Lag screw shield for mortar joint applications. It is made of zinc with no additional finish. The shield is 5/16 in. diameter and 1-3/4 in. long, with a 1/2 in. drill size and 2-1/4 in. minimum embedment depth.

3/4" EMT/ 3/4" Rigid Steel Conduit Hanger with Bolt and Nut

Hurricane/ Window/ Door Shutter Screw Kit, 84 piece(s), Plastic, Stainless Steel cap material, including a(n) (20) 1/4 in. Flat Washers, (20) 1/4-20 in. x 1 in. Machine Screws and (10) 2 in. Hurricane Wood Anchors (SS Cap), Installation Instruction Sheet and (1) Concrete Driver, (1) Wood Driver and (20) 1/4-20 in. x 1-1/2 in. Machine Screws, (10) 1-1/4 in. Hurricane Concrete Anchors (SS Cap) and (1) 3/16 in. Carbide Tipped Drill Bit

1/2" EMT 1/2" Rigid Steel Conduit Hanger with Bolt & Nut

Driver for Concrete Vertical Rod Hanger for 3/8 Rod u/m 1

4" EMT 4" Rigid Steel Conduit Hanger with Bolt and Nut

1/4 x 1 Horizontal Wood Rod Hanger for 1/4-20 Threaded Rod Type 17 Point - Use PFMD2201150 Driver

Short Lag Screw Shield, 1/2 in. Size, 5/16 in. diameter, 1-1/4 in. length, Die Cast Alloy material, Zinc finish, 50 per pack

5/16 x 2-1/2 Vertical Wood Rod Hanger for 1/2-13 Threaded Rod Type 17 Point - Use PFMD2201150 Driver

3/8 Wood V-Mt Th-Rod Ancr USA 18-8 SS use SMDB2 Driver

Screw Anchor, 3/8-16 in. Size, 1-5/16 in. length, 3/8-16 in. screw size, Lead Alloy material, 3/4 in. hole size, 50 per pack

1/4-20 x 2 Vertical Steel Rod Hanger for 3/8-16 Threaded Rod #3 Drill Point - Use PFMD2201200 Driver