ProLine Top with Cutout for High-Performance Pagoda Exhaust Vent, EMC

ASSY COVER G28 4K, Bulletin MCLP (Non-DPS Service Parts - Other)

1600BTU 230V ACU WITH HOOD

Panduit PLT4I-C0 Locking Cable Ties are designed to satisfy the needs of weather resistant applications, while delivering consistent performance and reliability. Featuring a curved tip to allow for easy pick up from flat surfaces and faster initial threading. Intermediate cross section, 14.5" (368mm) length. Made of Weather Resistant Nylon 6.6 with high resistance to ultraviolet light, are black in color and come in packages of 100.

The inside corner fitting is used to efficiently run cables along an inside corner. It has a 90 angle and is designed to be used with the LD5 or LDPH5 raceway and features a snap-on installation. White.

Panduit RAFCBI2-S6-C20 Right Angle Base Mounts support cables above the mounting surface. Mounts are 2.78 (70.6mm) in height and accept flat cables up to 2.0" (50.8 mm) in width. For use in indoor environments and with #6 (M3) screws. Made of Nylon 6.6 are black in color and come in packages of 100.

Panduit AST25-5-C100 Aerial Support Ties with integral 1/2 (12.7mm) spacer for support strands are designed to keep equipment and cable clear of pole hardware. These ties and spacers together reduce inventory costs and allows for faster installation. They are releasable and re-usable, and do not require install tools. Supports bundles up to 2.5 (63.5mm) in diameter and is for use in outdoor environments. Made of weather-resistant polypropylene, is black in color and comes in packages of 100.

Beam clamp for 1/8" - 1/4" flange for wire, S-hook, strap, and chain

OM4+ Signature Core 50/125 m, 12 fiber, interconnect cable assembly, plenum rated, MPO female to MPO female, Method A, Ultra IL with no pulling eye, Aqua, 50 meters

1/4-20 x 1-1/4 RH CD MS St-Zn

Cord Grip, alum, 1-1/4" NPT, cable range 1.00 - 1.125 with mesh

Liqua-Seal Connector, straight, insulated, 3/4" NPT, zinc plated steel with mesh