All Categories

Electrical Systems and Lighting and Components and Accessories and Supplies

Electrical Equipment, Components, and Supplies

Electrical Lugs Plugs And Connectors

Subcategories

    Automatic Wire Or Cable Connector

    Backshell connectors

    Battery Terminal

    Cable Gland Connector

    Cable Joint

    Cable Or Wire Lug

    Circular Connectors

    Coaxial Connectors

    Connecting Leads or Wires

    Connector And Cable Seal

    Crab Joint

    Electrical Connector Assembly

    Electrical Extension Cable

    Electrical Metallic Tubing Emt Connectors

    Electrical Metallic Tubing Emt Elbow

    Electrical plug/receptacle adapter

    Electrical Plugs

    Electrical Receptacles

    Electrical Sleeves

    Electrical Taps

    Electrical Terminals

    Electrical Underground Bus Connector

    Electrodes

    Electronic Connector Caps

    Flex Connectors

    Flexible Braid

    Heavy Duty Connector Hood & Housing

    Heavy Duty Connector Insert & Contact

    Input Output Connector Cover

    Jack for Plug

    Jumper Bar

    Liquid Tight Connectors

    Locking Plug

    Mechanical Connector Lug and Cap

    Mechanical Connectors

    Panel Interface Connector

    Power Distribution Blocks

    Printed Circuit Board Pcb Press Fit Header Connector

    Rj Jack And Module

    Tap Off

    Telecommunication Connector

    Terminal Block Accessories

    Terminal Block Covers

    Terminal Block Markers and Marking Accessories

    Terminal Block Separator

    Terminal Blocks

    Terminal Strips

    Twist On Wire Connector

    Wire Connectors

    Wire Or Cable Compression Connector

    Wire Or Cable Compression Reducer

    Wire Or Cable Compression Splice

    Wire Terminal Connector Kit

    Wire Terminal Disconnect

    Wiring Taps

Showing 505-516 of 3,357 results

NSI Industries IPLMD350-4 - The Polaris IPLMD350-4 Multi-Tap Mountable Dual-Sided Entry Connector features 4 ports sized for 350 MCM - 6 AWG wires. Mounting holes on either side of the connector allow for direct mounting to troughs, panels or wireways with 1/4†bolts. The body is made from aluminum alloy wrapped in a layer of plastisol insulation. Each dual-sided port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.
NSI Industries · Polaris · Polaris Black

IPLMD350-4


The Polaris IPLMD350-4 Multi-Tap Mountable Dual-Sided Entry Connector features 4 ports sized for 350 MCM - 6 AWG wires. Mounting holes on either side of the connector allow for direct mounting to troughs, panels or wireways with 1/4†bolts. The body is made from aluminum alloy wrapped in a layer of plastisol insulation. Each dual-sided port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.

Contact for Pricing

Minimum Qty: 2

Multiplier: 2

*Contact for lower quantities*

NSI Industries IPLMD250-6 - The Polaris IPLMD250-6 Multi-Tap Mountable Dual-Sided Entry Connector features 6 ports sized for 250 MCM - 6 AWG wires. Mounting holes on either side of the connector allow for direct mounting to troughs, panels or wireways with 1/4†bolts. The body is made from aluminum alloy wrapped in a layer of plastisol insulation. Each dual-sided port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.
NSI Industries · Polaris · Polaris Black

IPLMD250-6


The Polaris IPLMD250-6 Multi-Tap Mountable Dual-Sided Entry Connector features 6 ports sized for 250 MCM - 6 AWG wires. Mounting holes on either side of the connector allow for direct mounting to troughs, panels or wireways with 1/4†bolts. The body is made from aluminum alloy wrapped in a layer of plastisol insulation. Each dual-sided port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.

