All Categories

Electrical Systems and Lighting and Components and Accessories and Supplies

Electrical Equipment, Components, and Supplies

Electrical Lugs Plugs And Connectors

Subcategories

    Automatic Wire Or Cable Connector

    Backshell connectors

    Battery Terminal

    Cable Gland Connector

    Cable Joint

    Cable Or Wire Lug

    Circular Connectors

    Coaxial Connectors

    Connecting Leads or Wires

    Connector And Cable Seal

    Crab Joint

    Electrical Connector Assembly

    Electrical Extension Cable

    Electrical Metallic Tubing Emt Connectors

    Electrical Metallic Tubing Emt Elbow

    Electrical plug/receptacle adapter

    Electrical Plugs

    Electrical Receptacles

    Electrical Sleeves

    Electrical Taps

    Electrical Terminals

    Electrical Underground Bus Connector

    Electrodes

    Electronic Connector Caps

    Flex Connectors

    Flexible Braid

    Heavy Duty Connector Hood & Housing

    Heavy Duty Connector Insert & Contact

    Input Output Connector Cover

    Jack for Plug

    Jumper Bar

    Liquid Tight Connectors

    Locking Plug

    Mechanical Connector Lug and Cap

    Mechanical Connectors

    Panel Interface Connector

    Power Distribution Blocks

    Printed Circuit Board Pcb Press Fit Header Connector

    Rj Jack And Module

    Tap Off

    Telecommunication Connector

    Terminal Block Accessories

    Terminal Block Covers

    Terminal Block Markers and Marking Accessories

    Terminal Block Separator

    Terminal Blocks

    Terminal Strips

    Twist On Wire Connector

    Wire Connectors

    Wire Or Cable Compression Connector

    Wire Or Cable Compression Reducer

    Wire Or Cable Compression Splice

    Wire Terminal Connector Kit

    Wire Terminal Disconnect

    Wiring Taps

Showing 2917-2928 of 3,357 results

ABB - Installation Products AL 350 N 20 HS - Aluminum Two-Hole NEMA Lugs - straight lug, 336.4 - 350 kcmil AL-CU, ACSR 266.8 (26/7) and 336.4 (18/1), installing dies 96, 299, 655, 1 1/8-1, 705, 13A. Length 20 inch. Pad 1-1/2 inch wide x 3-9/16 inch long x 3/8 inch thick. (2) 9/16 inch diameter holes on 1-3/4 inch centers. Barrel 15-5/8 inch x 1-7/64 inch Outside Diameter. Oxide Inhibitor. Brown Cap. Includes FloodSeal Insulating Sleeve, Silicone Grease Pack and Heat Shrink.
ABB - Installation Products · ABB

AL 350 N 20 HS


Aluminum Two-Hole NEMA Lugs - straight lug, 336.4 - 350 kcmil AL-CU, ACSR 266.8 (26/7) and 336.4 (18/1), installing dies 96, 299, 655, 1 1/8-1, 705, 13A. Length 20 inch. Pad 1-1/2 inch wide x 3-9/16 inch long x 3/8 inch thick. (2) 9/16 inch diameter holes on 1-3/4 inch centers. Barrel 15-5/8 inch x 1-7/64 inch Outside Diameter. Oxide Inhibitor. Brown Cap. Includes FloodSeal Insulating Sleeve, Silicone Grease Pack and Heat Shrink.

Contact for Pricing

ABB - Installation Products AL 100 MMNTN 45 - Tin Plated, Aluminum Compression Lug with 45 Degree Bend, 100 mm2 ACSR, Bolt Holes 9/16 inch Diameter, Two Hole NEMA Pad with 1-3/4 inch Center to Center Spacing. Length 6-3/8 inches before Bending, Bore 19/32 inch Diameter x 1-15/16 inch Deep. Pad 3 inch long x 1-15/64 inch wide x 19/64 inch thick. Oxide Inhibitor. Red Cap. Tin Plated Finish. Dies 324 (U29ART). Dual Rated for Aluminum and Copper Conductors
ABB - Installation Products · ABB

