All Categories

Electrical Systems and Lighting and Components and Accessories and Supplies

Electrical Equipment, Components, and Supplies

Electrical Lugs Plugs And Connectors

Subcategories

    Automatic Wire Or Cable Connector

    Backshell connectors

    Battery Terminal

    Cable Gland Connector

    Cable Joint

    Cable Or Wire Lug

    Circular Connectors

    Coaxial Connectors

    Connecting Leads or Wires

    Connector And Cable Seal

    Crab Joint

    Electrical Connector Assembly

    Electrical Extension Cable

    Electrical Metallic Tubing Emt Connectors

    Electrical Metallic Tubing Emt Elbow

    Electrical plug/receptacle adapter

    Electrical Plugs

    Electrical Receptacles

    Electrical Sleeves

    Electrical Taps

    Electrical Terminals

    Electrical Underground Bus Connector

    Electrodes

    Electronic Connector Caps

    Flex Connectors

    Flexible Braid

    Heavy Duty Connector Hood & Housing

    Heavy Duty Connector Insert & Contact

    Input Output Connector Cover

    Jack for Plug

    Jumper Bar

    Liquid Tight Connectors

    Locking Plug

    Mechanical Connector Lug and Cap

    Mechanical Connectors

    Panel Interface Connector

    Power Distribution Blocks

    Printed Circuit Board Pcb Press Fit Header Connector

    Rj Jack And Module

    Tap Off

    Telecommunication Connector

    Terminal Block Accessories

    Terminal Block Covers

    Terminal Block Markers and Marking Accessories

    Terminal Block Separator

    Terminal Blocks

    Terminal Strips

    Twist On Wire Connector

    Wire Connectors

    Wire Or Cable Compression Connector

    Wire Or Cable Compression Reducer

    Wire Or Cable Compression Splice

    Wire Terminal Connector Kit

    Wire Terminal Disconnect

    Wiring Taps

Showing 1285-1296 of 3,357 results

ABB - Installation Products AL 1000-58 MS - Tin Plated, Aluminum Compression Lug, 1000 kcmil, Aluminum and Copper, Bolt Hole Size 11/16 inch Diameter, One Hole NEMA Pad, Moisture Seal. Dies 161, 302, 292, 319, 1 3/4. Length 7-25/32. Pad 1-3/4 inch wide x 1-29/32 inch long x-21/32 inch thick. Barrel 4-11/16 inch Long x 1-27/32 inch Outside Diameter. Oxide Inhibitor. Brown Cap. MS is for Milled Sides.
ABB - Installation Products · ABB

AL 1000-58 MS


Tin Plated, Aluminum Compression Lug, 1000 kcmil, Aluminum and Copper, Bolt Hole Size 11/16 inch Diameter, One Hole NEMA Pad, Moisture Seal. Dies 161, 302, 292, 319, 1 3/4. Length 7-25/32. Pad 1-3/4 inch wide x 1-29/32 inch long x-21/32 inch thick. Barrel 4-11/16 inch Long x 1-27/32 inch Outside Diameter. Oxide Inhibitor. Brown Cap. MS is for Milled Sides.

Contact for Pricing

ABB - Installation Products AL 750 N 20 HS - Aluminum Two-Hole NEMA Lugs - straight lug, 700-750 kcmil AL-CU or 636 (26/7) ACSR, installing dies 140H, 301, 342, 1 1/2. Length 20 inch. Pad 1-3/4 inch wide x 3-3/4 inch long x 37/64 inch Minimum thick. Barrel 15-1/16 inch long x 1-19/32 inch Outside Diameter. (2) 9/16 inch Diameter Holes on 1-3/4 inch center. Oxide Inhibitor. Yellow Cap. Heat Shrink.
ABB - Installation Products · ABB

AL 750 N 20 HS


Aluminum Two-Hole NEMA Lugs - straight lug, 700-750 kcmil AL-CU or 636 (26/7) ACSR, installing dies 140H, 301, 342, 1 1/2. Length 20 inch. Pad 1-3/4 inch wide x 3-3/4 inch long x 37/64 inch Minimum thick. Barrel 15-1/16 inch long x 1-19/32 inch Outside Diameter. (2) 9/16 inch Diameter Holes on 1-3/4 inch center. Oxide Inhibitor. Yellow Cap. Heat Shrink.

