Contact for Pricing
Minimum Qty: 10
Multiplier: 10
*Contact for lower quantities*
Overview
- 3/8 Inch Liquidtight Fitting for Flexible Metallic Conduit
- 45 Degree Angle for Efficient Cable Management
- 316 Stainless Steel Construction for Superior Corrosion Resistance
- High UV Resistance for Outdoor Durability
- NEMA 3, 3R, 4, 4X Ratings for Environmental Protection
Specifications
Application | Connects Flexible Metallic Liquidtight Conduit to a Box or Enclosure |
Color | Metallic |
Declaration of Conformity - CE | 9AKK107492A9907 |
Finish | None |
Insulation | True |
Material | 316 Stainless Steel with Duraplated Ground Cone |
NEMA Rating | 3;3R;4;4X |
Size | 3/8 Inch |
Special Features | Stronger and More UV-resistant than Nonmetallic Fittings |
Temperature Rating, Maximum | 302 F |
Temperature Rating, Maximum | 150 C |
Temperature Rating, Minimum | 302 F |
Temperature Rating, Minimum | 150 C |
Type | 45 Degree Fitting for Flexible Metallic Conduit |
Package Dimensions (L x W x H) | 6 IN x 4.5 IN x 4 IN |
Package Dimensions (L x W x H) | 15.24 cm x 11.43 cm x 10.16 cm |
Package Weight (Imperial) | 0.1700 L |
Package Weight (Metric) | 0.0770 kg |
XQAS0505
Liquid Tight Fitting for Covered Conduit, Straight with External Male Thread, Conduit Size 25mm, 3/4 Inch NPT Thread, Very High Mechanical and UV Protection, IP66, IP67 Ratings, Stainless Steel AISI 316L, Nylon Seals5346SST6
1-1/2 Inch Liquidtight Fitting for Flexible Metallic Conduit, 45 Degree, UL/CSA Listed, High UV Resistance, NEMA Ratings: 3, 3R, 4, 4X, Length 4.34 Inches/110.24mm, Width 2.56 Inches/65.02mm, Height 3.21 Inches/81.53mm, Temperature Range 0 to 105 Degrees C, 316 Stainless Steel with Duraplated Ground Cone5342SST6HT
1/2 Inch Liquidtight Fitting for Flexible Metallic Conduit, 45 Degree, High UV Resistance, NEMA Ratings: 3, 3R, 4, 4X, Length 2.37 Inches/60.20mm, Width 1.33 Inches/33.78mm, Height 1.76 Inches/44.70mm, Temperature Range 0 to 150 Degrees C, 316 Stainless Steel with Duraplated Ground Cone5347SST6
2 Inch Liquidtight Fitting for Flexible Metallic Conduit, 45 Degree, UL/CSA Listed, High UV Resistance, NEMA Ratings: 3, 3R, 4, 4X, Length 5.00 Inches/127.00mm, Width 3.05 Inches/77.47mm, Height 3.85 Inches/97.76mm, Temperature Range 0 to 105 Degrees C, 316 Stainless Steel with Duraplated Ground Cone5343SST6HT
3/4 Inch Liquidtight Fitting for Flexible Metallic Conduit, 45 Degree, High UV Resistance, NEMA Ratings: 3, 3R, 4, 4X, Length 2.70 Inches/68.58mm, Width 1.64 Inches/41.66mm, Height 2.10 Inches/53.34mm, Temperature Range 0 to 150 Degrees C, 316 Stainless Steel with Duraplated Ground Cone5344SST6HT
1 Inch Liquidtight Fitting for Flexible Metallic Conduit, 45 Degree, High UV Resistance, NEMA Ratings: 3, 3R, 4, 4X, Length 3.32 Inches/84.33mm, Width 1.87 Inches/47.50mm, Height 2.40 Inches/60.96mm, Temperature Range 0 to 150 Degrees C, 316 Stainless Steel with Duraplated Ground Cone5345SST6HT
1-1/4 Inch Liquidtight Fitting for Flexible Metallic Conduit, 45 Degree, High UV Resistance, NEMA Ratings: 3, 3R, 4, 4X, Length 3.90 Inches/99.06mm, Width 2.25 Inches/57.15mm, Height 2.86 Inches/72.64mm, Temperature Range 0 to 150 Degrees C, 316 Stainless Steel with Duraplated Ground Cone
5351SST6
3/8 Inch Liquidtight Fitting for Flexible Metallic Conduit, 90 Degree, UL/CSA Listed, High UV Resistance, NEMA Ratings: 3, 3R, 4, 4X, Length 2.14 Inches/54.36mm, Width 1.14 Inches/28.96mm, Height 1.87 Inches/47.50mm, Temperature Range 0 to 105 Degrees C, 316 Stainless Steel with Duraplated Ground ConeFrequently Asked Questions
What are the size ranges for high-temperature liquidtight fittings?