AL 100 MMNTN 45


Tin Plated, Aluminum Compression Lug with 45 Degree Bend, 100 mm2 ACSR, Bolt Holes 9/16 inch Diameter, Two Hole NEMA Pad with 1-3/4 inch Center to Center Spacing. Length 6-3/8 inches before Bending, Bore 19/32 inch Diameter x 1-15/16 inch Deep. Pad 3 inch long x 1-15/64 inch wide x 19/64 inch thick. Oxide Inhibitor. Red Cap. Tin Plated Finish. Dies 324 (U29ART). Dual Rated for Aluminum and Copper Conductors

Contact for Pricing

ABB - Installation Products CFA 500 NTN - Tin Plated Aluminum Compression Center Formed Lug, 500 kcmil Stranded-Compressed-Compact AL-CU, Installing Dies 106A, 300, 317, 1 5/6, 15A. Length 6-3/16 inch, Pad Length 2-1/16 inch NEMA Pad (2) 9/16 inch Diameter Holes on 1-3/4 inch Center. Barrel 2-3/4 inch Long, contains Oxide Inhibitor, Pink Cap.
ABB - Installation Products · ABB

CFA 500 NTN


Tin Plated Aluminum Compression Center Formed Lug, 500 kcmil Stranded-Compressed-Compact AL-CU, Installing Dies 106A, 300, 317, 1 5/6, 15A. Length 6-3/16 inch, Pad Length 2-1/16 inch NEMA Pad (2) 9/16 inch Diameter Holes on 1-3/4 inch Center. Barrel 2-3/4 inch Long, contains Oxide Inhibitor, Pink Cap.

Contact for Pricing

Minimum Qty: 25

Multiplier: 25

*Contact for lower quantities*

ABB - Installation Products AL 100 MMNTN - Tin Plated, Aluminum Compression Lug, 100 mm2 ACSR, Bolt Holes 9/16 inch Diameter on 1-3/4 inch Centers, Two Hole NEMA Pad. Length 6 inches, Bore 19/32 inch Diameter x 1-15/16 inch Deep. Pad 3-11/32 inch x 1-15/64 inch wide x 19/64 inch thick. Oxide Inhibitor. Red Cap. Tin Plated Finish. Dies 324 (U29ART) Dual Rated for Aluminum and Copper Conductors
ABB - Installation Products · ABB

AL 100 MMNTN


Tin Plated, Aluminum Compression Lug, 100 mm2 ACSR, Bolt Holes 9/16 inch Diameter on 1-3/4 inch Centers, Two Hole NEMA Pad. Length 6 inches, Bore 19/32 inch Diameter x 1-15/16 inch Deep. Pad 3-11/32 inch x 1-15/64 inch wide x 19/64 inch thick. Oxide Inhibitor. Red Cap. Tin Plated Finish. Dies 324 (U29ART) Dual Rated for Aluminum and Copper Conductors

Contact for Pricing

ABB - Installation Products AL 350 NTN 90 - Tin Plated Aluminum Two-Hole NEMA Lugs - 90 Degree Bend, 350 kcmil AL9CU, 336.4 kcmil, 400 kcmil Compact, ACSR 266.8 (26/7) and 336.4 (18/1), installing dies 96, 299, 655, 1 1/8-2, 13A. Length 6-11/16 inch before bending. Pad 1-35/64 inch wide x 3 inch long x 23/64 inch thick. (2) 9/16 inch diameter holes on 1-3/4 inch Centers. Barrel 2-3/16 inch x 1-7/64 Outside DIameter. Oxide Inhibitor. Brown Cap.
ABB - Installation Products · ABB

AL 350 NTN 90


Tin Plated Aluminum Two-Hole NEMA Lugs - 90 Degree Bend, 350 kcmil AL9CU, 336.4 kcmil, 400 kcmil Compact, ACSR 266.8 (26/7) and 336.4 (18/1), installing dies 96, 299, 655, 1 1/8-2, 13A. Length 6-11/16 inch before bending. Pad 1-35/64 inch wide x 3 inch long x 23/64 inch thick. (2) 9/16 inch diameter holes on 1-3/4 inch Centers. Barrel 2-3/16 inch x 1-7/64 Outside DIameter. Oxide Inhibitor. Brown Cap.

