ABB Installation Products 376LR-L5260 35 kv, 200 Amp, Loadbreak Elbow Connector with Test Point, Cable Insulation Diameter…
UPC: 075114276597
Contact for Pricing
Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.
Overview
- 35 kV Voltage Rating
- 200 Amp Current Rating
- Integrated Test Point for safe testing
- Bi-Metal Compression Lug for secure connection
- Accommodates cable insulation diameters from 1.180" to 1.465"
Specifications
Amperage Rating | 200 A |
Application | 35 kv, 200 Amp |
Color | Black |
Conductor Range | 3/0 STR/COMPR AWG , 4/0 SOL/COMPT AWG |
Connection | Push-In |
Environmental Conditions | Fully Submersible |
Insulation | True |
Material | Housing - EPDM-Rubber |
Size | Cable Insulation Diameter 1.180 inch to 1.465 inch |
Special Features | 35kV, 200 Amp Loadbreak Elbow. Fully shielded, fully submersible molded rubber housing. 100 percent peroxide-cured construction includes insulation and conductive EPDM materials. Provision for hot stick operation. Provision for ground wire connection. Non-Corrosive Capacitive Voltage Test Point |
Standard | ANSI/IEEE Standard 386 |
Temperature Rating, Maximum | 149 F |
Temperature Rating, Maximum | 65 C |
Temperature Rating, Minimum | -40 F |
Temperature Rating, Minimum | -40 C |
Type | Loadbreak Elbow Connector with Test Point |
Voltage Rating | 35 kV |
Package Dimensions (L x W x H) | 0.01 IN x 0.01 IN x 0.01 IN |
Package Dimensions (L x W x H) | 0.0254 cm x 0.0254 cm x 0.0254 cm |
Package Weight (Imperial) | 1.0000 L |
Package Weight (Metric) | 0.4540 kg |
376LR-J-5260
200 Amp, 35kV, Loadbreak Elbow Connector with Test Point, Cable Insulation Diameter 0.980 inch to 1.180 inch. Bi-Metal Compression Lug, Conductor Size AWG Compressed Stranded 3/0 /Solid 4/0 /mmSquared 85.01.
168RLR-G-5240-S
15 kv, 200 Amp, Loadbreak Elbow, Replacement, Cable Insulation Diameter 0.760 inch to 0.950 inch. Bi-Metal Compression Lug. Conductor Size AWG or kcmil, Compressed Stranded 1/0 /Compacted Solid 2/0. Cold-Shrinkable Jacket Seal Included.376LR-K2260
35kV, 200 Amp, LoadBreak, Elbow Connector with Test Point, Cable Insulation 1.090-1.310 inches, Copper Compression Lug, Conductor Size 3/0 Stranded/Compressed or 4/0 Compact/Solid. No Seal
167ELR-6689-5220-SG3
15kV, 200 Amp, LoadBreak, Repair Elbow Connector/Extended Elbow, Cable Insulation .665-.895 inches, Bi-Metal Compression Lug, Conductor Size #2 Stranded/Compressed or #1 Compact/Solid. Cold-Shrinkable Seal with Copper Braid and Constant Force Spring167ELR-6689-5220
15kV, 200 Amp, LoadBreak, Repair Elbow Connector/Extended Elbow, Cable Insulation .665-.895 inches, Bi-Metal Compression Lug, Conductor Size #2 Stranded/Compressed or #1 Compact/Solid. No Seal376LR-K5240-S
35kV, 200 Amp, LoadBreak, Elbow Connector with Test Point, Cable Insulation 1.090-1.310 inches, Bi-Metal Compression Lug, Conductor Size 1/0 Stranded/Compressed or 2/0 Compact/Solid. With Jacket Seal
273ELR-7495-5250
25kV, 200 Amp, LoadBreak, Repair Elbow Connector/Extended Elbow. Cable Insulation .740-.950 inches, Bi-Metal Compression Lug, Conductor Size 2/0 Stranded/Compressed or 3/0 Compact/Solid. No Seal167ELR-7495-5250
15kV, 200 Amp, LoadBreak, Repair Elbow Connector/Extended Elbow, Cable Insulation .740-.950 inches, Bi-Metal Compression Lug, Conductor Size 2/0 Stranded/Compressed or 3/0 Compact/Solid. No SealFrequently Asked Questions
What is the voltage rating of the 376LR elbow?
The 376LR Loadbreak Elbow is rated for 35kV voltage class, with a maximum phase-to-ground operating voltage of 21.1kV and phase-to-phase of 36.6kV.
What is the impulse withstand rating (BIL)?
The impulse withstand rating (BIL) for the 376LR is 150kV, based on a 1.2 x 50 microsecond wave.
What is the fault close rating?
