Showing 1201-1212 of 1,484 results

ABB - Installation Products · ABB
DSKB 4
Tin Plated Aluminum Keebar, Disconnectable, Transformer Adapter Connector, Tapped 5/8-11 UNS-2B with Left Hand Thread. 5-1/2 inch x 2-9/32 inch with 3/8 inch Pad with one row of 4 1/2-13 UNC-2B Tapped holes on 1-3/8 inch centers. Includes Compound, Cap and Hardware (Eight Stainless Steel 1/2 inch Flat Washers, Eight Stainless Steel 1/2 inch Belleville Washers, Eight Stainless Steel 1/2-13 Nuts and Four Stainless Steel 1/2-13 x 2-1/4 inch Studs.)
Contact for Pricing

ABB - Installation Products · ABB
FTN 175-44-90 AWR
Flood Seal, Aluminum Transformer Connector, with 90 degree pad, Cable Range 4/0 to 1000 kcmil Aluminum or Copper, Total 8 Towers with two rows of four towers, Assembled with Insulating Rockets. Connector is 9-1/4 inch x 4-3/4 inch wide. Upright Pad 4 x 4-1/2 inch and is positioned on left side of connector. 90 Degree Pad is Welded to upright, Contact area is 4 x 4 inch, Pad is 15/16 inch thick with four 9/16 inch Diameter holes on 1-3/4 inch Centers. Connector is PVC coated.
Contact for Pricing
Minimum Qty: 3
Multiplier: 3
*Contact for lower quantities*

ABB - Installation Products · ABB
DSKBU 2 C
Tin Plated Aluminum Universal Keebar, Disconnectable, Transformer Adapter Connector, 2-3/4 inch x 2-53/64 inch. Pad 2-3/4 inch x 1-1/4 inch x 1/2 inch thick. Pad has two 1/2-13 UNC-2B tapped holes on 1-3/8 inch centers. Connector has two 1-14 UNS-2B tapped holes, 1-3/8 inch deep on both ends with Left Hand Threads. Compound and Caps. Hardware includes Four Stainless Steel 1/2 inch Belleville Washers, Four Stainless Steel 1/2 inch Flat Washers, Four Steel 1/2 inch Nuts and Two Stainless Steel 1/2-13 x 2-1/4 inch Studs. Also Includes Boot.
Contact for Pricing

ABB - Installation Products · ABB
FTU 1-125-3 AWR
Black PVC Coated Aluminum, Screw-on Transformer Connector. 5 inch wide. Three 1-Hole Outlets with Insulating Rockets and Screws. Includes Adapter and EPDM Rubber Stud Cover and Steel Jam 1-14 Nut.
Contact for Pricing

ABB - Installation Products · ABB
FTH 44-175-30 CUAWR
Tin Plated Copper with PVC Coating. Clamp-on Style Transformer Protection Connector, Horizontal Cable Leads with 8 Outlets. 6.25 inch High x 14.38 inch Long. AWR - Assembly with Rockets. Stud Size 3 inch. Includes 16 Screws and 8 Insulated Rockets for Connector, 4 Stainless Steel 1/2-13 x 2 inch Screws, 4 Plugs and One 3 inch Split Gasket for Clamp.
Contact for Pricing
Minimum Qty: 3
Multiplier: 3
*Contact for lower quantities*

ABB - Installation Products · ABB
FS 175-7-7018 RLCUK
Flood Seal Tin Plated Copper Bus Connector with EPDM Rubber Coating, 1/0 - 1000 kcmil, 12 Tower, Right and Left Bus with 7018 Bus Connection Kit ( which contains Oxide Inhibiting Compound. (4) Stainless Steel Flat Washers, (1) EPDM Rubber Boot, (1) EPDM Adapter and (1) Copper Pad. ) and Ceiling Mount Bushings. Includes 12 Insulating Rockets, 28 Screws. Approximately 42 inch wide x 2-1/4 inch thick x 6-1/2 inch long.
Contact for Pricing

ABB - Installation Products · ABB
FTN 175-66 CPAWR
PVC Coated Aluminum Transformer Spade Connector, Total 12 Tower/positions (two rows of six), Cable Range 4/0 to 1000 kcmil Aluminum or Copper, Water Tight, Assembled with Insulating Rockets, Center-formed Pad usable area 4 x 4 x 3/4 inch thick with four 9/16 inch Diameter holes on 1-3/4 inch centers. Connector Height 12-1/4 inch, Width 14-1/4 inch, Includes 24 1/2-13 UNC-2B Screws and 12 Insulating Rockets.
Contact for Pricing
Minimum Qty: 3
Multiplier: 3
*Contact for lower quantities*

ABB - Installation Products · ABB
FS 175-7-9356 CUAWR
Tin Plated Copper Bus Connector, EPDM Rubber Coated, 7 Towers, Wire Size 1/0 to 1000 kcmil, Ceiling Mount Bushings. Overall Length 21 inch x 2-1/4 inch Wide. Includes (2) Stainless Steel Studs 1/2-13 x 1-3/4 inch, (14) Screws 1/2-13 x 1-1/4 inch, (7) Insulating Rockets, Silicone Grease, (2) Standoff Insulators, (14) Steel Spring Pins 3/16 x 1-1/4 inch. Studs Assembled using Loctite on 9 inch center.
Contact for Pricing

ABB - Installation Products · ABB
KBU 5791 TN
Tin Plated Aluminum Screw-On Transformer Connector, 1 inch Stud with 5/8 inch and 1 inch Adapter. 6-Hole Pad (2 Rows or 3). Pad 4-3/4 inch wide x 3-1/8 inch x 3/8 inch thick. (6) 9/16 inch Diameter Holes on 1-3/4 inch Center. Includes Oxide Inhibitor and (1) Black Cap and (1) Pink Cap. 4-39/64 x 4-3/4 inches.
Contact for Pricing

ABB - Installation Products · ABB
KB 1-4-175 W/JAM NUT
Aluminum Screw-On Kee-Bar Transformer Connector for Threaded Secondary Stud - 1 inch Stud, Length 7 inches, (4) 9/16 inch Diameter Holes on Pad. Pad measures 1-1/4 tall x 7 inch wide x 1/2 inch thick. Holes on 1-3/4 inch Center. Oxide Inhibitor and Black Cap. Unplated - Bare Finish. Overall 2-53/64 x 7 inch. Includes One Steel 1-14 Jam Nut.
Contact for Pricing

ABB - Installation Products · ABB
FTU 1-44 NAWR
Black PVC Coated Aluminum Screw-On Connector, 1 Inch Stud Size, Double Row Configuration, 7-1/8 inch Length, 6-15/16 inch Width, 8 Outlets (two Rows of Four), with 8 Insulating Rockets. Heavy PVC Insulated Aluminum Body. Bolt Hole 1/2 inch. Greater than 1000 Volts. Includes Hardware (16) 1/2-13 x 1 inch Screws, (1) Steel 1-14 Jam Nut. Connector 6-15/16 inch Tall x 7-1/8 inch wide.
Contact for Pricing
Minimum Qty: 9
Multiplier: 9
*Contact for lower quantities*

ABB - Installation Products · ABB
FTU 6 NAWR
Black PVC Coated Aluminum Flood Seal 125 Series Screw-on Transformer Connectors for Wire Size #12-500 kcmil, Stud size 5/8 inch, length 10-3/4 inch, Height 6-15/16 inch, Outlets 6. Bolt Holes per outlet is 2. Complete Assembly with Six CSN 2011 Insulating Rockets. Hardware included (12) 1/2-13 x 1 inch, and (1) 5/8-11 Steel Jam Nut.
Contact for Pricing