABB Copper Two-Way Splice, SKU 58526, is engineered for robust electrical connections in demanding industrial environments. This long barrel splice is constructed from high-strength copper, tin-plated to inhibit corrosion and ensure reliable conductivity. It is specifically designed for stranded copper conductors up to 900 kcmil, featuring a 5.5-inch overall length for ample crimping surface and superior wire pull-out strength. The internal wire stop prevents over-insertion of conductors, ensuring a secure and consistent termination. This splice is marked with Die Code 115, color-coded yellow for easy identification and compatibility with specified crimping tools and dies, including Panduit and competitor systems. It is UL Listed and CSA Certified to 35 kV and temperature rated to 90°C when crimped with appropriate tools and dies, meeting stringent performance standards for power distribution, industrial machinery, and complex electrical installations. The long barrel design maximizes the number of crimps, contributing to premium electrical performance and mechanical integrity. This splice is tested by Telcordia to meet NEBS Level 3 and is American Bureau of Shipping approved, underscoring its suitability for critical applications. Ensure proper crimping with Panduit® Uni-Die™ Dieless Crimping Tools or specified competitor tools and dies for optimal results.
  • Constructed from high-strength, tin-plated copper for corrosion resistance and conductivity.
  • Long barrel design maximizes crimps for superior wire pull-out strength and electrical performance.
  • Accommodates stranded copper conductors up to 900 kcmil.
  • Internal wire stop prevents over-insertion of conductors.
  • Die Code 115 (Yellow) for easy identification and compatibility with specified crimping tools.

Specifications

Application
Applications certified to 600 V and recommended up to 35 kVÂ¥
Application
Applications certified to 600 V and recommended up to 35 kV¥
Color
Yellow
Conductor Range
900 kcmil
Finish
Tin-Plated
Material
Copper
Special Features
Two-way connectors provide high pullout values, are easy to insulate and provide a low-resistance connection of high quality and low installed cost
Standard
UL E9809
Standard
UL E9809 / UL E9809
Type
Splice Connector
Voltage Rating
600 V
Package Dimensions (L x W x H)
4 IN x 4 IN x 3 IN
Package Dimensions (L x W x H)
10.16 cm x 10.16 cm x 7.62 cm
Package Weight (Imperial)
1.270 L
Package Weight (Metric)
0.576 kg
Nylon-Insulated Butt Splice, Length 1.26 Inches, Width .28 Inches, Maximum Insulation Diameter .210, Wire Range #12-#10 AWG, Color Yellow, Copper, Tin Plated

2RC10

Nylon-Insulated Butt Splice, Length 1.26 Inches, Width .28 Inches, Maximum Insulation Diameter .210, Wire Range #12-#10 AWG, Color Yellow, Copper, Tin Plated
2 Hole Long Barrel Copper Stacked Compression Lug 250 MCM - 1/2" Bolt Long Barrel Copper Stacked Compression Lugs is a type of copper compression connector that is produced from high conductivity copper tubing. They are designed for use with the L-N series. They are tin-plated to provide corrosion resistance and are marked with die index and color coded for easy reference.

SL250N

2 Hole Long Barrel Copper Stacked Compression Lug 250 MCM - 1/2" Bolt Long Barrel Copper Stacked Compression Lugs is a type of copper compression connector that is produced from high conductivity copper tubing. They are designed for use with the L-N series. They are tin-plated to provide corrosion resistance and are marked with die index and color coded for easy reference.
Panduit BSK10-D Kynar Insulated Butt Splice

BSK10-D

Panduit BSK10-D Kynar Insulated Butt Splice
Copper Two-Way Splice, Long Barrel, Max 35kV, Wire Size #8 AWG, Length 1.75 Inches, Diameter 0.27 Inch, Tin Plated, Die Code 21, Die Color Code Red

54804

Copper Two-Way Splice, Long Barrel, Max 35kV, Wire Size #8 AWG, Length 1.75 Inches, Diameter 0.27 Inch, Tin Plated, Die Code 21, Die Color Code Red
Copper Two-Way Splice, Long Barrel, Max 35kV, Wire Size #6 AWG, Length 1.75 Inches, Diameter 0.31 Inches, Tin Plated, Die Code 24, Die Color Code Blue

54805

Copper Two-Way Splice, Long Barrel, Max 35kV, Wire Size #6 AWG, Length 1.75 Inches, Diameter 0.31 Inches, Tin Plated, Die Code 24, Die Color Code Blue
Copper Two-Way Splice, Long Barrel, Max 35kV, Wire Size #4 AWG, Length 1.75 Inches, Diameter 0.39 Inches, Tin Plated, Die Code 29, Die Color Code Gray

54806

Copper Two-Way Splice, Long Barrel, Max 35kV, Wire Size #4 AWG, Length 1.75 Inches, Diameter 0.39 Inches, Tin Plated, Die Code 29, Die Color Code Gray
Copper Two-Way Splice, Long Barrel, Max 35kV, Wire Size #2 AWG, Length 1.88 Inches, Diameter 0.43 Inches, Tin Plated, Die Code 33, Die Color Code Brown

54807

Copper Two-Way Splice, Long Barrel, Max 35kV, Wire Size #2 AWG, Length 1.88 Inches, Diameter 0.43 Inches, Tin Plated, Die Code 33, Die Color Code Brown
Copper Two-Way Splice, Long Barrel, Max 35kV, Wire Size 1 AWG, Length 2.0 Inches, Diameter 0.49 Inch, Tin Plated, Die Code 37, Die Color Code Green

54808

Copper Two-Way Splice, Long Barrel, Max 35kV, Wire Size 1 AWG, Length 2.0 Inches, Diameter 0.49 Inch, Tin Plated, Die Code 37, Die Color Code Green

How to Install the 58526 Two Way Splicer

Instructions for installing the 58526 Copper Color-Keyed Long Barrel Two Way Splicer for 600V applications.