Contact for Pricing

ABB - Installation Products ATDG316ZB - Tension Deadend, Autoset, Steel Strand, Strand Range 3/16 inch - 0.145 - 0.215 (3.68-5.46 mm) For Grade Utilities, Common, Siemens-Martin, High-Strength, 4M rated. ZB option - Galvanized steel clevis pin and stainless steel cotter pin (included) enable the bail to be used with standard deadend suspension insulators.
ABB - Installation Products · ABB

ATDG316ZB


Tension Deadend, Autoset, Steel Strand, Strand Range 3/16 inch - 0.145 - 0.215 (3.68-5.46 mm) For Grade Utilities, Common, Siemens-Martin, High-Strength, 4M rated. ZB option - Galvanized steel clevis pin and stainless steel cotter pin (included) enable the bail to be used with standard deadend suspension insulators.

Contact for Pricing

Minimum Qty: 12

Multiplier: 12

*Contact for lower quantities*

ABB - Installation Products AL 350 N 24 HS - Aluminum Two-Hole NEMA Lugs - straight lug, 336.4 - 350 kcmil AL-CU, ACSR 266.8 (26/7) and 336.4 (18/1), installing dies 96, 299, 655, 1 1/8-1, 705, 13A. Length 24 inch. Pad 1-35/64 inch wide x 3-9/16 inch long x 23/64 inch thick. (2) 9/16 inch diameter holes on 1-3/4 inch centers. Barrel 19-5/8 inch x 1-7/64 inch Outside Diameter. Oxide Inhibitor. Brown Cap. Includes FloodSeal Insulating Sleeve, Silicone Grease Pack and Heat Shrink.
ABB - Installation Products · ABB

AL 350 N 24 HS


Aluminum Two-Hole NEMA Lugs - straight lug, 336.4 - 350 kcmil AL-CU, ACSR 266.8 (26/7) and 336.4 (18/1), installing dies 96, 299, 655, 1 1/8-1, 705, 13A. Length 24 inch. Pad 1-35/64 inch wide x 3-9/16 inch long x 23/64 inch thick. (2) 9/16 inch diameter holes on 1-3/4 inch centers. Barrel 19-5/8 inch x 1-7/64 inch Outside Diameter. Oxide Inhibitor. Brown Cap. Includes FloodSeal Insulating Sleeve, Silicone Grease Pack and Heat Shrink.

Contact for Pricing

ABB - Installation Products SAL 1000-4 N 45 - Aluminum Four-Hole NEMA Lugs - common die series, Compact 1000 kcmil AL, ACSR 795 (30/19) and 874 (54/7), installing dies 140H, 301, 342, 1 1/2. Length 8-3/4 inch before bending. Pad 3 inch wide x 3-1/2 inch long x 1/2 inch thick, (4) 9/16 diameter holes on 1-3/4 inch centers. Barrel 4-7/16 inch. Oxide Inhibitor, Brown Cap.
ABB - Installation Products · ABB

SAL 1000-4 N 45


Aluminum Four-Hole NEMA Lugs - common die series, Compact 1000 kcmil AL, ACSR 795 (30/19) and 874 (54/7), installing dies 140H, 301, 342, 1 1/2. Length 8-3/4 inch before bending. Pad 3 inch wide x 3-1/2 inch long x 1/2 inch thick, (4) 9/16 diameter holes on 1-3/4 inch centers. Barrel 4-7/16 inch. Oxide Inhibitor, Brown Cap.

Contact for Pricing

ABB - Installation Products CAB 350 NTN - Tin Plated Aluminum Compression Lug, 336.4 - 350 kcmil AL-CU, 266.8(26/7) and 336.4 (18/1) ACSR. Dies 1 1/8-1, 13A, 321, 96, 299. 855. Bolt size 1/2 inch, Length 7-1/8 inch. Pad 1-3/4 inch wide x 3-1/8 inch long x 27/64 inch thick. (2) 9/16 inch holes on 1-3/4 inch centers. Barrel 3-1/16 inch long. Oxide Inhibitor. Brown Cap.
ABB - Installation Products · ABB

CAB 350 NTN


Tin Plated Aluminum Compression Lug, 336.4 - 350 kcmil AL-CU, 266.8(26/7) and 336.4 (18/1) ACSR. Dies 1 1/8-1, 13A, 321, 96, 299. 855. Bolt size 1/2 inch, Length 7-1/8 inch. Pad 1-3/4 inch wide x 3-1/8 inch long x 27/64 inch thick. (2) 9/16 inch holes on 1-3/4 inch centers. Barrel 3-1/16 inch long. Oxide Inhibitor. Brown Cap.

