NSI Industries SITG-6 - : The Polaris SITG-6 10-Pack of Replacement Sleeves fit Polaris Grey Multi-Tap Connectors sized for 6 – 14 AWG wires. The sleeves are made from tin plated copper and rated for up to 600V charges. The set screws in Polaris Grey connectors crimp the internal sleeve when tightened, ensuring a strong connection with fine-stranded copper wires. These replacement sleeves allow connectors to be re-used like brand new. Use these connectors in a wide range of splicing fine-stranded wire applications, including installation in cable trays, troughs, wire-ways, raceways, ducts and motor junction boxes.
NSI Industries

SITG-6

UPC: 662381951601

Contact for Pricing

Overview

The Polaris SITG-6 10-Pack of Replacement Sleeves for Polaris Grey Connectors helps reuse any connectors sized for 6 – 14 AWG wires. Tightening the set screw of a Polaris Grey connector crimps the internal ferrules to form a strong connection with fine-strand wires. These sleeves replace that crimped part, allowing the connector to be reused like new. Polaris Grey provides the simplest solution for forming a secure connection between fine-stranded wire conductors in applications including cable trays, troughs, wire-ways, raceways, ducts and motor junction boxes. Each connector is rated for 600V, comes pre-loaded with an oxide inhibitor and installs faster than traditional uninsulated connector options using just a hex key and torque wrench. Their aluminum alloy bodies are wrapped in high-dielectric strength plastisol insulation, which is ergonomically molded to offer a comfortable grip, in addition to being resistant to abrasion, chemicals and UV rays. The all-in-one design saves time and supplies on each job by eliminating the need for cover and taping; simply brush the conductors clean, strip back their insulation, insert one conductor into each port and secure the covered pressure screws. Polaris pre-insulated connectors are available in a range of port numbers and configurations to fit the needs of any job, including UL-listed parallel configurations. Polaris: the original pre-insulated connector and still the brand most asked for by name.
  • Replacement Sleeve: Reuse connectors by replacing the crimped internal ferrules with this 10-pack of sleeves, sized for 6 – 14 AWG ports in Polaris Grey connectors
  • Tin-Plated Copper: Each sleeve is made from resilient tin-plated copper that performs well in harsh environments to extend the life of the connector
  • Fine-Stranded Wires: Polaris Grey is specially designed to splice fine-stranded, flexible and extra-flexible copper conductors, including DLO cable and motor lead wires
  • Professional Performance: The 600V voltage rating and 90 degrees Celsius operating temperature ensure that these sleeves excel in professional applications
  • Can be used with Class B, C, D, K, M of copper conductor, but is specifically designed for use with fine-stranded, flexible and extra-flexible copper conductors.

Specifications

Application
Wire Termination
Color
Tin Plated Copper
Environmental Conditions
90 C
Finish
Tin Plated
Housing Material
Copper
Material
Copper
Special Features
10 Replacement Sleeves Per Bag
Standard
cULus
Temperature Rating
90 C
Temperature Rating, Maximum
194 F
Temperature Rating, Maximum
90 C
Temperature Rating, Minimum
194 F
Temperature Rating, Minimum
90 C
Type
Replacement Sleeves
Voltage Rating
600 V
Warranty
1 Year
Wire Type
B,C,D,K,M,I
Wire/Cable Class
B,C,D,K,M,I
Package Dimensions (L x W x H)
0.55 IN x 0.25 IN x 0.353 IN
Package Dimensions (L x W x H)
13.97 mm x 6.35 mm x 8.9662 mm
Package Weight (Imperial)
0.028 L
Package Weight (Metric)
0.013 kg
The Polaris SITG-1 10-Pack of Replacement Sleeves fit Polaris Grey Multi-Tap Connectors sized for 1 – 10 AWG wires. The sleeves are made from tin plated copper and rated for up to 600V charges. The set screws in Polaris Grey connectors crimp the internal sleeve when tightened, ensuring a strong connection with fine-stranded copper wires. These replacement sleeves allow connectors to be re-used like brand new. Use these connectors in a wide range of splicing fine-stranded wire applications, including installation in cable trays, troughs, wire-ways, raceways, ducts and motor junction boxes.

SITG-1

The Polaris SITG-1 10-Pack of Replacement Sleeves fit Polaris Grey Multi-Tap Connectors sized for 1 – 10 AWG wires. The sleeves are made from tin plated copper and rated for up to 600V charges. The set screws in Polaris Grey connectors crimp the internal sleeve when tightened, ensuring a strong connection with fine-stranded copper wires. These replacement sleeves allow connectors to be re-used like brand new. Use these connectors in a wide range of splicing fine-stranded wire applications, including installation in cable trays, troughs, wire-ways, raceways, ducts and motor junction boxes.
All Purpose Split Bolt Connector 4 AWG is used for combinations of aluminum to copper, aluminum to aluminum, steel to aluminum, copper to copper, and steel to copper applications. They have an electro-tinned body. UL listed for copper and copperweld wires only. Includes nut, spacer and pressure pad.

