Contact for Pricing
Minimum Qty: 50
Multiplier: 50
*Contact for lower quantities*
Overview
- Zinc alloy construction for corrosion resistance.
- Designed for secure fastening in mortar joint masonry.
- Suitable for both solid and hollow base materials.
- Accepts 5/16" lag screws, sheet metal screws, or wood screws.
- Requires 1/2" drill size and 2-1/4" minimum embedment depth.
- Suitable for mortar joints, solid masonry, and hollow masonry
- Packaged in boxes of 50 (master cartons of 500)
- Proposition 65 warning: Contains lead
Specifications
Application | and is more resistant to temperature fluctuations and rust than other light-duty anchors.;Can be used in solid or hollow base materials |
Diameter | 5/16 in |
Drill Size | 1/2 IN |
Embedment Depth, Minimum | 2-1/4 in |
Finish | Untreated |
Finish | No additional finish. |
Length | 1-3/4 in |
Material | Steel |
Material | Zinc alloy |
Material | Zinc |
Minimum Embedment Depth | 2-1/4" |
Mounting Type | Mechanical Expansion Anchor |
Mounting Type | Mortar joint masonry |
Mounting Type | Mortar Joints |
Mounting Type | Mortar joint, brick, block, concrete |
Mounting Type | Mortar joint anchoring |
Mounting Type | Mortar joint expansion |
Mounting Type | Mechanical Expansion |
Mounting Type | mortar joint |
Screw Size | 5/16" IN |
Series | Lag Screw Shields |
Series | 60600 Series |
Series | 60608 |
Series | Minerallac LAG SCREW SHIELDS |
Size | 5/16" |
Size | 5/16 in. diameter, 1-3/4 in. length |
Size | 5/16" x 1-3/4" |
Size | 5/16 in. diameter, 1-3/4 in. long |
Size | 5/16" diameter, 1-3/4" long |
Size | 5/16" diameter, 1-3/4" length |
Size | 5/16" diameter x 1-3/4" length |
Size | 5/16" x 6" |
Size | 5/16 x 1-3/4 in |
Size | 5/16 Long |
Type | Lag Screw Shield |
Package Weight (Imperial) | 2.5 lbs |
60610
This is a lag screw shield for mortar joint applications. It is made of zinc and has no additional finish. The shield is 3/8 in diameter, 1-3/4 in long, and requires a 1/2 in drill size with a 3/8 in screw size. Minimum embedment depth is 2-1/4 in.
60802
A lead screw anchor for use with wood screws, lags, and tapping screws in light-duty applications. It is designed for brick, block, drywall, masonry, or concrete and will conform to irregular, out-of-round holes. The anchor is made of lead alloy and measures 3/4 in. long with a #6-8 diameter and 1/4 in. drill size.
60810
A lead screw anchor for use with wood screws, lags, and tapping screws in light-duty applications. It is made of lead alloy and is intended for brick, block, drywall, masonry, or concrete. The anchor has a 1 inch length, a #10-12-14 diameter, a 5/16 inch drill size, and a 1 inch minimum embedment depth.
60602J
This is a lag screw shield for mortar joint applications. It is made of zinc and has no additional finish. The shield is 1/4" short size, with a 1/4" diameter, 1" length, 1/2" drill size, and 1-1/2" minimum embedment depth.
60612
Lag screw shield for mortar joint applications. It is made of zinc with no additional finish. The shield is 3/8 in. diameter, 2-1/2 in. long, and uses a 5/8 in. drill size with a 3/8 in. screw size. Minimum embedment depth is 3 in.
60616
This is a lag screw shield for mortar joint applications. It is made of zinc and has no additional finish. The shield is 3 in. long, 1/2 in. in diameter, and requires a 3/4 in. drill size with a 1/2 in. screw size. Minimum embedment depth is 3-1/2 in.
60618
This is a lag screw shield for mortar joint applications. It is made of zinc and has no additional finish. The shield is 2 in long with a 5/8 in diameter and requires a 7/8 in drill size. Minimum embedment depth is 2-1/2 in, and it is sized for a 5/8 in screw.Frequently Asked Questions
What is the manufacturer of this product?
This product is manufactured by Minerallac Company.
What is the SKU for this product?
The SKU for this product is 60608.
What size lag screw does this shield work with?
This shield is designed for use with a 5/16" lag screw.
What drill size is required for installation?
A 1/2" drill diameter is required for installation.
What materials can this anchor be used in?
This anchor is designed for use in mortar joints of brick, block, or concrete.
Is this product suitable for outdoor use?
Yes, the zinc alloy construction provides corrosion resistance for indoor and outdoor applications.
How to Install the Minerallac 5/16" Lag Shield
Step-by-step guide for installing the Minerallac 5/16" Zinc Alloy Lag Shield.
