ABB Installation Products 10-TL-GAB Tape and Lead - Shield Adapter, Cable Accessory, Insulation .825 to .935 inches
UPC: 783786653454
Contact for Pricing
Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.
Overview
- ABB 10-TL Series Tape and Lead Shield Adapter
- Accommodates cable diameters from 0.825 to 0.935 inches
- Designed for effective electrical insulation and shielding
- Ensures secure interface for lead shielding applications
- Reliable cable accessory from ABB Installation Products
Specifications
Application | Used to Mate and Install the Cable to an Elastimold Product |
Connection | Slide-On |
Material | EPDM-Rubber |
Size | Cable Insulation Diameter .825 to .935 inches |
Standard | ANSI/IEEE Standard 386 |
Temperature Rating, Maximum | 149 F |
Temperature Rating, Maximum | 65 C |
Temperature Rating, Minimum | -40 F |
Temperature Rating, Minimum | -40 C |
Type | Shield Adapter |
Package Dimensions (L x W x H) | 0.01 IN x 0.01 IN x 0.01 IN |
Package Dimensions (L x W x H) | 0.0254 cm x 0.0254 cm x 0.0254 cm |
Package Weight (Imperial) | 0.1400 L |
Package Weight (Metric) | 0.0640 kg |
K675TBC
15/25kV, 900 Amp, Deadbreak Bushing for In-Air Applications (Pad-Mounted or Vault-Type or Submersible Transformers or Switchgear). One Factory installed 5/8-11 UNC-2A Stud included, other Stud must be Purchased Separately. Overall Length 13.75 inch, Diameter 4.50 inch. Molded Epoxy with Stainless Steel Flange. Boot and Collar.
10-TL-HAB
Tape and Lead - Shield Adapter, Cable Accessory, Cable Insulation Diameter 1.040 inch to 1.175 inchFrequently Asked Questions
How is the "W" code determined for 10TL-W adapters?
The "W" letter code for the 10TL-W adapter is determined by the insulation diameter of the Unishield cable.
What insulation diameter does 10TL-GAB support?
The 10TL-GAB adapter supports Unishield cables with an insulation diameter from 0.825 to 0.935 inches (21.0 to 23.7 mm).
What is the voltage rating for this cable adapter?
The 10TL-W Unishield Cable adapter is rated for 15kV applications.
How is the "W" code determined for 10TL-W adapters?
The "W" letter code for the 10TL-W adapter is determined by the insulation diameter of the Unishield cable.
What insulation diameter does 10TL-GAB support?
The 10TL-GAB adapter supports Unishield cables with an insulation diameter from 0.825 to 0.935 inches (21.0 to 23.7 mm).
What is the voltage rating for this cable adapter?
The 10TL-W Unishield Cable adapter is rated for 15kV applications.
How is the "W" code determined for 10TL-W adapters?
The "W" letter code for the 10TL-W adapter is determined by the insulation diameter of the Unishield cable.
What insulation diameter does 10TL-GAB support?
The 10TL-GAB adapter supports Unishield cables with an insulation diameter from 0.825 to 0.935 inches (21.0 to 23.7 mm).
What is the voltage rating for this cable adapter?
The 10TL-W Unishield Cable adapter is rated for 15kV applications.
What is the 10TL-GAB product?
The 10TL-GAB is a specific part number for a 15kV Unishield Cable adapter. It is designed for Unishield cables.
How to Install the 10TL Adapter for Flat Metallic Tape Shielded Cable
This guide provides step-by-step instructions for installing the 10TL adapter on flat metallic tape shielded cables, ensuring proper preparation and connection with Elastimold distribution products. DANGER: All apparatus must be de-energized during installation or removal. This product should be installed only by competent personnel trained in high voltage electrical equipment safety practices.
Estimated time: 1h
Tools needed:
Knife, Rag, Wire strippers, Soldering iron, Measuring tape or ruler
Supplies needed:
10TL Adapter housing, Lubricant (DO NOT SUBSTITUTE), Approved safety solvent, PVC insulating electrical tape (3/4 inch wide), Vinyl plastic electrical tape, #14 AWG (2.08mm²) wire, Grounding lead, Solder, Electrical insulating tape
- Prepare the Cable Outer Jacket
Refer to the Elastimold product instructions for the semiconductive shield removal dimension. Remove the cable's outer jacket a distance of 2 inches (51mm) beyond this specified dimension.
- Remove Metallic Shielding Tape
Carefully remove the metallic tape, ensuring the cut ends are 3/4 inch (19mm) from the edge of the remaining outer jacket.
- Remove Semiconducting Tape
Remove the semiconducting tape, leaving 1 inch (25mm) from the edge of the outer jacket intact.
- Apply Retainer and Marker Tapes
Wrap 1.5 to 2 turns of 3/4 inch (19mm) wide PVC insulating electrical tape over the semiconducting and metallic tapes, 1/2 inch (13mm) from the outer jacket edge, to create a retainer. Then, wrap 2 turns of vinyl plastic electrical tape over the outer jacket, 1 inch (25mm) from its edge, to create a tape marker.