N-4SP

All Purpose Split Bolt Connector 4 AWG is used for combinations of aluminum to copper, aluminum to aluminum, steel to aluminum, copper to copper, and steel to copper applications. They have an electro-tinned body. UL listed for copper and copperweld wires only. Includes nut, spacer and pressure pad.
Copper Split Bolt Connector 750 MCM Copper Split Bolt Connectors are high-strength solderless service connectors made of high-copper alloy for copper and copperweld wires. Type for two maximum wire sizes.

N-750

Copper Split Bolt Connector 750 MCM Copper Split Bolt Connectors are high-strength solderless service connectors made of high-copper alloy for copper and copperweld wires. Type for two maximum wire sizes.
Service Post Connector - One Wire Type 2 SOL Service Post Connectors is used for connecting one or two conductors. Made from high copper content hard-drawn rod. Lay-in feature makes them excellent for continuous loop grounding and bonding. Used to ground to bar or plate. Suitable for direct burial in earth or concrete.

SPM-4L

Service Post Connector - One Wire Type 2 SOL Service Post Connectors is used for connecting one or two conductors. Made from high copper content hard-drawn rod. Lay-in feature makes them excellent for continuous loop grounding and bonding. Used to ground to bar or plate. Suitable for direct burial in earth or concrete.
Service Post Connector - Two Wire Type 4-1/0 AWG Service Post Connectors is used for connecting one or two conductors. Made from high copper content hard-drawn rod. Lay-in feature makes them excellent for continuous loop grounding and bonding. Used to ground to bar or plate. Suitable for direct burial in earth or concrete.

SPM-26L

Service Post Connector - Two Wire Type 4-1/0 AWG Service Post Connectors is used for connecting one or two conductors. Made from high copper content hard-drawn rod. Lay-in feature makes them excellent for continuous loop grounding and bonding. Used to ground to bar or plate. Suitable for direct burial in earth or concrete.

Frequently Asked Questions about NSI Industries

What technical support does NSi Industries offer?

NSi Industries offers dedicated technical support through their toll-free technical support line at 888.500.4598. They are committed to customer satisfaction and promise to make every reasonable effort to remedy any product or service issues. Additionally, customers can contact their customer service team at 800.321.5847 or email [email protected] for further technical assistance.

What are the key features of NSi Industries products?

NSi Industries products feature exceptional versatility, reliability, and safety across multiple industrial automation categories. Key features include insulation piercing connectors with no wire stripping required, watertight and corrosion-free designs, wide wire range compatibility (from #14 AWG to 750 MCM), and the ability to install on energized conductors. Their product lines like Easy-Tap™ Connectors and TORK® Digital Timers demonstrate advanced capabilities such as turbo spacers, double shear-head bolts, astronomic scheduling, and enhanced switching technologies.

What environmental ratings do NSi Industries products have?

NSi Industries enclosures feature robust environmental ratings, including IEC 60529 IP66 certification, NEMA Type 1, 2, 3, 4, 4X, 12, and 13 ratings, and UL/CSA standards. Their products are designed for both indoor and outdoor applications, with protection against dust, water, corrosion, and extreme temperatures ranging from -40°F to 266°F.

How are NSi Industries products typically installed?

NSi Industries products are typically installed using detailed mechanical and digital wiring diagrams that specify precise connection methods for various voltage configurations (120V, 208V, 240V, 277V, 480V). Installation involves carefully following product-specific wiring schematics, which include clear terminal block connections, ground wire specifications, and phase alignment requirements. Professional electricians and technicians should reference the specific product's wiring diagram to ensure correct installation and electrical compliance.

What industries and applications are NSi Industries products used for?

NSi Industries provides electrical and automation products for diverse industrial applications, including lighting control, electrical enclosures, wire management, connectors, and sensor technologies. Their product lines serve commercial, industrial, and infrastructure markets with solutions for electrical infrastructure, control systems, and safety-critical environments.

What are the main product lines offered by NSi Industries?

NSi Industries offers a comprehensive range of industrial products including TORK® Photocontrols, Polaris™ Lighting Controls, Easy-Twist™ Grounding Solutions, Miniterms, Cable Ties, Connectors, Enclosures, Occupancy Sensors, and Wire Management systems. Their product lines span electrical components, control devices, and industrial automation accessories designed for diverse applications in commercial and industrial settings.

What accessories are available for NSi Industries products?

NSi Industries offers a range of accessories for their product lines, including photocontrol accessories like replacement caps, mounting brackets, and receptacles. Specific accessories include shorting caps, open caps, 3-pin and 7-pin receptacles, and utility mounting brackets for conduit photocontrols. For specialized applications, NSi recommends contacting their customer service team to discuss custom accessory needs.