Contact for Pricing

Minimum Qty: 225

Multiplier: 225

*Contact for lower quantities*

ABB - Installation Products AL 500 N 608 - Aluminum Two-Hole NEMA Lugs - straight lug, 477-500 kcmil and 500-600 Compact AL-CU and ACSR 397.5 (26/7) and 477 (18/1), installing dies 608, 786, 722, 936. Length 8-1/4 inch. Pad 1-3/4 inch wide x 3-9/16 inch long x 29/64 inch thick. Barrel 3-5/16 inch long x 1-1/2 inch Outside Diameter. (2) 9/16 inch diameter holes on 1-3/4 inch centers. Oxide Inhibitor. Piink Cap.
ABB - Installation Products · ABB

AL 500 N 608


Aluminum Two-Hole NEMA Lugs - straight lug, 477-500 kcmil and 500-600 Compact AL-CU and ACSR 397.5 (26/7) and 477 (18/1), installing dies 608, 786, 722, 936. Length 8-1/4 inch. Pad 1-3/4 inch wide x 3-9/16 inch long x 29/64 inch thick. Barrel 3-5/16 inch long x 1-1/2 inch Outside Diameter. (2) 9/16 inch diameter holes on 1-3/4 inch centers. Oxide Inhibitor. Piink Cap.

Contact for Pricing

Minimum Qty: 100

Multiplier: 100

*Contact for lower quantities*

ABB - Installation Products 2131-11 - Copper Tin-Plated Clamp Tee Connector, Main 1000, Tap 500, Four Bolt Clamp Area is 2 inch wide x 2-11/16 inch long with 1-15/16 spacing longways between bolts and 1-1/4 inch sideways between bolts. Clamp has 1-5/32 inch diameter Hole between plate halves. Compression Barrel is 2-1/2 inch long x 1-1/16 inch Diameter with 53/64 inch Diameter Bore. Barrel Dies are TH 87 20 1 for 500 kcmil Copper Wire. Includes (4) Stainless Steel 3/8-16 x 1-1/2 inch full threaded Bolts and (4) Stainless Steel 3/8 inch Lock Washers.
ABB - Installation Products · ABB

2131-11


Copper Tin-Plated Clamp Tee Connector, Main 1000, Tap 500, Four Bolt Clamp Area is 2 inch wide x 2-11/16 inch long with 1-15/16 spacing longways between bolts and 1-1/4 inch sideways between bolts. Clamp has 1-5/32 inch diameter Hole between plate halves. Compression Barrel is 2-1/2 inch long x 1-1/16 inch Diameter with 53/64 inch Diameter Bore. Barrel Dies are TH 87 20 1 for 500 kcmil Copper Wire. Includes (4) Stainless Steel 3/8-16 x 1-1/2 inch full threaded Bolts and (4) Stainless Steel 3/8 inch Lock Washers.

Contact for Pricing

ABB - Installation Products AL 700 N 608 - Aluminum Two-Hole NEMA Lugs - straight lug, 600 - 700 kcmil AL-CU, Compact 700-795, installing dies 125H, 608, 786. Length 7-5/8 inch. Pad 1-3/4 inch wide x 3-1/2 inch long x 29/64 inch thick. (2) 9/16 inch diameter holes on 1-3/4 inch centers. Barrel 3-1/16 inch x 1-1/2 inch outside Diameter. Oxide Inhibitor. Purple Cap.
ABB - Installation Products · ABB

AL 700 N 608


Aluminum Two-Hole NEMA Lugs - straight lug, 600 - 700 kcmil AL-CU, Compact 700-795, installing dies 125H, 608, 786. Length 7-5/8 inch. Pad 1-3/4 inch wide x 3-1/2 inch long x 29/64 inch thick. (2) 9/16 inch diameter holes on 1-3/4 inch centers. Barrel 3-1/16 inch x 1-1/2 inch outside Diameter. Oxide Inhibitor. Purple Cap.

Contact for Pricing

Minimum Qty: 75

Multiplier: 75

*Contact for lower quantities*

Showing 2917-2928 of 3,357 results