The 376LR has a 10kA Symmetrical (Sym) rating for 10 Cycles Momentary & Fault Close.
What type of conductors are compatible with the bi-metal lug?
The standard bi-metal compression lug with a universal aluminum barrel is suitable for both copper or aluminum conductors.
What is included in the 376LR elbow kit?
Each kit contains an elbow connector housing, a bi-metal compression lug, a probe, a probe wrench, lubricant, installation instructions, and a crimp chart.
What standards does the 376LR meet?
The 376LR Loadbreak Elbow meets ANSI/IEEE Standard 386, Latest Revision.
Can the 376LR be used with hot stick tools?
Yes, the 376LR includes provisions for energized operation using standard hot stick tools for loadmaking/loadbreak operation and a visible disconnect.
What cable insulation diameters are compatible?
The 376LR allows connection of cables with insulation diameters from .850 inches (21.6mm) to 1.465 inches (37.2mm).
What is the continuous current rating?
The 376LR Loadbreak Elbow has a continuous and loadbreak current rating of 200 Amps.
Can the 376LR connect to other apparatus?
Yes, it has a standard interface for connecting to 35kV, 200 Amp bushing inserts, junctions, and operating accessories. It connects to and operates 35kV Class, 200 Amp distribution apparatus.
How to Install Elastimold 375LR/376LR Loadbreak Elbow Connectors
This guide provides detailed instructions for installing Elastimold 35kV class 200 ampere 375LR (without test point) and 376LR (with test point) Loadbreak Elbow Connectors, covering cable preparation, elbow assembly, grounding, and initial connection.
Estimated time: 1h 30m
Tools needed:
Probe wrench, Crimp tool, Wire brush, Hotstick, Cable cut back template, Wire strippers, Utility knife, Suitable sensing device (for 376LR only)
Supplies needed:
Elastimold 375LR or 376LR Elbow Connector Kit (housing, compression lug, probe, lubricant), UD cable with concentric neutral and extruded insulation shielding, No. 14 AWG / 2.5mm copper wire, Appropriate grounding connector, Silicone grease (for 376LR test point cap)
- Prepare for Installation and Inspect Components
Ensure all apparatus is de-energized before beginning installation. Inspect the contents of the elbow connector package to confirm all parts (Elbow Connector Housing, Compression Lug, Probe, Probe Wrench, Lubricant) are complete and undamaged. Verify proper fit with the cable and/or mating products. Thread the probe into the compression lug by hand to check for resistance; if resistance is encountered before full assembly, replace the damaged component. Have all required tools ready and maintain cleanliness throughout the procedure. DANGER: All apparatus must be de-energized during installation or removal of part(s). Failure to follow these instructions will result in serious or fatal injury.
- Train and Prepare the Cable
Train the UD cable to ease future operation, ensuring a minimum of 20 inches beyond the end of the cable pad mount transformer. Cut the excess cable squarely at the center line of the bushing. Unwrap and bind the concentric neutral wires 8-1/2 inches back from the end of the cable. Remove the shield and insulation from the cable end, cutting squarely and taking care not to nick the conductor. Wire brush bare aluminum conductors and immediately install the compression lug, rotating it to spread inhibitor. Position the compression lug so the contact threaded hole aligns with the bushing bore. Crimp the lug according to the crimp chart, starting at the crimp line mark and rotating 180 degrees for each successive crimp. Carefully wipe excessive inhibitor from the outside of the lug and cable. Remove the insulation shield as shown in the cable cut back template, then bevel the insulation end a maximum of 1/8 inch. Thoroughly clean the insulation to remove all traces of conductive residue. Do not cut or nick insulation during preparation.
- Assemble the Elbow Connector
Lubricate the cable insulation and the inside of the elbow housing with the supplied lubricant; DO NOT SUBSTITUTE other lubricants. Slide the elbow connector onto the cable using a back-and-forth twisting motion, then wipe off any excess grease. Align the elbow with the compression lug's threaded hole. Thread the probe into the lug by hand, ensuring it turns freely for approximately four turns before becoming snug. Tighten the probe with the probe wrench until the wrench bends, indicating proper torque.
- Connect Concentric Neutral to Ground
Insert one end of a separate No. 14 AWG (2.5mm) copper wire or equivalent through the grounding eye on the elbow. Twist it tightly, taking care not to damage the eye. Twist all neutral wires together and connect them to ground using an appropriate connector. Ensure adequate slack in the wires to allow for elbow operation.
