Lighting Panelboard - Merchand. A-Series Fronts. Afd. A Series Front-Wide,Nameplt. 6SNW6279

Offset Pin Terminal 400 MCM All-aluminum Pin Terminals is designed for termination of both aluminum and copper conductors. The pin is offset for use in tight spaces and for ease of installation in side-by-side terminations. The solid pin is made of aluminum and is tin-plated and pre-filled with oxide inhibitor. A cover is provided for quick installation. Rated 600 Volts.

StandardBarrel TinnedCopperSplice600MCM Standard Barrel Tinned CopperSplices is a type of copper compression connector that is produced from high conductivity copper tubing. They are tin-plated to provide corrosion resistance and are marked with die index and color coded for easy reference. Listed for 35KV maximum when properly installed.

12-in Red hook and loop fastener Cable Ties - 20 Pieces hook and loop fastener Cable Ties offer a unique back-to-back fastening system: a self-gripping, double-sided strap that is easy to use and cost effective. They feature a molded high performance polyethylene hook fastener laminated on to a non-woven polyester loop. The low peel strength allows for easy entry or removal by the user yet the average shear strength is 3.0 psi, which increases substantially with each circular rotation. Will not over-cinch delicate cable and fiber optics. For use with cord and cable management, wire harnesses, inventory control, fibre optics, packaging, in-plant maintenance, etc. Allow for a minimum 2" overlap when installing.

8 AWG Nylon Insulated Ring 1/4" Stud, 25 Per Pack

Wire Marker Book (+,-,Ac,Dc,Pos,Neg,Grd,Neutral Bar,Spare,Blank), Book Contains 450 individual markers

Wire Marker Cards (#27) vinyl impregnated cloth markers 1.5" long

Cable Clamp Heavy Duty Natural .437" 100

Voltage Markers 208 Volts, 1ea. 9x2.25"

Voltage Marker Card 220 Volts, 12ea. .5x2.25"

Power Distribution Block (1) 350 MCM-6 AWG Primary (1) 350 MCM-6 AWG Secondary Power Distribution Blocks are made of high strength, high-conductivity aluminum alloy and are mounted in a high-strength glass-filled polyester base. Each block can stand alone or combine with other blocks to form a multi-block set.

The Polaris ITO-1/0B Multi-Tap Offset Dual-Side Entry Connector features 2 ports sized for 1/0 - 14 AWG wires. The body is made from aluminum alloy wrapped in a layer of plastisol insulation. Each port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.