Contact for Pricing

Minimum Qty: 2

Multiplier: 2

*Contact for lower quantities*

NSI Industries IPLMD3/0-5 - The Polaris IPLMD3/0-5 Multi-Tap Mountable Dual-Sided Entry Connector features 5 ports sized for 3/0 - 6 AWG wires. Mounting holes on either side of the connector allow for direct mounting to troughs, panels or wireways with 1/4†bolts. The body is made from aluminum alloy wrapped in a layer of plastisol insulation. Each dual-sided port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.
NSI Industries · Polaris · Polaris Black

IPLMD3/0-5


The Polaris IPLMD3/0-5 Multi-Tap Mountable Dual-Sided Entry Connector features 5 ports sized for 3/0 - 6 AWG wires. Mounting holes on either side of the connector allow for direct mounting to troughs, panels or wireways with 1/4†bolts. The body is made from aluminum alloy wrapped in a layer of plastisol insulation. Each dual-sided port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.

Contact for Pricing

Minimum Qty: 2

Multiplier: 2

*Contact for lower quantities*

NSI Industries IPLDS500-12 - The Polaris IPLDS500-12 Multi-Tap Dual-Sided Entry Connector features 12 ports sized for 500 MCM - 4 AWG wires. The body is made from aluminum alloy wrapped in a layer of plastisol insulation. One side features stacked ports, with double-sided ports on the bottom for greater flexibility. Each port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of tight-fitting splicing applications, including installation in small wire ways or panels.
NSI Industries · Polaris · Polaris Black

IPLDS500-12


The Polaris IPLDS500-12 Multi-Tap Dual-Sided Entry Connector features 12 ports sized for 500 MCM - 4 AWG wires. The body is made from aluminum alloy wrapped in a layer of plastisol insulation. One side features stacked ports, with double-sided ports on the bottom for greater flexibility. Each port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of tight-fitting splicing applications, including installation in small wire ways or panels.

Contact for Pricing

NSI Industries IT-500B - The Polaris IT-500B Multi-Tap Dual-Side Entry Connector features 2 ports sized for 500 MCM to 4 AWG wires. The body is made from aluminum alloy wrapped in a layer of plastisol insulation. Each port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Dual rated for use with copper or aluminum cables. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.
NSI Industries · Polaris · Polaris Black

IT-500B


The Polaris IT-500B Multi-Tap Dual-Side Entry Connector features 2 ports sized for 500 MCM to 4 AWG wires. The body is made from aluminum alloy wrapped in a layer of plastisol insulation. Each port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Dual rated for use with copper or aluminum cables. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.

Contact for Pricing

NSI Industries ISR-1/0B - The Polaris ISR-1/0B Multi-Tap In-Line Entry Connector features 2 ports sized for 1/0 - 14 AWG wires. The body is made from aluminum alloy wrapped in a layer of plastisol insulation. Each port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.
NSI Industries · Polaris · Polaris Black

ISR-1/0B


The Polaris ISR-1/0B Multi-Tap In-Line Entry Connector features 2 ports sized for 1/0 - 14 AWG wires. The body is made from aluminum alloy wrapped in a layer of plastisol insulation. Each port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.

Contact for Pricing

NSI Industries IPLD250-4B - The Polaris IPLD250-4B Multi-Tap Dual-Sided Entry Black Connector features 4 ports sized for 250 MCM - 6 AWG wires. The body is made from aluminum alloy wrapped in a layer of plastisol insulation. Each dual-sided port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies, and comes packaged in a clear plastic bag with a mounting hole for hanging in retail displays. Designed for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.
NSI Industries · Polaris · Polaris Black

IPLD250-4B


The Polaris IPLD250-4B Multi-Tap Dual-Sided Entry Black Connector features 4 ports sized for 250 MCM - 6 AWG wires. The body is made from aluminum alloy wrapped in a layer of plastisol insulation. Each dual-sided port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies, and comes packaged in a clear plastic bag with a mounting hole for hanging in retail displays. Designed for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.

Contact for Pricing

NSI Industries IPLD350-5B - The Polaris IPLD350-5B Multi-Tap Dual-Sided Entry Black Connector features 5 ports sized for 350 MCM - 6 AWG wires. The body is made from aluminum alloy wrapped in a layer of plastisol insulation. Each dual-sided port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies, and comes packaged in a clear plastic bag with a mounting hole for hanging in retail displays. Designed for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.
NSI Industries · Polaris · Polaris Black

IPLD350-5B


The Polaris IPLD350-5B Multi-Tap Dual-Sided Entry Black Connector features 5 ports sized for 350 MCM - 6 AWG wires. The body is made from aluminum alloy wrapped in a layer of plastisol insulation. Each dual-sided port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies, and comes packaged in a clear plastic bag with a mounting hole for hanging in retail displays. Designed for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.