Contact for Pricing

ABB - Installation Products 02535230A - 200 Amp, Bi-Metal Spade Contact. CSA. Conductor Size #1 AWG Stranded or Compressed, 1/0 AWG Solid or Compact, includes Lubricant, Crimp Chart CC-0030 and Instruction Sheet IS-02535CC
ABB - Installation Products · ABB

02535230A


200 Amp, Bi-Metal Spade Contact. CSA. Conductor Size #1 AWG Stranded or Compressed, 1/0 AWG Solid or Compact, includes Lubricant, Crimp Chart CC-0030 and Instruction Sheet IS-02535CC

Contact for Pricing

ABB - Installation Products AL 600 N 32 HS - Aluminum Two-Hole NEMA Lugs - Straight Lug, 600 kcmil AL-CU and 550 kcmil and ACSR 477 (26/7) and 556.5 (18/1), Installing Dies 1 5/16, 115H, 786, 936, 473. Length 32 inch. Pad 1-3/4 inch wide x 3-5/8 inch long x 1/2 inch thick. (2) 9/16 inch Diameter holes on 1-3/4 inch centers. Barrel 27-3/16 inch x 1-7/16 inch Outside Diameter. Oxide Inhibitor, Black Cap. Includes Heat Shrink.
ABB - Installation Products · ABB

AL 600 N 32 HS


Aluminum Two-Hole NEMA Lugs - Straight Lug, 600 kcmil AL-CU and 550 kcmil and ACSR 477 (26/7) and 556.5 (18/1), Installing Dies 1 5/16, 115H, 786, 936, 473. Length 32 inch. Pad 1-3/4 inch wide x 3-5/8 inch long x 1/2 inch thick. (2) 9/16 inch Diameter holes on 1-3/4 inch centers. Barrel 27-3/16 inch x 1-7/16 inch Outside Diameter. Oxide Inhibitor, Black Cap. Includes Heat Shrink.

Contact for Pricing

ABB - Installation Products L 1000NTB (UNPLATED) - Copper Two-Hole Lug with Flared-End Barrel, wire size 1000 kcmil Copper. Installing Dies 125, 642. Length 7-1/4 inch. Pad 1-3/4 inch wide x 3-1/4 inch long x 21/64 inch thick. (2) 9/16 inch diameter Holes on 1-3/4 inch centers. Barrel 2-29/32 inch long. Unplated.
ABB - Installation Products · ABB

L 1000NTB (UNPLATED)


Copper Two-Hole Lug with Flared-End Barrel, wire size 1000 kcmil Copper. Installing Dies 125, 642. Length 7-1/4 inch. Pad 1-3/4 inch wide x 3-1/4 inch long x 21/64 inch thick. (2) 9/16 inch diameter Holes on 1-3/4 inch centers. Barrel 2-29/32 inch long. Unplated.

Contact for Pricing

ABB - Installation Products PL 1000 NTSPC - Tin Plated Copper Compression Lug, 1000 kcmil CU, Installing Dies 125, 642. Length 7-1/4 inch. Pad 1-3/4 inch wide x 3-1/4 inch long x 1/3 inch thick. (2) 9/16 inch diameter holes on 1-3/4 inch center. Barrel 2-29/32 inch. Oxide Inhibitor. Brown Cap. Barrel to be Silver Soldered to Prevent Moisture from Entering from Pad.
ABB - Installation Products · ABB

PL 1000 NTSPC


Tin Plated Copper Compression Lug, 1000 kcmil CU, Installing Dies 125, 642. Length 7-1/4 inch. Pad 1-3/4 inch wide x 3-1/4 inch long x 1/3 inch thick. (2) 9/16 inch diameter holes on 1-3/4 inch center. Barrel 2-29/32 inch. Oxide Inhibitor. Brown Cap. Barrel to be Silver Soldered to Prevent Moisture from Entering from Pad.