High-temperature fittings are available in 3/8 in to 4 in for Straight styles and 3/8 in to 2 in for 45° & 90° styles.
Is disassembly required for Steel Quick-Connect™ fittings during installation?
No, Steel Quick-Connect™ fittings feature an innovative labor-saving design that requires no disassembly for installation.
Are the new 316 stainless steel fittings insulated?
Yes, the new 316 stainless steel fittings are available as Insulated Only.
What styles are available for 316 stainless steel liquidtight fittings?
The 316 stainless steel liquidtight fittings are available in Straight, 45°, and 90° styles.
What is the size range for the new 316 stainless steel fittings?
The new 316 stainless steel fittings are available in a size range from 3/8 in to 2 in.
What material are the new T&B liquidtight fittings made from?
The new T&B liquidtight fittings are manufactured from 316 stainless steel, offering superior corrosion resistance.
What is the maximum temperature rating for high-temperature fittings?
High-temperature liquidtight fittings are designed for extreme temperatures up to 150° C.
Is disassembly required for Steel Quick-Connect™ fittings during installation?
No, Steel Quick-Connect™ fittings feature an innovative labor-saving design that requires no disassembly for installation.
What is the maximum temperature rating for high-temperature fittings?
High-temperature liquidtight fittings are designed for extreme temperatures up to 150° C.
What is the size range for the new 316 stainless steel fittings?
The new 316 stainless steel fittings are available in a size range from 3/8 in to 2 in.
How to Install the 5341SST6HT Liquid-Tight Flexible Metallic Conduit Fitting
This guide provides step-by-step instructions for properly installing the 5341SST6HT stainless steel liquid-tight fitting onto flexible metallic conduit and securing it to a box wall, ensuring a liquid-tight and dust-tight connection.
Estimated time: 15m
Tools needed:
Hacksaw, Standard Screwdriver, Hammer, Torque Wrench
Supplies needed:
Liquid-tight flexible metallic conduit, Seal Gasket (e.g., 5261 for 3/8" NPT), Stainless Steel Locknut (e.g., LNSS/038 for 3/8" NPT)
- Prepare the Flexible Metallic Conduit
Cut the end of the flexible metallic conduit with a clean, square cut. Use a metal jig or a sharp hacksaw with 32 teeth/inch. For high production, use a power band saw with 24-32 teeth/inch at no more than 400 feet/minute. DO NOT use an abrasive wheel for cutting.
- Assemble Fitting Components onto Conduit
Slide the gland nut onto the cut end of the flexible conduit. Next, slide the nylon sealing ring onto the conduit. Finally, thread the SAFE-EDGE® ground cone into the conduit end.
- Mount Fitting to Box Wall
Insert the assembled fitting through the knockout hole in the box wall. Ensure the seal gasket (e.g., Part No. 5261 for 3/8" NPT) is positioned between the fitting body and the exterior of the box wall for liquid-tight and dust-tight installations. From the inside of the box, thread the stainless steel locknut (e.g., Part No. LNSS/038 for 3/8" NPT) onto the fitting.
