The Polaris ISR-500 Multi-Tap In-Line Entry Connector features 2 ports sized for 500 MCM - 4 AWG wires. The body is made from aluminum alloy wrapped in a layer of plastisol insulation. Each port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.

The TORK 403B Easy-Set 24-hour indoor mechanical plug-in lighting and appliance timer feature one polarized outlet and a tab programming system. Automate your home or office in a looping daily schedule using the simple timer buttons to schedule on/off times in 30-minute increments. Designed for applications including lamps, lights, indoor holiday decorations, polarized appliances and more.

The Polaris IT-4C Multi-Tap Single-Side Entry Vision Tap Connector features 2 ports sized for 4-14 AWG wires. The clear body allows users to see their conductor placement and is wrapped in a layer of plastisol insulation. Each port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.

This Cat5e Combo Pack includes 50 of Platinum's RJ45 8-pin/8-position registered jack connectors used to connect computers onto Cat5e data networks and are recommended for data applicationsrated to 1 Gb. It simplifies twisted pair terminations by allowing the wires to be inserted through the connector and out the front. This allows the technician to easily verify the proper wiring order. In addition, it includes 50 pieces of Platinum's EZ-Strain Cat5e Strain Relief which is designed specifically to be crimped with the EZ-RJ45® connector. The primary strain relief of the plug locks the snag proof strain relief in place so they will not pull off, creating one, integral assembly. Once crimped, this design allows the plug's primary strain relief to relax slightly, preventing the cable pairs from being over compressed.

Connector, Liquid Tight, 45 Degree, US Steel, Size 3/4 Inch, Insulated Throat

Compression Transition Coupling, Rigid/IMC to EMT, Zinc Die Cast 2 Inch

Dome Cap Cable Gland, gray, Polyamide, 1/2" NPT, cable range .23 - .47

HPE DL360 Gen11 OROC TM Cbl Ki

HPE DL360 Gen11 NS204i-u Rear

HPE ProLiant DL320 Gen11 12LFF Configure-to-order Server

The FEIP-21 dual-port Ethernet adapter module enables the connection of a drive to an Ethernet network, utilizing twisted pair as the physical media in either a star or daisy chain topology. FEIP-21 supports Ethernet IP communication protocols; 10 Mbit/s and 100 Mbit/s data transfer rates, and; automatically detects the data transfer rate used in the network.

2 Hole Long Barrel Copper Compression Lug 2 AWG - 1/2" Bolt Long Barrel Copper Compression Lugs are produced from high conductivity copper tubing. Allows easy inspection of the termination to assure complete cable insertion. Tin-plated to provide corrosion and low contact resistance. Marked with die index and color coded. Listed for 35KV maximum when properly installed. Rated 600V. cULus 486A/B Listed. UL467 Listed on sizes 6 AWG - 3/0 AWG. Temperature rating 90 degrees C.