Contact for Pricing

Minimum Qty: 50

Multiplier: 50

*Contact for lower quantities*

ABB - Installation Products PE 500-68 SOP - Aluminum Lug Pulling Eye for 500 kcmil AL-CU Cable, Installing Dies 106, 300, 317, 1 5/16, 15A. Length 6-3/4 Inch with Safety Orange Paint on Barrel. Pad 1-23/32 inch wide x 2-1/2 inch long x 29/64 inch thick. (1) 23/32 inch Diameter hole. Barrel 3-1/2 inch long.
ABB - Installation Products · ABB

PE 500-68 SOP


Aluminum Lug Pulling Eye for 500 kcmil AL-CU Cable, Installing Dies 106, 300, 317, 1 5/16, 15A. Length 6-3/4 Inch with Safety Orange Paint on Barrel. Pad 1-23/32 inch wide x 2-1/2 inch long x 29/64 inch thick. (1) 23/32 inch Diameter hole. Barrel 3-1/2 inch long.

Contact for Pricing

Minimum Qty: 100

Multiplier: 100

*Contact for lower quantities*

ABB - Installation Products PTM 500 TN - Tin Plated Aluminum Compression Pin Terminals - PT Series, conductor size Aluminum - 447 and 500 and 600 CPT Stranded, 397.5,477, (26/7,18/1) ACSR, installing dies 106A,300,426,1-5/16,317, solid Copper pin 9/16, length 5 inch.
ABB - Installation Products · ABB

PTM 500 TN


Tin Plated Aluminum Compression Pin Terminals - PT Series, conductor size Aluminum - 447 and 500 and 600 CPT Stranded, 397.5,477, (26/7,18/1) ACSR, installing dies 106A,300,426,1-5/16,317, solid Copper pin 9/16, length 5 inch.

Contact for Pricing

Minimum Qty: 100

Multiplier: 100

*Contact for lower quantities*

ABB - Installation Products DB 100 MM 100 MM - Aluminum H-Type Compression Connector - Main 100 millimeters squared ACSR, Tap 100 millimeters squared ACSR, Die D, Length 2.1870 inches,
ABB - Installation Products · ABB

DB 100 MM 100 MM


Aluminum H-Type Compression Connector - Main 100 millimeters squared ACSR, Tap 100 millimeters squared ACSR, Die D, Length 2.1870 inches,

Contact for Pricing

Minimum Qty: 25

Multiplier: 25

*Contact for lower quantities*

ABB - Installation Products BPC 1/0 - Bi-Metallic Pin Terminal, 1/0 Strand, Temperature Rating Aluminum 90 Degrees C. 600 V maximum, 90 Degrees C maximum
ABB - Installation Products · ABB

BPC 1/0


Bi-Metallic Pin Terminal, 1/0 Strand, Temperature Rating Aluminum 90 Degrees C. 600 V maximum, 90 Degrees C maximum

Contact for Pricing

Minimum Qty: 10

Multiplier: 10

*Contact for lower quantities*

Panduit P6-38RHT6-E - High Temperature Ring Terminal, 6 AWG, 3/8" stud size, non-insulated.

High Temperature Ring Terminal, 6 AWG, 3/8" stud size, non-insulated.

Contact for Pricing

Minimum Qty: 500

Multiplier: 500

*Contact for lower quantities*

Panduit P8-38RHT6-Q - High Temperature Ring Terminal, 8 AWG, 3/8" stud size, non-insulated.

High Temperature Ring Terminal, 8 AWG, 3/8" stud size, non-insulated.

Contact for Pricing

Minimum Qty: 500

Multiplier: 500

*Contact for lower quantities*

Showing 1285-1296 of 3,357 results