Showing 469-480 of 451,803 results

Contact for Pricing

ABB - Installation Products · ABB
SWD160A1724
Tinned Copper, Standard Flexible Braid Connector, SWD Series, 4 Hole Pads with NEMA Standard 9/16 inch (14.3 mm) Holes and 1-3/4 inch (44.4 mm) Spacing Center to Center. 28.5 inch (724 mm) long, 4 inch (101.6 mm) wide, 1/4 inch (6.3 mm) thick. Pad 4 inch x 4 inch. 30 AWG Individual Strand. 1600 Amps
Contact for Pricing

ABB - Installation Products · ABB
K675TBC
15/25kV, 900 Amp, Deadbreak Bushing for In-Air Applications (Pad-Mounted or Vault-Type or Submersible Transformers or Switchgear). One Factory installed 5/8-11 UNC-2A Stud included, other Stud must be Purchased Separately. Overall Length 13.75 inch, Diameter 4.50 inch. Molded Epoxy with Stainless Steel Flange. Boot and Collar.
Contact for Pricing

ABB - Installation Products · CARLON
B468R
Four-Gang Old Work Outlet Box, Volume 71 Cubic Inches, Length 7.57 Inches, Width 2.89 Inches, Depth 3.56 Inches, Color Blue, Material PVC, Mounting Means Mounting Ears and Two Swing Clamps
Contact for Pricing
Minimum Qty: 6
Multiplier: 6
*Contact for lower quantities*

Contact for Pricing

NSI Industries · Polaris · Polaris Black
IPLMD350-6
The Polaris IPLMD350-6 Multi-Tap Mountable Dual-Sided Entry Connector features 6 ports sized for 350 MCM - 6 AWG wires. Mounting holes on either side of the connector allow for direct mounting to troughs, panels or wireways with 1/4†bolts. The body is made from aluminum alloy wrapped in a layer of plastisol insulation. Each dual-sided port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.
Contact for Pricing
Minimum Qty: 2
Multiplier: 2
*Contact for lower quantities*

SolaHD
HSS1F1BS
Non-Ventilated Automation Transformer, Stainless Steel,1 kVA, Primary Amps 4.17/2.08, Secondary Amps 8.33/4.17, 240x 480 Primary, 120/240 Secondary, 60 HZ, Single Phase
Contact for Pricing

SolaHD
HZ123000R
Industrial Control Transformer, Type 4/12, 3 Kva, 480 Volt Primary, 240 Volt Secondary, 50/60 HZ
Contact for Pricing

Contact for Pricing

Contact for Pricing
Minimum Qty: 2
Multiplier: 2
*Contact for lower quantities*

High Speed Fuse Amp-Trap® A70P 700VAC 650VDC 400A Bolted Blade TA Indicator
Contact for Pricing

A13X Amp-trap Form 101 Semiconductor Protection fuses were designed for the specific protection of diodes and other semiconductor devices rated 130VAC. The A13X product line's compact design is perfect for those applications that have limitations on available space. 130 Volts 400 Amps type 4 connection.
Contact for Pricing