Contact for Pricing

NSI Industries IPLMD750-3 - The Polaris IPLMD750-3 Multi-Tap Mountable Dual-Sided Entry Connector features 3 ports sized for 750 - 250 MCM. Mounting holes on either side of the connector allow for direct mounting to troughs, panels or wireways with 1/4†bolts. The body is made from aluminum alloy wrapped in a layer of plastisol insulation. Each dual-sided port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.
NSI Industries · Polaris · Polaris Black

IPLMD750-3


The Polaris IPLMD750-3 Multi-Tap Mountable Dual-Sided Entry Connector features 3 ports sized for 750 - 250 MCM. Mounting holes on either side of the connector allow for direct mounting to troughs, panels or wireways with 1/4†bolts. The body is made from aluminum alloy wrapped in a layer of plastisol insulation. Each dual-sided port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.

Contact for Pricing

NSI Industries IPLMD750-4 - The Polaris IPLMD750-4 Multi-Tap Mountable Dual-Sided Entry Connector features 4 ports sized for 750 - 250 MCM. Mounting holes on either side of the connector allow for direct mounting to troughs, panels or wireways with 1/4†bolts. The body is made from aluminum alloy wrapped in a layer of plastisol insulation. Each dual-sided port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.
NSI Industries · Polaris · Polaris Black

IPLMD750-4


The Polaris IPLMD750-4 Multi-Tap Mountable Dual-Sided Entry Connector features 4 ports sized for 750 - 250 MCM. Mounting holes on either side of the connector allow for direct mounting to troughs, panels or wireways with 1/4†bolts. The body is made from aluminum alloy wrapped in a layer of plastisol insulation. Each dual-sided port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.

Contact for Pricing

NSI Industries SITG-6 - : The Polaris SITG-6 10-Pack of Replacement Sleeves fit Polaris Grey Multi-Tap Connectors sized for 6 – 14 AWG wires. The sleeves are made from tin plated copper and rated for up to 600V charges. The set screws in Polaris Grey connectors crimp the internal sleeve when tightened, ensuring a strong connection with fine-stranded copper wires. These replacement sleeves allow connectors to be re-used like brand new. Use these connectors in a wide range of splicing fine-stranded wire applications, including installation in cable trays, troughs, wire-ways, raceways, ducts and motor junction boxes.
NSI Industries · Polaris · Polaris Grey

SITG-6


: The Polaris SITG-6 10-Pack of Replacement Sleeves fit Polaris Grey Multi-Tap Connectors sized for 6 – 14 AWG wires. The sleeves are made from tin plated copper and rated for up to 600V charges. The set screws in Polaris Grey connectors crimp the internal sleeve when tightened, ensuring a strong connection with fine-stranded copper wires. These replacement sleeves allow connectors to be re-used like brand new. Use these connectors in a wide range of splicing fine-stranded wire applications, including installation in cable trays, troughs, wire-ways, raceways, ducts and motor junction boxes.

Contact for Pricing

NSI Industries IPLD600-4 - The Polaris IPLD600-4 Multi-Tap Dual-Sided Entry Connector features 4 ports sized for 600 MCM - 6 AWG wires. The body is made from aluminum alloy wrapped in a layer of plastisol insulation. Each dual-sided port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.
NSI Industries · Polaris · Polaris Black

IPLD600-4


The Polaris IPLD600-4 Multi-Tap Dual-Sided Entry Connector features 4 ports sized for 600 MCM - 6 AWG wires. The body is made from aluminum alloy wrapped in a layer of plastisol insulation. Each dual-sided port is pre-loaded with an oxide inhibitor, with removable access plugs over the hex screws used to tighten the connections. Installs with a hex key and torque wrench, without any tape or additional supplies. Designed for use in a wide range of splicing applications, including installation in cable trays, panel boards, ducts, raceways or troughs.

Contact for Pricing

Minimum Qty: 2

Multiplier: 2

*Contact for lower quantities*

Showing 505-516 of 3,357 results