6 AWG Nylon Insulated Ring 1/4" Stud - 15 Per Pack

Power Distribution Block 1000-250 MCM Primary 2/0-14 AWG Secondary Power Distribution Blocks are made of high strength, high-conductivity aluminum alloy and are mounted in a high-strength glass-filled polyester base. Each block can stand alone or combine with other blocks to form a multi-block set.

CONNECTOR ASS'Y,PACK,GPR-250ST/400ST,(1 Inner box=10ea)

CONNECTOR ASS'Y,PACK,GPR-H500/H600-A,ST

Compact Control Builder AC 800M 6.2.0

MR-4 AC220V 50/60Hz 2a2b (Metasol) EXP (MR4-22-M7-E)

LUG ASS'Y,EBT43,TS800

ABB's Servicenter™ Single-Phase Integral Transformer and load center system comes equipped with an encapsulated transformer wired into rightly sized circuit breakers for both the primary and secondary transformer windings. Qualified to the seismic requirements of IEEE-693-2005 and IBC-2021 and CBC 2022. Accessible mounting flanges with keyhole slotted mounting holes to make installation easy. NEMA 3R painted enclosure. Clear, comprehensive documentation and labeling. The Servicenter system is UL Listed and is suitable for use service equipment with a 10 kAIC short circuit current rating. The load center portion of this system is ready to accept the ABB THQL plug-on circuit breakers.

HPS Open Style Control Transformer, 350VA 415/400/380V-120/24V 50/60Hz

Mersen GPM-G panel mount fuse holders will accommodate 1/4"x1-1/4" fuses most are approved by U.L. and CSA. Cap and body material is bakelite or polycarbonate and function as a screw-in or bayonet style closure. Finger-grip or screwdriver slots are available. All holders are rated for up to 250 volts with amp ratings ranging from 3A to 15A. 250 Volts 10 Amps bayonet cap 1/4 QC/solder series.

dV/dT filter 22 amperes up to 600 volts type 1

Passive Harmonic Filters, 25 HorsePower, 480 Volts, 32 Amperes, 60 Hertz, Open Style, Contactor