Estimated time: 15m

Tools needed:

Wire strippers, Wire brush or emery cloth, Crimping tool (appropriate die)

Supplies needed:

58526 Two Way Splicer, Insulating method (e.g., shrink tubing, adhesive pad)

  1. Prepare the cable

    Strip the insulation from the cable to the length specified in the product's table. Ensure the cable strands are not nicked and the cable end is clean. Use a wire brush or emery cloth if necessary.

  2. Insert cable into connector

    Insert the prepared cable end into the 58526 connector until it stops.

  3. Crimp the connector

    Insert the connector into the appropriate die on your crimping tool. Compress the connector between the markings according to the number of compressions specified for your connector and die combination. Ensure you are using the correct installing die as specified in the product's table. WARNING: DO NOT CRIMP ON ENERGIZED WIRES.

  4. Finish the connection

    After crimping, remove any sharp edges, flash, or burrs from the connection. Apply the appropriate insulating method as shown in the product's table.

Frequently Asked Questions about ABB - Installation Products

How are Thomas and Betts products typically installed?

Thomas and Betts products are installed using a variety of methods tailored to specific applications, including the use of flexible cords and cable fittings, non-metallic cable glands, and armored cable fittings. Proper selection of fittings is crucial to match the cable type and installation environment, ensuring durability and preventing physical damage. Tools such as the Blackburn® Comfort Crimp® and HEX-FLEX® systems enhance installation efficiency and reliability, reducing labor time and ensuring secure connections.

What accessories are available for Thomas and Betts products?

Thomas and Betts offers a comprehensive range of accessories for their products, including various cord and cable fittings, non-metallic cable glands, service entrance cable fittings, and armored cable fittings. Their accessories are designed to enhance installation efficiency and ensure compatibility with different cable types and environmental conditions, providing reliable connections for a wide array of applications.

What environmental ratings do Thomas and Betts products have?

Thomas and Betts products feature robust environmental ratings, including NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications, as well as IEC 60529 IP66 protection. These ratings ensure that their products are designed to withstand harsh industrial environments, with capabilities to resist dust, water, and corrosion, and operate effectively in a wide temperature range.

What communication protocols do Thomas and Betts products support?

Thomas and Betts products support a wide range of industrial communication protocols, including Ethernet, DeviceNet, PROFIBUS, Modbus, CANopen, and others. This extensive compatibility ensures seamless integration and reliable communication across various industrial automation systems, catering to diverse application needs.

What are the key features of Thomas and Betts products?

Thomas and Betts products are known for their innovative designs, high performance, and compliance with industry standards such as the National Electrical Code and Underwriters' Laboratories. They offer a comprehensive range of rugged and reliable electrical fittings, including liquidtight and dust-tight connections, which enhance installation efficiency and reduce overall project costs. Their products are engineered for durability in harsh environments, ensuring long-term reliability and lower installed costs.

What are the main product lines offered by Thomas and Betts?

Thomas and Betts offers a comprehensive range of product lines including electrical connectors, cable management systems, grounding and bonding solutions, and industrial automation components. Their products are designed for durability and reliability in demanding industrial environments, ensuring optimal performance and safety across various applications.

What technical support does Thomas and Betts offer?

Thomas and Betts offers comprehensive technical support, including access to field application engineers for onsite training and installation assistance. Their technical support staff is available to address inquiries related to product specifications and installation practices, ensuring optimal performance and safety of electrical systems. Additionally, they provide a variety of training programs to enhance the knowledge and skills of users in the field.

What industries and applications are Thomas and Betts products used for?

Thomas and Betts products are utilized across various industries including electrical construction, industrial automation, telecommunications, and utilities. Their extensive range of cord and cable fittings, electrical boxes, and metal framing systems are designed for applications that require durability and reliability in harsh environments, ensuring optimal performance in both permanent and temporary installations.

What certifications and standards do Thomas and Betts products comply with?

Thomas and Betts products comply with critical international certifications including UL (Underwriters Laboratories), CSA (Canadian Standards Association), and CE (European Community). Our products are designed to meet rigorous industrial standards such as NEMA enclosure ratings and IEC 60529 IP ratings, ensuring safety and reliability across various industrial applications.

What are the main product lines offered by Ocal?

Ocal offers a comprehensive range of corrosion-resistant conduit systems, including PVC-coated conduit and fittings, conduit bodies, hazardous location fittings, and strut accessories. Their products are designed to provide superior corrosion protection, featuring a hot-dipped galvanizing process and UL listed Type 4X PVC-coated conduit bodies, ensuring durability in the most demanding environments.