Estimated time: 15m
Tools needed:
Drill, 1/2" drill bit, Hammer, 5/16" lag screw
Supplies needed:
Minerallac 5/16" Zinc Alloy Lag Shield (SKU 60608)
- Drill Hole
Drill a hole in the mortar joint using a 1/2" drill bit. Ensure the hole is deep enough to accommodate the lag shield.
- Insert Lag Shield
Insert the Minerallac 5/16" Lag Shield into the drilled hole. You may need to gently tap it with a hammer to seat it fully.
- Insert Lag Screw
Insert a 5/16" lag screw through the item to be mounted and into the lag shield. Tighten the lag screw until it is snug.
- Expansion
As the lag screw is tightened, the shield will expand, creating a strong mechanical bond within the mortar joint.
Frequently Asked Questions about Minerallac Company
What are the main product lines offered by Minerallac Company?
Minerallac Company offers multiple comprehensive product lines including Minerallac Traditional (electrical fasteners), Strut Fittings, Stainless Steel Fasteners, Black Claw, Impact Staples, and Redmore. Their Traditional line features over a thousand electrical fastener variations covering conduit/cable/wire products, nail straps, beam clamps, metal stud & drywall accessories, acoustical supports, voice/data hardware, and miscellaneous electrical installation components.
What is Minerallac Company's warranty policy?
Minerallac Company provides a limited warranty that guarantees all products are free from defects in material and workmanship. If a product fails to meet this warranty, Minerallac's sole liability is to replace the product at no charge. The warranty is exclusive and does not cover consequential damages, lost profits, or implied warranties of merchantability or fitness for a particular purpose.
What industries and applications are Minerallac Company products used for?
Minerallac Company products are used extensively across electrical, construction, and industrial applications, including conduit and cable support, beam mounting, metal stud and drywall installation, voice/data infrastructure, and low voltage systems. Their product lines cover critical fastening solutions for electrical contractors, with specialized offerings in conduit hangers, straps, beam clamps, cable supports, and mounting hardware for various industrial environments.
What technical support does Minerallac Company offer?
Minerallac Company offers comprehensive technical support through multiple channels, including a toll-free customer service line at 800-927-3293, email support at [email protected], and online resources at www.minerallac.com. Their support covers product selection, technical specifications, and customer service for their extensive line of electrical fasteners, hangers, straps, and hardware across multiple product brands including Minerallac Traditional, Cully, Black Claw, IMPACT Staples, and Minerallac Stainless Steel. Support hours are 8:00 A.M. to 5:00 P.M. CT for their corporate office and 8:00 A.M. to 5:00 P.M. PT for their regional office.
What are the key features of Minerallac Company products?
Minerallac Company products feature a comprehensive range of electrical fasteners and hardware with exceptional versatility, including over 1,000 different sizes, styles, and finishes. Key features include multiple product lines such as Traditional, Strut Fittings, and Stainless Steel options with specialized finishes like 304/316 Stainless Steel, Hot-Dipped Galvanized, and Zinc Electroplate. Their products are engineered for electrical contractors, offering time-saving solutions with high-quality fasteners designed for durability, corrosion resistance, and worker safety across various installation environments.
What environmental ratings do Minerallac Company products have?
Minerallac Company products have robust environmental ratings, including UL 508A Type 1, 2, 3, 4, 4X, 12, and 13 certifications, CSA Type 1-4X, 12, and 13 ratings, and IEC 60529 IP66 protection. The products are WEEE and RoHS compliant, with UV and oil resistance, and can operate in extreme temperatures ranging from -55°C to 105°C, making them suitable for harsh industrial environments.
What accessories are available for Minerallac Company products?
Minerallac Company offers a comprehensive range of accessories across multiple product categories, including hardware, fasteners, and mounting solutions. Key accessories include stove bolts with nuts, wing nut washers, bar joist washers, stud clip adapters, brackets, perforated strapping, cable support options like J-hooks and bridle rings, box mounting brackets, outlet retainers, and various stud and drywall supports. Their accessories are available in multiple finishes such as stainless steel, hot-dipped galvanized, zinc electroplate, and powder-coated options.
How are Minerallac Company products typically installed?
Minerallac Company products are typically installed using a variety of specialized fastening solutions, including conduit hangers, straps, beam clamps, and mounting brackets designed for different electrical and construction applications. Installation methods vary by product type, with options for metal studs, drywall, beams, acoustical surfaces, and low voltage systems. The company offers multiple installation styles such as one-hole and two-hole straps, universal beam clamps, and specific mounting hardware to ensure secure and efficient attachment across diverse electrical and construction environments.
What communication protocols do Minerallac Company products support?
Minerallac Company's Brad product line supports multiple industrial communication protocols, including Ethernet, DeviceNet, PROFIBUS, Modbus, CANopen, Serial, AS-interface, and CC-Link. Their comprehensive portfolio covers over 40 industrial protocols, providing flexible communication solutions for various industrial automation applications from PC-based control to PLC systems.