- Connect Elbow to Bushing Plug (De-energized)
Lubricate the receptacle portion of the elbow connector and the mating bushing with the supplied lubricant. This step must ONLY be performed if both the transformer and elbow are known to be de-energized. Securely fasten a hotstick to the loadbreak connector pulling eye. Insert the probe tip approximately 2 inches into the bushing, then immediately push the elbow home with a fast, firm, straight motion. Apply sufficient force to engage the internal lock on the elbow connector and bushing interface. DO NOT OPERATE BY HAND. WARNING: Lubricate only if the transformer and elbow are known to be de-energized. Do not operate by hand; use a full insulated hotstick.
- Perform Voltage Test (376LR Only)
If installing a 376LR elbow with a test point, remove the test point cap with a hotstick by peeling it off at an angle. Use a suitable sensing device, specifically designed for separable connectors with capacitive test points, to determine if the cable is energized. Follow the manufacturer's directions for the meter used. After the voltage detection, clean and lubricate the inside surface of the cap with silicone grease and replace it tightly on the test point. WARNING: The voltage test point is a capacitance device and is not directly connected to the conductor. Do not use conventional voltage measuring equipment. Contamination, moisture, dirt, or incorrect equipment can provide a false 'no voltage' indication. Treat the elbow as energized until the 'no voltage' test point indication is confirmed by other means to prevent serious or fatal injury.
Frequently Asked Questions about ABB - Installation Products
How are Thomas and Betts products typically installed?
Thomas and Betts products are installed using a variety of methods tailored to specific applications, including the use of flexible cords and cable fittings, non-metallic cable glands, and armored cable fittings. Proper selection of fittings is crucial to match the cable type and installation environment, ensuring durability and preventing physical damage. Tools such as the Blackburn® Comfort Crimp® and HEX-FLEX® systems enhance installation efficiency and reliability, reducing labor time and ensuring secure connections.
What accessories are available for Thomas and Betts products?
Thomas and Betts offers a comprehensive range of accessories for their products, including various cord and cable fittings, non-metallic cable glands, service entrance cable fittings, and armored cable fittings. Their accessories are designed to enhance installation efficiency and ensure compatibility with different cable types and environmental conditions, providing reliable connections for a wide array of applications.
What environmental ratings do Thomas and Betts products have?
Thomas and Betts products feature robust environmental ratings, including NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications, as well as IEC 60529 IP66 protection. These ratings ensure that their products are designed to withstand harsh industrial environments, with capabilities to resist dust, water, and corrosion, and operate effectively in a wide temperature range.
What communication protocols do Thomas and Betts products support?
Thomas and Betts products support a wide range of industrial communication protocols, including Ethernet, DeviceNet, PROFIBUS, Modbus, CANopen, and others. This extensive compatibility ensures seamless integration and reliable communication across various industrial automation systems, catering to diverse application needs.
What are the key features of Thomas and Betts products?
Thomas and Betts products are known for their innovative designs, high performance, and compliance with industry standards such as the National Electrical Code and Underwriters' Laboratories. They offer a comprehensive range of rugged and reliable electrical fittings, including liquidtight and dust-tight connections, which enhance installation efficiency and reduce overall project costs. Their products are engineered for durability in harsh environments, ensuring long-term reliability and lower installed costs.
What are the main product lines offered by Thomas and Betts?
Thomas and Betts offers a comprehensive range of product lines including electrical connectors, cable management systems, grounding and bonding solutions, and industrial automation components. Their products are designed for durability and reliability in demanding industrial environments, ensuring optimal performance and safety across various applications.
What technical support does Thomas and Betts offer?
Thomas and Betts offers comprehensive technical support, including access to field application engineers for onsite training and installation assistance. Their technical support staff is available to address inquiries related to product specifications and installation practices, ensuring optimal performance and safety of electrical systems. Additionally, they provide a variety of training programs to enhance the knowledge and skills of users in the field.
What industries and applications are Thomas and Betts products used for?
Thomas and Betts products are utilized across various industries including electrical construction, industrial automation, telecommunications, and utilities. Their extensive range of cord and cable fittings, electrical boxes, and metal framing systems are designed for applications that require durability and reliability in harsh environments, ensuring optimal performance in both permanent and temporary installations.
What certifications and standards do Thomas and Betts products comply with?
Thomas and Betts products comply with critical international certifications including UL (Underwriters Laboratories), CSA (Canadian Standards Association), and CE (European Community). Our products are designed to meet rigorous industrial standards such as NEMA enclosure ratings and IEC 60529 IP ratings, ensuring safety and reliability across various industrial applications.
What are the main product lines offered by Ocal?
Ocal offers a comprehensive range of corrosion-resistant conduit systems, including PVC-coated conduit and fittings, conduit bodies, hazardous location fittings, and strut accessories. Their products are designed to provide superior corrosion protection, featuring a hot-dipped galvanizing process and UL listed Type 4X PVC-coated conduit bodies, ensuring durability in the most demanding environments.