- Clean and Lubricate Cable and Adapter
Clean the outer jacket and thoroughly clean the cable insulation with a rag soaked in an approved safety solvent, wiping from the cable end towards the outer jacket. Lubricate the prepared cable section and the inside of the 10TL adapter with the supplied lubricant (DO NOT SUBSTITUTE).
- Install the 10TL Adapter
Slide the 10TL adapter onto the prepared cable using a forward side-to-side twisting motion. Continue until the adapter is flush with the tape marker applied in Step 4. The adapter's step will serve as a guide for subsequent Elastimold product assembly.
- Install the Elastimold Product
Install the associated ELASTIMOLD distribution product by following its specific installation instructions. Ensure that after installation, the gap between the Elastimold product and the step on the 10TL adapter does not exceed 1/8 inch (3mm).
- Remove Tape Marker
Carefully remove the vinyl plastic electrical tape marker from the cable after the Elastimold product has been fully assembled.
- Ground the Metallic Shielding Tape
Approximately 2 inches (51mm) back from the adapter's end, remove 1.5 inches (38mm) of the outer jacket. Use #14 AWG (2.08mm²) wire to fasten a grounding lead to the exposed metallic shielding tape with several wraps. Solder the grounding lead securely to the metallic tape, taking care to avoid excessive heat that could damage the cable. After soldering, wrap the soldered area with electrical insulating tape, overlapping each cable jacket by approximately 1.5 inches (38mm).
Frequently Asked Questions about ABB - Installation Products
How are Thomas and Betts products typically installed?
Thomas and Betts products are installed using a variety of methods tailored to specific applications, including the use of flexible cords and cable fittings, non-metallic cable glands, and armored cable fittings. Proper selection of fittings is crucial to match the cable type and installation environment, ensuring durability and preventing physical damage. Tools such as the Blackburn® Comfort Crimp® and HEX-FLEX® systems enhance installation efficiency and reliability, reducing labor time and ensuring secure connections.
What accessories are available for Thomas and Betts products?
Thomas and Betts offers a comprehensive range of accessories for their products, including various cord and cable fittings, non-metallic cable glands, service entrance cable fittings, and armored cable fittings. Their accessories are designed to enhance installation efficiency and ensure compatibility with different cable types and environmental conditions, providing reliable connections for a wide array of applications.
What environmental ratings do Thomas and Betts products have?
Thomas and Betts products feature robust environmental ratings, including NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications, as well as IEC 60529 IP66 protection. These ratings ensure that their products are designed to withstand harsh industrial environments, with capabilities to resist dust, water, and corrosion, and operate effectively in a wide temperature range.
What communication protocols do Thomas and Betts products support?
Thomas and Betts products support a wide range of industrial communication protocols, including Ethernet, DeviceNet, PROFIBUS, Modbus, CANopen, and others. This extensive compatibility ensures seamless integration and reliable communication across various industrial automation systems, catering to diverse application needs.
What are the key features of Thomas and Betts products?
Thomas and Betts products are known for their innovative designs, high performance, and compliance with industry standards such as the National Electrical Code and Underwriters' Laboratories. They offer a comprehensive range of rugged and reliable electrical fittings, including liquidtight and dust-tight connections, which enhance installation efficiency and reduce overall project costs. Their products are engineered for durability in harsh environments, ensuring long-term reliability and lower installed costs.
What are the main product lines offered by Thomas and Betts?
Thomas and Betts offers a comprehensive range of product lines including electrical connectors, cable management systems, grounding and bonding solutions, and industrial automation components. Their products are designed for durability and reliability in demanding industrial environments, ensuring optimal performance and safety across various applications.
What technical support does Thomas and Betts offer?
Thomas and Betts offers comprehensive technical support, including access to field application engineers for onsite training and installation assistance. Their technical support staff is available to address inquiries related to product specifications and installation practices, ensuring optimal performance and safety of electrical systems. Additionally, they provide a variety of training programs to enhance the knowledge and skills of users in the field.
What industries and applications are Thomas and Betts products used for?
Thomas and Betts products are utilized across various industries including electrical construction, industrial automation, telecommunications, and utilities. Their extensive range of cord and cable fittings, electrical boxes, and metal framing systems are designed for applications that require durability and reliability in harsh environments, ensuring optimal performance in both permanent and temporary installations.
What certifications and standards do Thomas and Betts products comply with?
Thomas and Betts products comply with critical international certifications including UL (Underwriters Laboratories), CSA (Canadian Standards Association), and CE (European Community). Our products are designed to meet rigorous industrial standards such as NEMA enclosure ratings and IEC 60529 IP ratings, ensuring safety and reliability across various industrial applications.
What are the main product lines offered by Ocal?
Ocal offers a comprehensive range of corrosion-resistant conduit systems, including PVC-coated conduit and fittings, conduit bodies, hazardous location fittings, and strut accessories. Their products are designed to provide superior corrosion protection, featuring a hot-dipped galvanizing process and UL listed Type 4X PVC-coated conduit bodies, ensuring durability in the most demanding environments.