- Secure Locknut
Hand-tighten the locknut against the box wall. Then, further tighten the locknut by an additional 1/4 turn using a hammer and a standard screwdriver, or an equivalent method, to ensure a secure connection.
- Tighten Gland Nut
Tighten the gland nut to the UL recommended torque value. For the 5341SST6HT (3/8" NPT) fitting, tighten to 235 lb-in (26.6 N-m) to achieve a liquid-tight seal.
Frequently Asked Questions about ABB - Installation Products
How are Thomas and Betts products typically installed?
Thomas and Betts products are installed using a variety of methods tailored to specific applications, including the use of flexible cords and cable fittings, non-metallic cable glands, and armored cable fittings. Proper selection of fittings is crucial to match the cable type and installation environment, ensuring durability and preventing physical damage. Tools such as the Blackburn® Comfort Crimp® and HEX-FLEX® systems enhance installation efficiency and reliability, reducing labor time and ensuring secure connections.
What accessories are available for Thomas and Betts products?
Thomas and Betts offers a comprehensive range of accessories for their products, including various cord and cable fittings, non-metallic cable glands, service entrance cable fittings, and armored cable fittings. Their accessories are designed to enhance installation efficiency and ensure compatibility with different cable types and environmental conditions, providing reliable connections for a wide array of applications.
What environmental ratings do Thomas and Betts products have?
Thomas and Betts products feature robust environmental ratings, including NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications, as well as IEC 60529 IP66 protection. These ratings ensure that their products are designed to withstand harsh industrial environments, with capabilities to resist dust, water, and corrosion, and operate effectively in a wide temperature range.
What communication protocols do Thomas and Betts products support?
Thomas and Betts products support a wide range of industrial communication protocols, including Ethernet, DeviceNet, PROFIBUS, Modbus, CANopen, and others. This extensive compatibility ensures seamless integration and reliable communication across various industrial automation systems, catering to diverse application needs.
What are the key features of Thomas and Betts products?
Thomas and Betts products are known for their innovative designs, high performance, and compliance with industry standards such as the National Electrical Code and Underwriters' Laboratories. They offer a comprehensive range of rugged and reliable electrical fittings, including liquidtight and dust-tight connections, which enhance installation efficiency and reduce overall project costs. Their products are engineered for durability in harsh environments, ensuring long-term reliability and lower installed costs.
What are the main product lines offered by Thomas and Betts?
Thomas and Betts offers a comprehensive range of product lines including electrical connectors, cable management systems, grounding and bonding solutions, and industrial automation components. Their products are designed for durability and reliability in demanding industrial environments, ensuring optimal performance and safety across various applications.
What technical support does Thomas and Betts offer?
Thomas and Betts offers comprehensive technical support, including access to field application engineers for onsite training and installation assistance. Their technical support staff is available to address inquiries related to product specifications and installation practices, ensuring optimal performance and safety of electrical systems. Additionally, they provide a variety of training programs to enhance the knowledge and skills of users in the field.
What industries and applications are Thomas and Betts products used for?
Thomas and Betts products are utilized across various industries including electrical construction, industrial automation, telecommunications, and utilities. Their extensive range of cord and cable fittings, electrical boxes, and metal framing systems are designed for applications that require durability and reliability in harsh environments, ensuring optimal performance in both permanent and temporary installations.
What certifications and standards do Thomas and Betts products comply with?
Thomas and Betts products comply with critical international certifications including UL (Underwriters Laboratories), CSA (Canadian Standards Association), and CE (European Community). Our products are designed to meet rigorous industrial standards such as NEMA enclosure ratings and IEC 60529 IP ratings, ensuring safety and reliability across various industrial applications.
What are the main product lines offered by Ocal?
Ocal offers a comprehensive range of corrosion-resistant conduit systems, including PVC-coated conduit and fittings, conduit bodies, hazardous location fittings, and strut accessories. Their products are designed to provide superior corrosion protection, featuring a hot-dipped galvanizing process and UL listed Type 4X PVC-coated conduit bodies, ensuring durability in the most demanding environments.